DC5 Rims on DC2R,possible?

Quote:

---

Originally Posted by timofytit

DC5R offset is 114, that may help you.

---

114 offset?
or did u mean 5x114.3?

Quote:

---

Originally Posted by |N|

114 offset?
or did u mean 5x114.3?

---

Thats the ones

audm dc5r stock rims are +45

fitting jdm dc5r rims would need a spacer cos they are +60

someone post up pics

i thougth jdm dc5r rims fit straight on without spacers.. im not entirely sure but they do look damn sexy..

http://i35.photobucket.com/albums/d1...7-0758_IMG.jpg

:p

Quote:

---

Originally Posted by nipnip

do u happen to have blue number plates?

---

nope...not me...i'm in Melb :p

ask AH_HUH about his rims...
his got DC5R rims on his car...
and he had to purchase spacers...

Quote:

---

Originally Posted by matt

audm dc5r stock rims are +45

fitting jdm dc5r rims would need a spacer cos they are +60

---

jdm dc5 rims are +65 offset

both audm and jdm have a PCD of 5 x 114.3

Quote:

---

Originally Posted by 1900-hustler

i thougth jdm dc5r rims fit straight on without spacers.. im not entirely sure but they do look damn sexy..

http://i35.photobucket.com/albums/d1...7-0758_IMG.jpg

---

These rims remind me of the ROH blades...i prefer the AUDM

any one got pics of AUSDM DC5 rim on a black dc2R?

Quote:

---

Originally Posted by arron

problem with the caliper clearance? really? i would have thought that there wouldnt be a prob due to the dc5r rim being a bigger diameter wheel.

im guessing this was from experience... im actually planning to get the JDM DC5R rim onto my DC2R. if i did that, would i have an issue with the caliper clearnace (I have stock brakes) and would i also need a spacer as mentioned above

---

it should be ok....but it may sit a bit in the guard....spacer wll fix it...but even without spacer it will clear anything.....I got a set of DC5R stockies btw....anyone want?:p

Quote:

---

Originally Posted by TeMp

jdm dc5 rims are +65 offset

---

wrong they are +60

this is from honda japan website

ホイールのPCD、オフセット量を教えて。
それぞれ以下の通りです。
17インチ
・PCD：114.3mm
・オフセット：60mm
・穴数：5穴


in japlish

PCD of the wheel, teaching the offset quantity.
Respectively it is as follows.
17 inches
PCD: 114.3mm
offset: The number of 60mm
holes: 5 holes