Twinloop muffler

Quote:

---

Originally Posted by MWAKU

street=s10
track=s12

remember that the resonator/other piping stuff also reduces sound

---

track = Straight pipes

run a canon or straught thru muffler if you want better performance.

Just called an Xforce supplier and was told S10 twinloops are no longer in production due to problems with 'whistling' and thus they were only selling the S12 oval design.

Looks like there is no other choice.

Quote:

---

Originally Posted by MWAKU

street=s10
track=s12

remember that the resonator/other piping stuff also reduces sound

---

true to an extent but resonators do not reduce volume. they 'resonate' the sound and slow them down creating a deeper tone....

the proper ones are "mid mufflers" which are different to hotdogs/resos/etc...:thumbsup:

Thanks guys
Just purchased S12 xforce twin loop muffler from Race Nation :thumbsup:

Will give a review on it when i get it put on

Quote:

---

Originally Posted by DC4Integra98

Thanks guys
Just purchased S12 xforce twin loop muffler from Race Nation :thumbsup:

Will give a review on it when i get it put on

---

don't forget sound clip... preferable at noise test standards :)
- muffler tip level
- 45* angle
- 50cm distance
- etc

Quote:

---

Originally Posted by dsp26

don't forget sound clip... preferable at noise test standards :)
- muffler tip level
- 45* angle
- 50cm distance
- etc

---

will do :)

Quote:

---

Originally Posted by dsp26

don't forget sound clip... preferable at noise test standards :)
- muffler tip level
- 45* angle
- 50cm distance
- etc

---

its 1m actually. ive been epa'd more than once

Quote:

---

Originally Posted by aimre

its 1m actually. ive been epa'd more than once

---

lol... oh yeah...

i'm just curious what it sounds like as i may switch over to the oval one as i've always had my eye on it.... the ITR muffler on 2.5in mandrel with one reso buzzes like an oem muffler with a big exhaust... sounds like a freakin lawnmower... makes me hate the sound of vtec

Does anyone know if I should be asking for them to do up a axel back pipe to weld the muffler on? (for DC2/4)

This should bump up the price of installation I'm guessing, just wondering whether its necessary.
Thanks

Just an update, went to install early this morning but realised that I had been sent the wrong offset. Give me a couple of weeks before I get a review a up...

Offset for a muffler? I know about wheel offsets.... but whats the offset for a muffler? I'm looking at getting something from XForce too... either the S12... or half thinking about the varex cannon type. Anyone know the correct (optimal) piping diameter for the FD1?