What about mounting it in the glove box or the A-pillar?Quote:
Originally Posted by xenonkuraz
Printable View
What about mounting it in the glove box or the A-pillar?Quote:
Originally Posted by xenonkuraz
http://www.collegehillshonda.com/ins...oglightkit.pdfQuote:
Originally Posted by Baygon
20a fuse in 6?
Holy what was I mounting? lolQuote:
Originally Posted by MassiEk4
Quote:
Originally Posted by xenonkuraz
5charQuote:
Originally Posted by xenonkuraz
Foggies kit came with one 15a only. Could that be the problem??Quote:
Originally Posted by lolmclol
Might be, not 100% sure, I'm not that technical sorry :-PQuote:
Originally Posted by Baygon
Lol thankQuote:
Originally Posted by lolmclol
Did you let Michael Nguyen (YSO-SRS Kswapped DC2R) Test drive your car?Quote:
Originally Posted by xenonkuraz
Went camping with him on the weekend and he was telling me how nice your turbo setup is
and that i should supercharge my FD2 haha
has anyone here had experience with frp (fibre glass) bumpers, how are they?
thanks for the tip guys (on the previous page)
Car kicked over first go thank ****.
It was sooooooo dirty. I still kissed it tho.
Car kicked over first go thank ****.
It was sooooooo dirty. I still kissed it tho.
Yeah I did a while back. His dc2 was faster! lolQuote:
Originally Posted by Honda_FD
No experience, but the general consensus is don't do it.Quote:
Originally Posted by starocean01
Crocodiledundoit
Lol yeah. I have a video of him taking me and a friend for a spin in it. It was an amazing experience.Quote:
Originally Posted by xenonkuraz
But that was his old K24. Got to 230km/h in no time and complete stop on the freeway and did a launch.
This was at 3am on the RingRoad. So no car were on the freeway.
Is that hissing/sucking noise because of the Silicone piping and a Pod filter with a velocity stack?
I've seen videos on Injen and other CAI and they dont sound that loud
@2:10
http://www.youtube.com/watch?v=c1xyYCpvqFw
On your own personal private road and race track, right Honda_FD?
Clearly you aren't talking about the public roads here.
Yup. I would never.Quote:
Originally Posted by lolmclol
Tried a 25 fuse in the fuse slot, still no go, bloody thing wont turn on!Quote:
Originally Posted by lolmclol
Got a multimetre to see if there's any current flowing through to the foglights?Quote:
Originally Posted by Baygon
Hey guys got my car checked today and I need to replace the front bumper and the bumper brackets, left head light is cracked a little bit and the reinforcement bar is damaged as well but I'm told I don't have to replace those if im tight on money... I guess I'm gona start looking at wreckers...
edit* called all the wreckers from the list on ozhonda..only Honbits have the parts I need, around $650 for the lot (not including headlight) and $150 for just the internal bits..is this price about right?
on your own track
ring road
lold
ps im in sunshine atm if you wanna check out my car for inspiration pm me
Lol really? Im near dandy. At my cousins house for birthday dinner.Quote:
Originally Posted by xenonkuraz
Im trying not to drive my civic as much till the weekend when I get my wheel alignment. My Toe is so far off.
wrecking my tyres. So im in mums Corolla mean time.
And about those stickers.... Can you do something by saturday? im going back up that direction
Dat Toe Wear
http://i194.photobucket.com/albums/z...45457680_o.jpg
That's one homo tyre
Sers
Yup. Getting Tyre Power North Melbourne to do an alignment on Saturday.Quote:
Originally Posted by xenonkuraz
Then off to Vermont south. hopefully swing past yours if the stickers are ready
Fuarkkk dat cemberr werr
Yup. Lowered cars is a pain in the ass and drains your wallet aswell.Quote:
Originally Posted by Baygon
I think threesix had something like this not to long ago :-PQuote:
Originally Posted by Honda_FD
Anyone selling 8th Gen 16" Stock Wheels?
Looks like fat 5s on previous Hondas.
Or atleast know the value of these?
Without tyres.
http://www.pakwheels.com/forums/atta...0241994_00.jpg
100-150 no tyre imo
Oh okay. The DC5S 5 Spoke rims are 17" right?Quote:
Originally Posted by EKVTIR-T
I saw 3 ads and they're saying they are 16"...?
http://i.ebayimg.com/00/s/NjAwWDgwMA...fdw~~48_20.JPG
dc5s is 17"
Quote:
Originally Posted by EKVTIR-T
DC5S rims are the ones in the picture below right?
Yeah, and as EKVTIR-T said, 17x7+45Quote:
Originally Posted by Honda_FD
Strange... Asif people are trying to sell their wheels and not know what size it is...Quote:
Originally Posted by lolmclol
Or they just aren't into their cars :-PQuote:
Originally Posted by Honda_FD
Just for reference, these are DC5R wheels, they're 16x6.5+45
http://i564.photobucket.com/albums/s...6/DSC00858.jpg
fd with type S wheels for preference:
https://fbcdn-sphotos-a-a.akamaihd.n...65877372_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.n...70014763_n.jpg
Ohhh they look the same lol.Quote:
Originally Posted by lolmclol
Its not hard to read the size on the tyre and find out its 17"
Even my mum knows that.
What size tyre are you running? 215/45?Quote:
Originally Posted by jprak
Anyone selling DC5S Rims? Bored of my FD Sports wheels
yea im running 215/45 (Y)
Yeah they're very similar, DC5S has a squared look with dimpled straight spokes, DC5R has a rounded look with flat but angled spokes.Quote:
Originally Posted by Honda_FD
Get 4 stud conversion and slap on some fat 5s/blades
Win
Lol. Pay $500 + Install to put on $200 rim? Love the idea.Quote:
Originally Posted by xenonkuraz
Can you make a Brown Pedo Bear by Saturday?
ive tried putting on my friends dc5r wheels, it didnt clear the front brakes. You would have to grind/shave your brakes a bit for it to clear. As for the rear it was fine.
https://fbcdn-sphotos-b-a.akamaihd.n...22981130_n.jpg
Another question guys...is the 09+ facelifted FD front bumper same as the fd2r bumper? Or is the fd2r bumper slightly lower to the ground? Been trying to figure it out with photos but kinda hard.
thanks
its slimmer ... hard to explain, but it's differentQuote:
Originally Posted by starocean01
Different, fd2r requires mods to be fit on our fd1/fd2s, from memory you gotta mod your fenders and reinforcement bar. Unless you have the aftermarket fd2r bumper i believe..?Quote:
Originally Posted by starocean01
CorrectQuote:
Originally Posted by Baygon
Civic lost some weight last nite, stock drivers seat came in around 22kgs after removing. An old Cobra evo Fglass seat n rails comes in around 11.5kg. with both fronts removed Im looking at about 30kgs less.
http://madmick3006.com/ahngallery/up...9/abe393a9.jpg
Yeah They dont fit. My friend had to get 5mm spacers to run them wheels.Quote:
Originally Posted by kikimushroom
I thought you were selling your car?
@JPrak Where you at MCM Sydney meet? I saw quick second glance of an FD that had black fenders and silver wheels
(BirdsEye View)
@1:42
http://www.youtube.com/watch?v=-AaMGeWgAtI
Yellow plate/ Grade A on the windshield/ Two tone front end :-P
That's jprak hrhr
Quote:
Originally Posted by lolmclol
yosh! thats me!
@JPrak Where you at MCM Sydney meet? I saw quick second glance of an FD that had black fenders and silver wheels
(BirdsEye View)
hahah yea i was there, everyone was like that static ? ;D
Lol You should've told them yes and just drag your ass out then raise it around the corner hahaQuote:
Originally Posted by jprak
@Stevil That seat looks like it'll be a pain to climb in and out for daily usage
probably going to buy my bumper from bodykitskingdom..before I pay has anyone had experience with them? How was their products quality/fitment?
OHHH WHAATTT I swear some of those photos weren't there when I looked at them earlier....the ones with tape in specific
thanks
Are you buying the complete kit or just one piece?Quote:
Originally Posted by starocean01
If you are getting the whole kit why not buy from JDMyard?
Closer meaning less for postage and handling
http://www.jdmyard.com/index.php?rou...product_id=667
Posted this in his other thread.Quote:
Originally Posted by Honda_FD
Bodykitskingdom is located in QLD, so depends on where he lives?
Really? The link was from .co.ukQuote:
Originally Posted by lolmclol
My Bad!
All good, their .com.au domain redirects to the .co.uk, it confused me the first time I saw it a few years agoQuote:
Originally Posted by Honda_FD
Quote:
Originally Posted by Honda_FD
Initially I wanted to get it from jdmyard as its only about a 30min drive but I called them today and they have nothing in stock except for the mugen rr kit but I only need the front bumper and they don't sell it separately.
Got quoted $450+postage from bodykitskingdom =S what do u think of the price?
If anyone knows/finds a place to get the front bumper type r or mugen rr in nsw lmk please!
Thanks for the replies guys.
Depending on how much postage sets you back try this one.Quote:
Originally Posted by starocean01
http://www.ebay.com.au/itm/Honda-Civ...item1e73a2e1f8
Even with the replica fd2r front bar, still gotta shave off a bit of the front impact bar for it to fit.Quote:
Originally Posted by Baygon
hi guys, DC5R brembo can be fitted on civic FD1? any mods to do?
Depending where you order it from, I've seen one fitted without any issues. Heard from one other person in a different state who also had no issues, might be worth editing your post :-).Quote:
Originally Posted by Harricade
http://redliners.ca/forums/showthrea...hing-included!Quote:
Originally Posted by iou
You must spread some Reputation around before giving it to lolmclol again.Quote:
Originally Posted by lolmclol
want brembos on my r18, cause.
Guys link me to the best RSB available for our car. Looking to spend around $250
http://www.kingmotorsports.com/p-395...-sway-bar.aspxQuote:
Originally Posted by xenonkuraz
I have a Cusco 23mm one i got from EGB, no bodyroll whatsoever.
Would you suggest getting end links too?
Its suggested you should; you would wanna get the most out of your sway bar, and secondly you stock ones might not handle the new one.Quote:
Originally Posted by xenonkuraz
I would definitely get the end links as well, just for peace of mind, even reinforcing the brackets just to make sure nothing can go wrong.
Which ones are good? Suspension noob here.
DIY: Rear Sway Bar Reinforcement BracketsQuote:
Originally Posted by xenonkuraz
http://www.8thcivic.com/forums/diy-h...ure-heavy.html
Also bear in mind you gotta get the right size bushings and brackets depending on the size of your sway bar. If youre just buying the swaybar itself you gotta source those out.
hey guys. anyone know where i might get my civic fd1 2007 some mod parts, i.e. SRI, swaybars etc. ? sorry. am really new around here. just got my first car. thanks a bunch! Forgot to mention im in QLD
Ozzy tires have everything you need.
Only buy from places that have JDM in their business name, to ensure only competitive prices and high quality JDM products, e.g. JDM Concept or JDM YardQuote:
Originally Posted by Johntohjf
AFAIK, theres no JDM concept or yard in brisbane.Quote:
Originally Posted by lolmclol