Im not racing? Just want more straight line power for now..Quote:
Originally Posted by marquee
Printable View
Im not racing? Just want more straight line power for now..Quote:
Originally Posted by marquee
For power would be CAT/CAI/Headers/ECU(may provide some headache)/SC. Just don't expect the world.
Your right, cant expect too much from a NA. Im happy thus far.Quote:
Originally Posted by ChaosMaster
Ive already done all those you mention.
Now im thinking maybe bigger throttle body may we woth my time or maybe pulleys what ever they are might be the go ?
Pretty open to suggestions...
After all my lil mods ill get final touch up tune and that will be that
Not much can unless you want to do internals.
Nah, don't do pulleys.
Go for a bigger TB and change to a RBC might be what your looking for and some tuning for sure.
IMO Stock suspension and handling is quite fun hahah after tracking my car... but yes it's not ideal and you should upgrade your supension / handling in the future but not most important.
RBC? Please Elaborate...
Ive lowered my car and am happy with handling...That will do for now
Intake manifolds, see below.Quote:
Originally Posted by adis
Bigger TB dont do jack without cams and new Manifold.Quote:
Originally Posted by MingZai
http://www.hondata.com/tuning_k24a2_tsx_engine.html
But then with RBC you loose torque... kind of a tradeoff. The IM to lookout for is NOT RBB or RBC, it's the RRC used on the FD2R. it still loose some torque compared to the RBB, but nothing compared to the torque you'd lose switching form RBB to RBC, and RRC gains a heck of a lot power.
Pulley is the next best bang for your buck mod... remember the K is internally balanced so if you get a good quality pully it wont break anything.
Next is intake manifold heat gasket shield and TB heatshield thingy, if you are doing that I'd suggest you use groundwires the TB and engine block, because the DBW motor and engine sensors gounds off the engine block and intake manifold, I found that out when installing the Icebox. The heatshields will cut the ground.
Some good info there..., pulley, where is the best place to look for it and what brand as im not familiar with them at all.
Go to TSXclub or acura forums and search for "lightened Pulley"Quote:
Originally Posted by adis
should be some info there.
Quick update... I might be getting the Hondata Reflash sometime soon... so I decided to do the testing for OZHONDA's sake :p
what testing ? I was using Hondata reflash 3 years ago :D After that K-Pro and now happy owner of FlashPro ;)Quote:
Originally Posted by MingZai
Testing for A.U.D.M. CL9.Quote:
Originally Posted by vaikis
You know, people who drive on the correct side of the road as opposed to continental Europe :-p