Red H badge help pls

Printable View

Show 80 post(s) from this thread on one page

03-11-2008, 06:20 AM
tony1234

Nice.I might change my badges too.
23-01-2009, 09:28 PM
K24A

anyone know how to remove the rear honda badge?
23-01-2009, 10:35 PM
tony1234

Quote:

Originally Posted by K24A

anyone know how to remove the rear honda badge?

with some fishing line.
25-01-2009, 01:22 AM
defibros

I can see you got the bonnet trim code..

75120-SEA-R01ZE*

what should i order to replace the chrome one with the colour Graphic gray?

I have an 03 euro

Cheers

Quote:

Originally Posted by Aslam

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00
25-01-2009, 12:00 PM
defibros

oopps being a noob think i found it..

http://www.ozhonda.com/forum/showthr...o+part+numbers

i think i should order 75120-SEA-R01ZG for graphite gray .....
27-01-2009, 02:23 AM
Quest

Quote:

Originally Posted by K24A

anyone know how to remove the rear honda badge?

Dental floss will reduce paint damage....

Get some dental floss (any flavour), and run behind the top of the badge only...(its only the thin double sided top tape that holds badge down)..then it just pulls out (no clips to hold badge down).....then you remove the white plastic lugs....then insert new badge which snaps into place:wave:

Here's some pics on my install

http://i215.photobucket.com/albums/c...t227/backH.jpg

http://i215.photobucket.com/albums/c...7/backHcar.jpg

http://i215.photobucket.com/albums/c...27/RedHOEM.jpg

With the snaps on the back of the new badge, cause the badge to be slightly higher...notice the previous position below badge...polished it out eventually

http://i215.photobucket.com/albums/c...27/smaller.jpg
30-01-2009, 04:50 PM
Mike Star

Quote:

Originally Posted by EUR003act

lol hey! i found the thread...

yeah that badge you have is the EP3 front badge, not the DC5 rear badge...

ok so ive found the correct part numbers:

EP3 Front Red H badge - 75700-S5T-E11
DC5 Rear Red H badge - 75701-S6M-Z01
CL9 Front H badge - 75700-S9A-G00

i mustve got the stock front badge and DC5 badge packaging mixed up :(

sorry buddy! i have now corrected my original post... as for the dealer, im suprised he didnt question it when you asked for a rear badge and it came up with a front badge?

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.
30-01-2009, 05:52 PM
EUR003act

Quote:

Originally Posted by Mike Star

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

yeah the one that says CL9 front badge, thats just the plain silver CL9 front badge.. :thumbsup:
30-01-2009, 07:28 PM
tony1234

Quote:

Originally Posted by Mike Star

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.
30-01-2009, 08:44 PM
Mike Star

Quote:

Originally Posted by tony1234

Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.

Thanks Tony,
I'll probably bite the bullet and get them. I'll see the next time I have a spare $150 and call my Honda guy and order them.
Cheers
31-01-2009, 02:39 PM
integral90

Quote:

Originally Posted by Aslam

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?
01-02-2009, 11:02 AM
EUR003act

Quote:

Originally Posted by integral90

Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?

lol i got those part numbers... theyre all parts i purchased... i can try find the part number for it... im guessing yo want it for the RBC intake?

ive got an aftermarket CAI for the RBC if you want that as well :thumbsup:

Show 80 post(s) from this thread on one page