How would i connect this to a vafc??
which wires do i have to link the led's to??
Printable View
How would i connect this to a vafc??
which wires do i have to link the led's to??
look on ur VAFC install guide/ instruction manual..
it MIGHT have it on there.. not 100% sure---
does ur VAFC have rev output? if it does.. u can do it-
but yeh.. take a look in ur instruction manual.. this is how mr learner found it---
just wondering, for the (-) wat wire did u connect that 2 rsm ? is it the white, for negative trigger ?
bump.. i need some help on installing this ?? anyone help
LOL damn this is old thread.. but anyways .. wat help is needed?
the white wire on the RSM is what you want to connect up and also a power source for the light. (pretty sure :D)
anyways.. seriously Look in your instructions from the RSM and it will show you how towards the back i think. It has been a while...
whoa only just noticed this thread now.... velli kewl :D
connect it to the white wire from the RSM for ground (thats the switching ground) and splice into the RSM or the ECU's power
u can really go to any power source... so what ever you can get your wires on. give it a test and see if it works... (set rev @ lowest) rev to that particular point and your light should work :)
just a question, which wires do u connect to the light?