***Official What did you do to your ED/EF/CRX today!***

prepped and sprayed my hatch spoiler in primer (got a HVLP gun for xmas)

First time I've ever sprayed not using a can. Pretty impressed with the lack of overspray from it

http://i225.photobucket.com/albums/d.../EDspoiler.jpg

I approve

Quote:

---

Originally Posted by markismaximus

just buy rear brake assembly off an EG Si or VTi.

They can be bolted up, are newer, and easier to find replacement parts for in AUS.

I'm running EG Vti discs all round on my ED. Front have the discs and calipers swapped over but still using the ED knuckle, rears have the whole rear brake hub (trailing arm is still ED part)



+1. post more photos and create a build thread. There are still some ED junkies around that need a fix

---

Already have brakes man. Not goin to buy another set :p

Quote:

---

Originally Posted by CivicEGSI

Anyone know if Crx and jap spec ED6 have same rear disc brakes? Dont know what to look for when buying them

---

If you mean EF2 (25X models) they come with rear drum, not the same as ED9/EF7 or EF8.

go to start car, break immobilizer remote. FUUUUUUUUUUUUUU
http://distilleryimage7.s3.amazonaws...0a1f96e6_7.jpg

Using an led as tweezers... ghetto as hahaha.

Quote:

---

Originally Posted by chargeR

If you mean EF2 (25X models) they come with rear drum, not the same as ED9/EF7 or EF8.

---

I dont know, dont pressure meeeee

So been a month or so since i been on and the sol is moving slowly. Didnt get everything done prior to xmas but got the mounts in and in 2 weeks going in to get the bushes finally done and check a noise around my right wheel...think the hub or drive shaft has crapped itself.....CRAAAAAPPPPP oh well cars ay.

was the last time here what a poor effort.

Quote:

---

Originally Posted by Chernoby1

go to start car, break immobilizer remote. FUUUUUUUUUUUUUU
http://distilleryimage7.s3.amazonaws...0a1f96e6_7.jpg

Using an led as tweezers... ghetto as hahaha.

---

so the pushbutton pins have snapped from the PCB? or something else wrong with the remote? easy fix brah

The imob lost power, went into a safety loop and can't bw brought out until you do a manual override. To do thus you need a 4 digit pin that I done have. Le sigh. (I've worked out how to do it though)

Biggest problem with the remote was that it's surface mount and I don't have a small enough tip :(

Quote:

---

Originally Posted by Chernoby1

The imob lost power, went into a safety loop and can't bw brought out until you do a manual override. To do thus you need a 4 digit pin that I done have. Le sigh. (I've worked out how to do it though)

Biggest problem with the remote was that it's surface mount and I don't have a small enough tip :(

---

Lol I usually go back to uni to solder my SMD stuff

can anyone link me to some cheap coilovers for my ed6, i checked skunk2 on ebay but i need to change my lca to skunk2 is it worth it?