Printable View
My engine mounts were loose after the B16A conversion and I was driving round without knowing.
Right this have damaged my clutch and cause the weird vibrations?
Its semi race/ HD street specQuote:
Originally Posted by fatboyz39
http://www.teammfactory.com/products...20Clutch&mod=B
Middle one
So it vibrates when your over 40km/hr under acceleration? or no acceleration?
Vibration in cornering?
Need more details
have you got that rubber balancer on drive shaft ?
sounds like you diff in you box is playing up
what a great motor you bought luke lol
OKQuote:
Originally Posted by Benson
Vibrating when I turning left
no vibrating at any speed if I'm not in gear.
Dose not make a difference if I'm accelerating or not
Dose not vibrate if I'm driving straight accelerating or rolling
Its a brand new M-Factory LSD in a recon box broQuote:
Originally Posted by 90LAN
save ur money, let me get mine on the road and i'll tell ya how my energy inserts are going. THey were alot cheaper.
P.S exchange rate is around 1:0.77 currently so not too bad
Quote:
Originally Posted by Lukezen27
Got a link to the inserts Hao?Quote:
Originally Posted by Limbo
Well I can't fuking believe it..........
Just picked up my car from Hannys with the new clutch installed and thirds crunching up and down gears..........
Looks like there was some damage to the syincro while driving out to Hannys as my clutch died.
Any tricks on fixing this like thicker box oil maybe?
u can try some of that oil stabiliser stuff from lucas, i used that before and it helped abit.
The other thing is also 50% auto transmission fluid, is supose to help crunching boxes.
:thumbsup: Nice...Quote:
Originally Posted by Lukezen27
Now that it's been apart & reassembled...Quote:
Originally Posted by Lukezen27
How's this issue?
Still there? or is it fixed?
Reconditioned or overhauled & checked?Quote:
Originally Posted by Lukezen27
There a huge differnce in price...
Just throwing in the LSD could be your noise if end float wasn't checked.
How much did you spend?
Is the issue at all rpm ranges or only high rpm?Quote:
Originally Posted by Lukezen27
Might also be a selector fork if you were forcing it previously....
Quote:
Originally Posted by TODA AU
Any RPM
He's some good news and the reason I didn't notice it driving from hannys to you Adrian...
Only starts crunching after the car warms up and the box must be hot..
Drive it round the block a few times this morning without one crunch before the cars warm.
So the box needs bleeding yeah?
Your synros are gone.
Na all goodQuote:
Originally Posted by fatboyz39
Must have jsut been air in there as it was the first ime it had been driven after the clutch change...
No crunching anymore hot all cold :thumbsup: