i shall say alot smaller, myself have only heard of 2 sub frame tearouts from in proper installations on em.
but that was due to not tighting the bolts tight enough.
these are on the eg/dc chassis i shall add.
but plenty on the ek.
Printable View
i shall say alot smaller, myself have only heard of 2 sub frame tearouts from in proper installations on em.
but that was due to not tighting the bolts tight enough.
these are on the eg/dc chassis i shall add.
but plenty on the ek.
ive heard of 3 from proper installation , just normal wear. Add my old EG , got the subframe plucked out from a whiteline "replacement" swaybar ( POS 1st gen thing).
So thats 6 EG/DCs , for like 30 ek's.
Still , show me a link of a failed ASR brace.
So let me get this right, The Whiteline sway bar does not mount to factory holes in the car? This is why you need a mounting kit? And its the whiteline mounting kit that is not good? so it would be allright to run a whiteline sway with a ASR brace?
Has Anyone ever run EIBACH sway bars?
http://cgi.ebay.com/ebaymotors/ws/eB...RL:MOTORS:1123
17mm rear 26mm front
Ben your wrong. The whiteline bars fit with ASR brace.
i'm running whiteline 22mm adjustable with ASR brace, no issues. Just need the brackets generic swaybar mounts from supercheap. Cost $20.
Do show us all some pix :)Quote:
Originally Posted by Limbo
I should of added that whiteline bars have the tendency to sometimes be alittle different one to the next. I have tried fitting before and it would not clear due to the bends. (also in the past there has been issues with whiteline bars not having the same clearance than a similar item etc)
be careful with whiteline lyle, recently it was rumoured that they were bought out or had a merger with a bush company and they keep no stock on the shelf and have been 'iffy' on quality. whiteline 12 months ago is awesome imo. that being said i have also had my RSB for 2+ years with no ill affects.
hard decision on what to buy nowadays imo
So bach to origional question
what are some manufactures that make sway bars in these sizes for an Eg civic? and where can i obtain some
also the Whiteline swaybars, are the designed so they just cant bolt on to factory honda holes / points, you need a mounting kit in which to do so?
, and the so called problem with whiteline is the mounting kit and not the swaybar itself? so really if a whiteline sway were used with a ASR brace it would infact be good?
Anyone Tried EIBACH Sway bars? 26mm from 17mm rear though
http://cgi.ebay.com/ebaymotors/ws/eB...RL:MOTORS:1123
Sexc86 , when searching online look up "EG6" parts to help u out for any JDM replacement stuff
will the ek9 CTR sway bars suit Eg? or only Dc2r
While yous are talking about swaybars, are thicker always better?
And is there a benefit to having a BEAKS lower tie bar if you have an ASR brace?
And this could possibly relate to Lyle if CTR sways fit his car but,
Are CTR front + rear sways the best option?
Bump any new info? what are the size options available for CTR / ITR sway bars? that will suit an EG with an ASR?