> just buy an ASR brace and a CTR sway bar
x3!
Yonas at JDMYard usually has a pile of CTR sways bars with end links.
Alternative is a 14mm rear sway from an EK4. visit your favourite honda wrecker.
No need for sub-frame brace with the 14mm rear sway.
> 98 cxi hatch
You'll need a 26mm front sway to match it.
Look at same generation CR-V at wreckers
Get some new Superpro sway bar bushes to maximize its effectiveness.
Poly motor mounts. Once you get a bit of wheel hop, you'll thank me.
cheap-o Ebay torque arm, tighen it up good and put up with the cabin vibration.
http://www.familyonboard.com/media/s...super_lock.jpg
Child seat restraint/seat belt clamp lock thingie. $8 at Repco.
Best bang-for buck.
Place it on your selt belt, to lock out the slack. Tighten it up real good.
You'll need a deep breath and time to get used to driving without squirming
around in the seat.
Ghetto racing harness, as long as you can put up with the constant tension.
A stock EK civic can generate a fair bit of G force, which you'll never realize cause the OEM seat belt allows so much freedom.
> already have a RAM intake
Sell it.
Eat Maggi noodles for a month, and cut out the booze/smokes. Yes you can do it.
Then buy some good rubber.
Once, you'be been bitten by the bug, start saving for an OBX LSD.
Nick.

