idle problems and different exhaust pitch

i have put the leads and plugs in correctly all firmly to torque.
my engine just shakes mildy at idle, and also sputters lightly when letting go of the throttle when cruisin and by just standing from front of car the engine block shakes more too than usual - and my engine mounts are good, and the zaust rumbles too..and no 'check engine' light does not come on..is it the dizzy?fuel system?
should i injector clean it, and clean the intake manny? help....
...aarrgghh have to get rid of it otherwise something might happen down the long run..

Quote:

---

Originally Posted by joyride

enough bickering you two. i already asked you once to cut it out.

---

someones gotta deal with the very poor advice being dealt out & its obviously not gonna be u.
the guy is advocating painting ignition leads,ask anybody out in the field,NRMA guys are good example,how many times they seen people getting belted off ignition leads & heres someone in this thread advocating that playing with the integrity of ignition lead insulation is good for your car,let alone someones good health.

Quote:

---

Originally Posted by vtec0945m

i have put the leads and plugs in correctly all firmly to torque.
my engine just shakes mildy at idle, and also sputters lightly when letting go of the throttle when cruisin and by just standing from front of car the engine block shakes more too than usual - and my engine mounts are good, and the zaust rumbles too..and no 'check engine' light does not come on..is it the dizzy?fuel system?
should i injector clean it, and clean the intake manny? help....
...aarrgghh have to get rid of it otherwise something might happen down the long run..

---

check the first link i already pointed u to.

i cleaned out my egr valve, and runs better now more responisive..but another problem, the engine sputters when lifting off accelerator