I had my Euro dynoed today

Quote:

---

Originally Posted by BusterSonic12

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

---

Different dyno, different day. Enough said.

Quote:

---

Originally Posted by CL9-K24A3

Hey, i also went there with ALN and one other euro in the afternoon session. i got 111.5 kw. its too low actually for my current engine mods. my current engine mods are Comptech header, Skunk2 Racing catback, Injen CAI, & Unortodox Racing Pulley sets.

---

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

Quote:

---

Originally Posted by ALN

I got comptech airbox,comptech header, FGK cat back, metal cat, 64mm TB, UR pulley, HKS spark plug,and comptech flywheel and exedy clutch( well actually, I don't think helping on making power):D

---

Nice mods ALN. :D Where did you get the 64mm TB from? Did you have to bore the stock one with a machine?

How much torque did you get?

My wagon only got 86kW which is a bit sus. cause it got 107kW in NZ o.O
But at least I got decent torque

Quote:

---

Originally Posted by sodaz

Nice mods ALN. :D Where did you get the 64mm TB from? Did you have to bore the stock one with a machine?

---

I bored the stock one to straight through 64 mm and changed the butterfly to fit.

Quote:

---

Originally Posted by BusterSonic12

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

---

His car is auto as well. In what gear your car was dynod? his car was dynod on the 4th gear.

Quote:

---

Originally Posted by yfin

Different dyno, different day. Enough said.

---

:thumbsup: very true, even in the same dyno different day can result different figure.

Quote:

---

Originally Posted by ALN

His car is auto as well. In what gear your car was dynod? his car was dynod on the 4th gear.

---

4th gear. as well. i only hav intake + exhaust + apexi neo at the time.
is that your car on your dp? CF bonnet?? :p does the bigger TB give u much gain that u can feel?

Quote:

---

Originally Posted by sodaz

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

---

If I didn't read the acura-tsx forum, I would not even know if there vibration that others experienced. I have been using the header alsmot 1.5 year, I haven't really noticed if there is any vibration.:D

Quote:

---

Originally Posted by BusterSonic12

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

---

They ran theirs on a Dynamics Test System dyno, which supposedly reads lower than a Dyno Dynamics dyno.

Quote:

---

Originally Posted by BusterSonic12

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

---

I forgot to tell you guys that my car is auto :p but 111.5 kw its still too low for my current mods even my car is auto :p

Quote:

---

Originally Posted by sodaz

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

---

Nope,i never have an experienced like that :D

Quote:

---

Originally Posted by CL9-K24A3

Nope,i never have an experienced like that :D

---

That's great. I wonder why it occurs with TSXs but not Euros considering that they are pretty much the same car.