cannot find link...
Printable View
cannot find link...
i am unsure of where the image is from..
can anyone confirm with a picture of their vss?
Speaking of cable speedos, I've been looking all over the firewall to see where it comes out so I can follow it,but can't find it. Also on that pic, at the bottom of it, is that the starter motor? Just an enlightenment as to why I want to change my speed sensor, every now and again the speedo wants to just drop out like it stops reading the speed. This will happen when ever it wants, a bit more often when it's cold. And the cable's not gripping cause it doesn't flick, it just drops if you get what I mean.
Have owned my EF9 for almost 6 years now and you don't need half the manual stuff - it's common sense.
Just get a new VSS from a NZ wrecker - it took me 10 minutes to replace mine.
i having the same problem with my vss. I will be driving and all of the sudden it drops to 0km sometimes it pops straight back up to speed other times it will stay down for a whil and just today it didnt come back up! How do i fix?
I've been told I have to replace the speed sensor, which judging by what I've got to get past (hoses and stuff) it looks like it's going to be a freakin nightmare
I have been having the same problem.. every now and then it just stops.. sometimes doesnt happen for a few days but annoys me when it does..
Added thread to sticky
and the suplied pic of what should be the sensor.... that shit dont exist on my car.... i got this electronic thing there going into what the cable was conected too
I havent stuffed with the vss (dont want to either ;) ).. here is a pic from the workshop manual if u dont have it already
http://i2.tinypic.com/oua1wg.jpg
also i recently used b18 studs for the exhaust manifold and a 93 CRX (gen3) exhaust mani gasket.. seems ok.. will get part numbers soon hopefully
anyone know if the timing belt and crank/timing seal from a gen 3 crx or ek vtir (audm a2 engines) can be used?
i presume so??
yes you can use them