Can a b18c7 head be put on a b18c2 ???

lol Can someone please show me how to post pictures im abit of a Freshie to computers.

Thanks

Please someone show me how to upload pictures Im abit a freshman here.

cheers

http://s942.photobucket.com/albums/a...Picture010.jpg

http://s942.photobucket.com/albums/a...Picture013.jpg

http://s942.photobucket.com/albums/a...Picture014.jpg

Just added some pictures Do you guys reckon thats bit i cracked is the head.
???

Cheers guys

looks like its from the rocker assembly, on most hondas the rear bolts for the rocker cover are held on buy the head and the front are held down to the rocker assembly

somebody else will have to clarify though as im not 100% with B series head anatomy ... if it was a D i could tell you lol

i never opened the rocker cover on my B18c

but from the look of it you only need to replace the part that is broken

and as for the B18c7 conversion ... you are much better off building the VTIR engine ...
- Intake
- 4-2-1 Headers
- 2.25" Exhaust
- Skunk2 StageII Cam
- Skunk2 Intake Manifold (VTIR version)
- Earth kit
- Apexi VAFCII + Tune
- Skunk2 Shift Knob

= happy

Thanks for the Info man.

You gave me comfort. Im serious.

Intake
- 4-2-1 Headers
- 2.25" Exhaust
- Skunk2 StageII Cam
- Skunk2 Intake Manifold (VTIR version)
- Earth kit
- Apexi VAFCII + Tune
- Skunk2 Shift Knob

= happy



i HAVE most of them except.

Skunk2 StageII Cam And earth kit. I know about the cams but Earth kit sounds like wires??

good earth kit, some performance ignition leads and some good quality spark plugs gives the car a good ground and spark =)

so get urself some cams + adjustable cam gear and a good tune and you will be happy =D

Quote:

---

Originally Posted by JayTea18

Thanks for the Info man.

You gave me comfort. Im serious.

Intake
- 4-2-1 Headers
- 2.25" Exhaust
- Skunk2 StageII Cam
- Skunk2 Intake Manifold (VTIR version)
- Earth kit
- Apexi VAFCII + Tune
- Skunk2 Shift Knob

= happy



i HAVE most of them except.

Skunk2 StageII Cam And earth kit. I know about the cams but Earth kit sounds like wires??

---

by running all those mods and also if you run cams. you will need a proper ecu ie hondata s200/s300 or chrome, power fc or something. running a piggyback on those mods is not recommended as its limited to tuning.

a vafc is the biggest waste of money no joke.

after a good 20,000 on a build on my car i cna tell you ecu. makes a big difference. cams do too. but ecu is more if not the most important. especially if you get cams, you might want to get a tune + cold start tune(800ish). so you dont have to sit in your car and keep revving first time you turn it on everyday.

agreed ... only reason i mentioned VAFCII is because im not full bottle on proper ECU management packages

the earth kit is a waste of money , unless your after clearer sounding system.