Shit yeah those black ones look hott. Wonder if i can squeeze 9.5s on there. Anyone know if 9.5" rims with a +38 offset will fit the DC5R???
Printable View
Shit yeah those black ones look hott. Wonder if i can squeeze 9.5s on there. Anyone know if 9.5" rims with a +38 offset will fit the DC5R???
no chance, rear inner lip will grind on the trailing arm, need at least +30 to run a 9.5 succcessfully.Quote:
Originally Posted by Nuci
So ideally i'd want 18x9, +38 offset. That would fit and look flush-ish?
minimum +35, im +35 in the rear with 1.5 degrees neg and im still grinding the rear under heavy cornering fml, new suspension cant come soon enough :( if its enkei they should have it in +30 or +35 which is more ideal
+38 is the lowest it goes for that rim in that size... :( Considering its not a track car and that I have rolled guards and fully adjustable suspension (height, camber) will i be able to run them?
you can run them, a mate runs the same size and offset with XD9's, just check the clearance after they are on, the N+ should be stiff enough to handle the rear compression. I think the black DC5 page before is on +9.5 but they are low 20's offset off memory, looks soo nice but extremely non-functional...
Looks like I know what the next purchase is then :) Im over my FN2R rims. They look ok for stock wheels, but they weigh a bloody ton!
should look great!! I was surprised how light my RPF's were, X9 rim was lighter than the standard X7 rim :)
What's the specs on these babys?Quote:
Originally Posted by AE092
I couldn't tell you as I don't know but they are a Limited Edition version based on the +M version of the NT03's - they look to be at least 9.5inch wide, 10 would be my pick.
The old Centrax DC5 had the older NT03's on theirs. They were 10 spoke ones.