Printable View
i think you should walk into an exhaust shop and get them to mandrel bend you a custom one. Will cost you maybe 1.5hrs shop time.Quote:
Originally Posted by Harricade
and as long as you keep the load rating the same or greater you have nothing to worry about
Quote:
Originally Posted by stevo1210
really?
i have a few sets here.
LOL
LOL
@Harricade I dont see why it wouldnt it. It wont be a direct bolt on but with a little bit of mucking around
you might be able to pull it off. I have K&N Typhoon kit which was designed for the USDM Si Civics and I got that to fit.
Take a gamble and do it :)
http://images.firesport.com.au//data...2014031639.jpg
@DAN
As if 235 doesnt fit? What profile did you get?
45 profile, they already came with the rims. picking up a set of 215's tonight and gonna get them fitted on the rims on thursday while i pick up my wheelnuts at Tyrepower. Gonna try clean the wheels before hand and maybe polish the facesQuote:
Originally Posted by Honda_FD
all while doing an essay, also due thursday LOL
Ohh nice! What wheelnuts did you get?Quote:
Originally Posted by *DAN*
What time you going on thursday? I might come same time as you.
I didnt get my wheel alignment yet lol.
Going OTR soon to get my mugen lip.
Settled on the Tegiwa open ended wheelnuts in silver since they were on specialQuote:
Originally Posted by Honda_FD
Not sure one what time ill be going on thursday yet, probably in the morning. Ill msg you on fb when i figure out a time! gotta get a friend to carry my tyres since i cant fit everything LOL
Going more functional instead of returning back to stock or something?
I want an sti lip
Cars still low. Back wheels are still tucked Just need an alignment since i touched the suspension and it therows my toe out.Quote:
Originally Posted by *DAN*
Those tegiwas arent all that good though. They're not that strong. you have to constantly check them cause they can come loose.
Me too bro. Might jsut buy one off ebay for $130Quote:
Originally Posted by NeedVtec
fair enough, keen to see the car if we end up going the same time on thursdayQuote:
Originally Posted by Honda_FD
yeah i know haha, they were only $75 though so i can make most of the money back when i order in a set of project kics in since theyre out of stock atm
Turbo kit installed!!! Enjoy guysss
http://youtu.be/dQw4w9WgXcQ
@DAN
I have blue tegiwa ones you can borrow if you want.
That way you can put that $75 towards your project kic nuts.
just return them when you get your new ones. I dont use them anyways
Great april's fool roflQuote:
Originally Posted by Honda_FD
In all seriousness, I have a fd1 and I'm talking to my mechanic in Brisbane about getting a turbocharger. He's liaising with a couple of turbo and supercharger suppliers, namely zage, ajp, jackson and possibly tsi. Keeping my fingers crossed.
Quote:
Originally Posted by Honda_FD
Haha nah should be fine, money's not an issue it's just the wait LOL, that and I don't trust myself with borrowing other people's stuff haha, get so paranoid. Thanks for the offer though
Quote:
Originally Posted by Johntjf
Niceee! Cant wait to see.
Lol All good. Always happy to help a fellow honda lover.Quote:
Originally Posted by *DAN*
i got them for free off Mark anyways. They're scratched a lot so i dont mind if you do any more damage to them. They just sit in my garage collecting dust. Just got back from OTR with the mugen lip. Just gunna put it on without painting it... for now..
I'll bring them on thursday if we do meet and you can decide whether you wanna borrow them or not. I want to get Blue Rays nuts aswell but broke atm :(
facebook me your number.
Got a the mugen lip yesterday. Not bad...
Needs something on the side and rear. Looking for a Modulo side and rear..
http://i194.photobucket.com/albums/z...48718117_o.jpg
looks awesome
Sex on wheels
Wheels on sex
The love machine
Love shack
Oots
Lolmclol's love-mo-bile
Lol Dafaq is you talkin about m8Quote:
Originally Posted by jprak
Talkin bout ya car mate
Sexy machine
nice, what your wheel specs?Quote:
Originally Posted by Honda_FD
17x8.5+30Quote:
Originally Posted by iou
17x9.5+38
Fronts are perfect, Flush with a bit of poke. Back Has poke but would be nicer if i had lower offset
Been testing rims in the last 24 hrs and I'm thinking of going upto 17x9.5 all round with 255s upfront and 235s in the rear, 265s are also on the short list for the front. B-)
nice Honda_FD !
In my opinion, I'd go with the mugen/mugen RR side skirts and rear lip, it'll blend in better and set the car off perfectly, the thing with the modulo lips is that they curve out, which I couldn't see it blending in with the front lip particularly well.Quote:
Originally Posted by Honda_FD
<3Quote:
Originally Posted by jprak
much love for the civic crew in here
What you guys think of...
http://www.jdmconcept.com.au/part/ssr/gtv-01
phantom silver. 17x7 +42 , closest to stock.
It's ok
Not a fan of it
If going some track look SSR type C
Or stance
Bbs
Meisters
Professor
If buying new try and get the rift offset cause if you buy a higher and your not happy with it then it would be a waste of money
I Lub yew lolmclol
I reckon they look really nice.Quote:
Originally Posted by SharkChu
I think my mate has those on his S15...or something really similar to that.
Got my varex muffler installed today.. i must say it sounds the same as my stocks when open hahah wtfff....
As mentioned before by honda_fd you gotta get your resonator removed, I took his advice and there was a massive difference in sound.Quote:
Originally Posted by darktmt
^^^ Yup yup. I took out my last resonator... Loud as ****. Its awesome!Quote:
Originally Posted by NeedVtec
I tried recording it but its too loud and my phone doesnt pick up all the noise. Sounds a bit fuzzy
Selling for a mate
UP FOR GRABS IS A HKS MUFFLER AND STRAIGHT PIPE FOR FD2 CIVIC! MUFFLER WILL BOLT STRAIGHT ON WITH FD1 TOO!
LOCATION VIC
PRICE: 350ono
https://scontent-a-lax.xx.fbcdn.net/...46414078_n.jpg
Hey guys just wondering if any of yous have a front sway bar on your FD and if so how much of a difference it is on the handling?
why would you install a front one? Do you like understeer?
You only need to upgrade rears?Quote:
Originally Posted by curtis265
Lol I've been looking into getting front and rears...
@jPrak
Do it!
http://www.gumtree.com.au/s-ad/earlw...otive&mpch=ads
StockQuote:
Originally Posted by Honda_FD
FSB: 24mm (hollow I believe)
RSB: 11mm (hollow)
Aftermarket
FSB: Ultra-racing 25mm (think it's hollow as well) or. Whiteline 27mm .... so not much of a difference from stock
RSB: UR has 16mm/19mm solid bar, can go upto like 26mm (whiteline) from memory.
So I think what curtis is saying, RSB is the one you get the most benefit from. A FSB is more of a luxury.
And from experience, I got the UR RSB 19mm, and the difference was light and day.
Hope this helps someone.
Honda_Fd
Why my lip fits on facelift XD
Cool guess I should just get a rear one instead. Thanks guys !
Hey xenonkuraz, think I spotted your FD on the princes hwy last night. Not sure if you saw me, I was turning onto Springvale rd with the group of Hondas haha
RUDEEEE!! Where was my invite?!Quote:
Originally Posted by *DAN*
Lol jokes.. Did you put the wheels on? If so, Pictures?
But ... Type R Thoughh ...Quote:
Originally Posted by jprak
Dan you were the 9th gen last night? Haha I was inter black fd2
Honda_fd
I know but I already molded the lip to the facelift and to cut parts off <.<
I'll prob buy later on anyways
Melbourne needs a FD meet or an FD club!
Sounds good, I'm in. Organise that shit
make one on facebookQuote:
Originally Posted by Honda_FD
Quote:
Originally Posted by NeedVtec
Lol Dont know many FD owners in Melbourne. Need help spreading the word!Quote:
Originally Posted by integraR
I know a few owners but they have sold their fd or in a process sellingQuote:
Originally Posted by Honda_FD
Ohhh? Thats generally what happens when kids get off their PsQuote:
Originally Posted by integraR
Im trying to save up for another car aswell. Trying to restrain myself from buying parts for my Civic
But really. If you guys are really keen on an FD meet.
We can try to organize one? Even if its only a few FDs im keen to see whats around Melbourne
We can go somewhere, Some Carwash or even GargeCafe.
This was the previous Garage Cafe Meet.
https://fbcdn-sphotos-a-a.akamaihd.n...49191854_n.jpg
https://www.youtube.com/watch?v=7qzqD38yXm0Quote:
Originally Posted by Honda_FD
LOLOLOLLLLQuote:
Originally Posted by jprak
That made me laugh in real life!
cute ;)
Quote:
Originally Posted by Honda_FD
Come next time!! There's always a post on the Honda club FB page about it
Oh hey dude! Had no idea you were on here as well lolQuote:
Originally Posted by NeedVtec
Michael Mate. Gets some wheels! Adds more #YOLO$WAG Points.
Forgot to ask last time. How are the springs? everything all good?
Pictures please..
Honda_FD: which website you use to upload photos? I used to use "imageshack" but now they asked me to pay money to upgrade my account, not free anymore :-)
PhotobucketQuote:
Originally Posted by iou
thanksQuote:
Originally Posted by Honda_FD
is waiting for this one :):)
http://i90.photobucket.com/albums/k2...ps1be2f8bb.jpg
Really?! Tell me how it goes!Quote:
Originally Posted by iou
I really want to get one aswell. Do you know anyone in Melbourne that can get one?
It's me, i can get it for you if you want :-)Quote:
Originally Posted by Honda_FD
Check this one and pm me which one you like. I can get cheaper than their prices
http://www.jdmconcept.com.au/part/pi...ivic-fd2-06-11
Nicee! Pricing for both? Mates rate please ;)Quote:
Originally Posted by iou
http://i745.photobucket.com/albums/x...ps640bc94b.jpg
everyone should post a recent pic of their FD. or not lol :cool:
@threesix Did you lower it? Looks different lol
Are we doing ass shots?
http://i194.photobucket.com/albums/z...86177172_o.jpg
http://img.tapatalk.com/d/14/04/08/e4ytyga7.jpg
Only good foto of my arse oo yaa
y u no airout?!Quote:
Originally Posted by jprak
bum shots ftw.
nah _FD its always been this height.
air oooooooouuuuuuuuuuutttt
are they dents on the side jprak??? :(
No air out cause driving brah!
Yeah it's dents<.< previous owner
Get facelift rear lights Mr. Prak!Quote:
Originally Posted by jprak
And tint them like mine! You can be Sydneys version of me haha
http://i194.photobucket.com/albums/z...20371067_n.jpg
Get one facelift and keep one regular, for extra swag jprak ;-)
Two-tone lights
YESSS!!Quote:
Originally Posted by lolmclol
:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup:
pre-facelift ftw imo.
jprak - doesnt the dent piss you off??!??
I do like pre facelight tail lights ...
I have hail damage on mine. A tear drops from my eye when i walk past andQuote:
Originally Posted by threesix
see the dents off the suns reflection
FD meet would be awesome :)
Count me in.
Quote:
Originally Posted by lolmclol
yea i like the preface lights more then the facelift :DQuote:
Originally Posted by threesix
yea it has pissed me off these yrs now..but just so lazy in fixing it LOL! no dosh! could spend it else where
i already got them swag points for the 3 tone panel car
Replace the passenger door with a red one ;-)Quote:
Originally Posted by jprak
You need to be the first 5-tone FD ;D
expensive brah! rather hammer it out cause im dent heroQuote:
Originally Posted by lolmclol
Are they big dents?Quote:
Originally Posted by jprak
Take your door apart. Heat the paint a little and flykick the dents out from the inside
Never done it before. If you make it worse not my fault :)
both 50c sizeQuote:
Originally Posted by Honda_FD
friend recommended me to just bog it up. cause paintles wont get 100%
Now I know why you've got too much swag ....Quote:
Originally Posted by jprak
http://www.youtube.com/watch?v=otCpCn0l4Wo
oh you =$Quote:
Originally Posted by lolmclol
hab mi babiz
It would drive me crazy. No excuse for dents. Fix dents. Dents.
Bought some Army Camo Vinyl Wrap today.
Planning on wrapping the plastic trim on all 4 doors. Drivers door trims are scratched.
Heavy rain all week so got to wait till weekend to do it. Cold as at the moment.
http://www.autotecnica.com.au/army-urban-sticker-bomb
Anyone know if the plastic trims on the doors pop off? Or will I need to take the whole door
trim off and unscrew the plastics. Talking about the plastic thingy-ma-bob that holds the window buttons