Printable View
Tell dem phoo's to come to the track ...Quote:
Originally Posted by spoondc2
http://www.uberreview.com/wp-content...s/snickers.jpg
Cauz I pity tha phoo dat don't race his Honda
...
ON TOPIC
Aiming to get the car around QR in the 60 second range by the end of next year, anything faster would be a bonus :wave:
good luck.. id b happy with low 64s :D
It helps alot after engine conversion :wave:
you probably can just upgrade your engine internals
hey does anybody know how much rain would slow you down by on the sprint track approx.
Really dependsQuote:
Originally Posted by macoman69
How wet was it? If it's not like flooded i'll say less than 1 sec
Also depends on your tyres and their pressures.
as much as 4-5 seconds.Quote:
Originally Posted by macoman69
i know because i have done QR Sprint layout when it was pissing down rain :)
p.s. this is on road tyres with 38psi all around.
Wow..... ok
hey man, just been racing at morgan park. we were driving on the longest track. from the in car video's that i took the closest time that i can sus out for one lap was around the 1m18sec or so. a mate was timing me over the weekend and i think he said that i got a 1m16sec or so on the last day.
the car is a 1988 CRX with a b16a daily driven street car.
First post updated :D
Luis and I will be out on the 5th to run with the S2000 guys ... Luis will be the EG passing them :P
Ej8 - 63.1 - road tyres
Updated Bob-lah !!!
Now hurry up and finish your Civic so you can come play with us again :D
hey man thanks for putting up the time, i forgot to say what tyres i was using, they were road legal semi racing Advan's.
No probs :thumbsup:Quote:
Originally Posted by intacivic16v
A048's I assume, or did you have a new set of AO50 ?
Awesome race conditions today and to my surprised they put me in Group one ...
Must of helped because out popped a ...
60.8!!!
Absolutely stoked with the time as I've done absolutely nothing to the block which includes the stock headers :D
Thanks to Ivan for tuning the car and a special thanks for Karl for pitting to me today and helping with setup ... your a fu<kin' legend champ :thumbsup:
good job mate !!1
Cheers Lan ...
Funny picture from today's racing ...
http://image-cache.boostcruising.com...1725296418.jpg
Think they are trying hard enough :D
no luck for me today...../.\
wow you hi power racing guys are doing quick times :D
wish i had money to race again >.<
pics uploaded....at Gallery guys
I wish i've got a car to race :(Quote:
Originally Posted by EG5[KRT]
And able to crack 60s with an un-hybrid and un-stripped car
So quick to gloat :pQuote:
Originally Posted by GTRVspec95
All I did was get it tuned and never thought for a minute that I'd actually shave over a second off my pb because of it :DQuote:
Originally Posted by SuperDave
Louis your car is still in development, you have something new on it almost everytime you go out :p
It's shown it has plenty of potential to chase down the Birkins/Lotus 7s once you get use to the setup again :thumbsup:
well done, that's real quick. gotta love the stock motors!
Stock JDM headers too :cool:Quote:
Originally Posted by barefootbonzai
http://i209.photobucket.com/albums/b...r/P1010331.jpg
Excuse the radiator fluid from previous track day :p
QR Sprints: 63.100s
Road or semi slick tyre ?Quote:
Originally Posted by timofytit
QR Sprint - 67.44 (street tyres - Bridgestone RE050)
Bah, im out of top 10.
Sigh.... need more B16s :(
Semi's
Agree...... :thumbsup:Quote:
Originally Posted by SPEEDCORE
But actually you've got the fastest time with B16 engine unhybrid
Bench mark time is 59.3 with b16a fellas :P We did it a couple of yrs ago in the SiR crx b4 the b20
:thumbsup: hehe
Yeah.... well..... would have been nice to piliot something considerably lighter with the same engine. They really are a fun engine. :)Quote:
Originally Posted by spoondc2
Can i change my time, just looked on the QR Website, and my best time was 63.05s Shouldn't change anything, but hey, its marginally better than last time i tracked it.
i agree!!Quote:
Originally Posted by SPEEDCORE
Missed my car damn... Wish I got time to finish the EG project
Though that my career is lot more important
guess im the fastest d16 :D yay yay lol
While checking the results I saw someone in the Wednesday Group rip out a 60 in Road 4.
Might have to visit QR on a Wednesday to have a play with the Type-R :D
http://www.qldraceways.com.au/Admini...ies_points.mht
Thats not the White dc5r on Mugan rims is it?
Possibly Dave ...Quote:
Originally Posted by SuperDave
It lists it as a White Integra Type-R.
I'm just wondering how much work it's got on it ?
3min:00sec:76 for 4laps standing start for the small track at Morgan Park.
1988 CRX N/A B16B engine, Advan semi's
Just wondering how I would write that into the table ?Quote:
Originally Posted by intacivic16v
Is that 76 seconds for a lap and 3 minutes for a full 4 laps ?
I have you down for -
76.00 - intacivic16v - CRX - EF - B16 - semi slicks (Advan)
Would that be correct still ?
PS. Lakeside has been added to the list.
Lakeside isnt open jamie.
They're already running private days out thereQuote:
Originally Posted by thebob
http://www.boostcruising.com/forums/...30&hl=lakeside
I'd assume it's only a matter of time before it's up and running with a full sprints series out there.
Just beware of that crest coming out of the carousel seen bad things happen there >.< !!!
Yes it is. :thumbsup:
Well my month just got made. My dad use to race motor bikes there, he has always said its one of the best tracks. Now i really need to pull my finger out and finish. When is the last round of SAS this year jamie. Hopefully i can make the last one.
To race there you have to have a fully registered car that passes respective sound level tests i believe.
Having said that, my mates e30 bmw managed to pass and its hella loud.
What DB levels? Looks like open headers are out of the question. haha
it seems to be 92.2dB
sourceQuote:
Your car will have to pass two sound tests; one static and one active. The static test will be carried out in a specified area and will require the engine to be taken to 5000 RPM and held for 5 seconds. A measurement with a calibrated sound level meter will be taken 8 metres behind the car and the reading MUST be under 92.2 dB(A).
so yea, open headers are probably out haha
edit - confirmed 92.2dB - everything you need to know here
Queensland Raceway has the following rounds left for both Wednesday and Saturday sprints
WAS June 4th
WAS July 9th
WAS August 27th
SAS August 30th
SAS September 20th
WAS October 1st
SAS October 18th
SAS November 29th
WAS December 3rd
Ahh sweet, my birthday is the 28/11 so it should be done.
Better update my times again, 62.75s now. Not a real good day, ran out of fuel in the first session and shredded the LF semi on the last lap of the 3rd session.
List updated.
Would it not be ((3 x 60) + 0.76) / 4 = 45.19s?Quote:
Originally Posted by GTRVspec95
Lakeside Raceway has re-open and I have the privilege of racing on it in April and soon again this coming Queens Birthday holiday. It is truly a beautiful track and sooooo much better (but not as forgiving) than QR. The place itself is in a dire state but I heard from the management that the whole track will be re-surfaced again later this year.
I was bloody nervious during my 1st session out there but was driving faster as I familiarise myself with the track. Managed to score a pb of 67:05 sec (hand timed) :) It suits the DC2R very well and i was running Federals 595RS-R.
By the way, the management is VERY strict on the 92db limit. One GTR and RX7 FC were banned from driving for the rest of the day because they were too loud.
List updated.
I'm taking hand times from Lakeside at the moment as I assume they don't have a permanent timing system there as of yet.
It's going to be tricky for people to get their v-tec powered Honda's down to a reasonable level at Lakeside ... maybe we should run turbos to quiet it down :D
Yes indeed, though i'm still running a factory exhaust, for that reason.
Quote:
Originally Posted by GTRVspec95
correct, there is no electricity in the place at the moment :(Quote:
Originally Posted by GTRVspec95
I have I/H/E & high-flow cat setup on my car and clocked 78db at 5000rpm. The tester had no idea that vtec engaged at 5800rpm :p
hopefully the new setup will allow me to race there. Fingers crossed.
If you're looking for a loop hole to go to Lakeside, there ain't one. They only care about peak noise, not the standard test. But 92.2dB is lower than what is street legal (95dB if memory serves me correct).Quote:
Originally Posted by G_Vtec
Great times people..... keep it up :thumbsup:
That one on the 30th August... QR website says its on the 6th Sept...Quote:
Originally Posted by GTRVspec95
GAH !!!Quote:
Originally Posted by turtleEK1
I posted the dates originally issued at the beginning of the year, however it's not the first time that QR have published a date only to move it :confused:
oh bummer, I got bumped out of top 10.....
Great times guys, you do HONDA proud!
no more honda for baboo :P
buy my civic off me lol at least then it will have a fast driver :D
Need to turn this
http://www.caradvice.com.au/wp-conte...yOdyssey06.jpg
into this
http://mitsuru-1029.cocolog-nifty.co...ap_odyssey.jpg
That would be a fair trade in for the R34 :thumbsup:Quote:
Originally Posted by baboo
:D
Not sure if you're keeping a top 10 thing happening with the QR sprint circuit, but my first time ever out I recorded 64.71s. Bit slow compared to yours but I'm happy with a stock AU DC5R.
Mate i know this isn't a Queensland track, but we get a lot of queensland car down for it, and it is only just below to boarder. Grafton Hillclimb 52sec:23 1988 CRX with N/A B16B Kuhmo Semi's (current class record for 3J club cars improved production under 1600cc, broke record this weekend) daily driven road car
Congrats, cant wait to head out your way at the start of next year to run mine.
Went out to Lakeside the other day (20min from my place YAY). Looks like it would be a fun course... might have to give it a shot oneday.
Robi, Do IT!!! You will love it. And its on a sunday, so no soccer excuses. Hehehehe.Quote:
Originally Posted by 45SET
Morgan park high 1min 13sec's. B16B Falken Azzena's
Nice 3 second chop :thumbsup:Quote:
Originally Posted by intacivic16v
List updated :D
What time did TOUGE JDM ITR run at lakeside, i seen pics.
heres my times from the last month of sprints
Lakeside
67.19 - [CRA23] - JDM DC2R - B18 - Street (Bridgestone RE01R)
QR Sprint
63.42 - [CRA23] - JDM DC2R - B18 - Semi Slick (Yoko Advan A050)
QR Clubman
68.58 - [CRA23] - JDM DC2R - B18 - Semi Slick (Yoko Advan A050)
List updated :D
I'm only keeping the top ten for Qr sprints as so many people do it ... so in other words ... everyone needs to go faster :p
Going to try for a PB this weekend with any luck :D