Mightymouse (k26 gen2 CRX) i believe are selling bonnets also.
That may help. The main question there is how much is it $$$
Printable View
Mightymouse (k26 gen2 CRX) i believe are selling bonnets also.
That may help. The main question there is how much is it $$$
I know of a cf sir style hood to fit aus crx for 600 but running a cf hood or cutting the webbing is a noticeable defect... Trying to keep it streetable and defect free as possible.
Can space the bonnet... I would like to space it 1 inch max, http://farm7.staticflickr.com/6093/6...5325bbd1c1.jpg this is with the butterfly valve in the IM and there is no chance of it latching so hopefully with mine removed it will just need a slight raise to clear the VC
Also going to look at raising the latch/rad support to gain a lil clearance in the front
Oh crap that high cap than I though it would be
Could you post a pic of side view of the car bonnet area and pic of engine bay?
Is there can chance your modifed the IM or custom using stock IM runners
Just idea
so your sayinh this is not streetable?
https://fbcdn-sphotos-a.akamaihd.net...46173408_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...84957486_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...01271075_n.jpg
Your in Qld their in QLD.
trail fit the bonnet if it works order it up. They'll make it fit to the stock latch. Its even an Si as well.
Paint it up to the stock burgany colour and your done.
That's not my car... Just another with the same kit over in USA... In that pic he was running the butterfly valves so mine will be lower significantly.Quote:
Originally Posted by pat88c
Will try and position the motor in the bay tomoro night if I have time/cbf..
Can't stop thinking about LSD but i will see how bad the open diff is before I plunge into it
http://www.motifake.com/image/demoti...1251922290.jpgQuote:
Originally Posted by RIHIA
americans love the h series, check out my build thread h22a in a eg, was a pretty much 2 cables before i got it started but due to personal reasons had to scrape it
Bringing up on old thead but are there any updates?