not sure if srs.Quote:
Originally Posted by jprak
Printable View
not sure if srs.Quote:
Originally Posted by jprak
Quote:
Originally Posted by stevo1210
Quote:
Originally Posted by Honda_FD
Quote:
Originally Posted by SharkChu
AHAHAHHA only half right...mum just ordered the new 2014 honda city.....to be honest...i actually like it
http://www.gettinlow.com/wp-content/...y-putih-07.jpg
We were supposed to get one instead of the FD.Quote:
Originally Posted by jprak
Wouldnt mind either.
Tanabe muffler sold
i couldn't rock a city
something about micro sized sedans just look awkard
Should have told your mum to wait and get the Civic Hatch turbo haha
yeah i'm with you there.Quote:
Originally Posted by curtis265
I saw a new City with what I assumed was a Modulo kit at my local Honda and it looked like all sorts of strange - reminded me of an outdoor TV antenna.
Quote:
Originally Posted by nedkerry
Quote:
Originally Posted by Honda_FD
Quote:
Originally Posted by curtis265
ahahahah guys...trust me if it was me..would of picked a civic sedan 9th gen...but for its price not worth it.
im waiting later on when someone wrecks their modulo honda city so i can take the kit off it ;)
http://geartinggi.com/wp-content/upl...lo-2014.08.jpg
http://www.motortrader.com.my/news/w...lo-version.jpg
will go wingless on her car ;D
roof wing arrived :)
http://i.imgur.com/eqj33U6.jpg
Nice tissue boxQuote:
Originally Posted by jprak
anyone have a boot lip they would sell cheap?
@Honda_FD didn't you have one a while back?
I do but still contemplating whether to get it painted and glued on.Quote:
Originally Posted by chrischris
Nice roof spoiler. Did you glue it on? Im thinking of gluing mine on but not sure if it can be removed afterwards?
I tried double sided tape but wouldnt stay on
All this wing talk got me a bit excited, So lasted nite my fd got some carbon fibre love, more function over form, will post pics later.
it came pre lined with 3m tape and a prep liquid. I gave it a wash with alcohol wipes, then the prep stuff. Seems to stay on quite strong.
How much would you sell it for? Or maybe swap for modulo spoiler? I'm still undecided if i should leave it how it is, thats why id want a cheap boot lip to try it out. I already got a can of alabaster silver to colour match the grille i got from @nedkerry
Quote:
Originally Posted by Stevil
carbon boot?
carbon bonnet?
carbon front end?!
damn what a teaser... ;)
Just installed a k&n typhoon, low end took some damage but mid-high feels like I gained a pony or 2. Bloody loud now too.
Install was straight forward, only headache was trying to position it so everything lined up.
If I were to sell it. I'd probably let it go for about $120. Only because the mounting points have be broken off.Quote:
Originally Posted by chrischris
So the spoiler will need to be glued down instead of screwed into the boot lid. Nothing major.
Light scratch in the middle because the boot was up at the wrecker and idiots scratched it.
Will sand out. Which is okay because you will be painting it anyways
LOLQuote:
Originally Posted by chrischris
OEM is bigger than those...i had that on my car..it was ok but didnt stick well under the heat of the sun
any pictures?Quote:
Originally Posted by jprak
looked good, i wish there was one available that was more pronouncedQuote:
Originally Posted by jprak
similar to this but a little less out there
http://www.speedhunters.com/wp-conte...ay-2013-10.jpg
or this
http://blog.modbargains.com/wp-conte...-spoiler-9.jpg
@Chris
Those ebay spoilers dont look as good as the oem in my opinion.
They're really skinny. Looks weird.
The spoilers you want. Modulo in America has them. They're called Modulo Type R
http://i672.photobucket.com/albums/v...7035402440.jpg
http://www.blogcdn.com/www.autoblog....o_civic-15.jpg
http://i672.photobucket.com/albums/v...582646_508.jpg
And the towbar will get pulled off on friday so its a wee bit quicker on the track next monday, runnng 6 deg of camber in the rear now and 4 deg in the front, torque steer is loads of fun ! NOT and new 245/40/17 rubber gets debuted on Monday, could probably run 255's up front but Id rather not with only 8.5 rims, really need some 9.5 s lol.
http://madmick3006.com/ahngallery/up...5/4a83c752.jpg
http://madmick3006.com/ahngallery/up...5/4d8fb7d9.jpg
My one look like this :-)http://img.tapatalk.com/d/14/05/20/ura4ahun.jpg
Should I.....?
https://scontent-b-lax.xx.fbcdn.net/...22772060_o.jpg
Not sure if serious
Yeah man ahead of the curve !! I reckon those rims will be all the rage in 5 or 6 years LOL
iou yeah its effin huge, I'd been thinkin about a Wing for quite a while as I've almost run out of things to upgrade that would make the car quicker at the track, really only have shit like spherical bearings, front splitter and better positioning of the air intake to go. As I get a car allowance for the car and leases costs are down to $270/mth theres a little bit of play money every month for silly purchases like this wing, which by the way is 4 years old, at 100kmh it feels like there is 2 chicks in the boot.
and Im on the lookout for a white FD boot as I dont want to daily the wing, so if anybody knows of a front ended white 1 lt me know. here another angle for ya
http://madmick3006.com/ahngallery/up...5/82ba1050.jpg
Yep, it's quite big for a daily driving car. It will look more perfect if you have bodykit on. You're gonna track your car so what will be your next upgrade? Sway bars, brake kit, coilover......???
Invest in a bodykit!Quote:
Originally Posted by Stevil
It'll look tough as with a full mugen RR or full Type R + Js Racing lip!
Get a carbon boot and Carbon Mugen Hood aswell!
You're the only here going full functional. Show us Carpark Whores how its done!
http://image.hondatuningmagazine.com...ear-bumper.jpg
Shit don't go putting pic's up like that !!
i think they look alright, maybe do a photoshop mockup. Are they good specs atleast? real 3 piece ?Quote:
Originally Posted by Honda_FD
They're Genuine Carving Tisters.Quote:
Originally Posted by chrischris
18x8+35 all round. Specs arent wide but for $640. Not bad lol
Lol Whyyy? Its sexy as helllllQuote:
Originally Posted by Stevil
it's so you can see past itQuote:
Originally Posted by iou
people have thought these things through
:-)))))))Quote:
Originally Posted by curtis265
Anyone know what the front lip is called? STI lip maybe?
http://ladyonwheels.com/wp-content/u...agib-FD1-2.jpg
source
Correct. Its a 2007 V-Limited STI Lip.Quote:
Originally Posted by chrischris
I was originally going to put it on my car but I couldnt find one. Now they have heaps on ebay lol.
Not sure if it will suit your bumper though.
Might take my lip off and get an STI lip though. The mugen lip is so big and bulgy.
Trying to make the car more OEM+ look
http://www.ontherunmotorsports.com/i...rior&Itemid=71
OTR do them. Kinda tempted, actually.
that STI lip is imo the best looking add on to our fronts. love love love them.
and get those rims for sure honda_FD. 10/10
yeah it might not suit my pre face lift :(Quote:
Originally Posted by Honda_FD
I really like the mugen bumper but im afraid i might get pulled up for it as it quite lower than 100mm
and being on springs would cost to much to clear defect as exhaust is lower than 100mm too, without the lip the car doesnt look that low, i went through two booze bus stops with hwy patrol cars there and they said nothing about wheels or ride height
how it looks no until i get the lip colour and grille colour matched
http://i.imgur.com/1oQdOuq.jpg
trial on my old grille colour matched and missing the H badge (wifes car in the back)
http://i.imgur.com/rkoff2M.png
Is that CF V-Lip the same as the STI ones?Quote:
Originally Posted by nedkerry
Not sure about CF as my car is low lol. One bump and that lip will crack and break off.
Thats why I like plastic lips. Only cracks, Doesnt shatter
Quote:
Originally Posted by Honda_FD
V-lip for mugen 06-08 lip...it extends the mugen lip. friend damage his lip and bumper....
guys...got a surprise...
;)
So it wont fit on my facelift front?Quote:
Originally Posted by jprak
WHATS THE SURPRISE?!?!?!
AS IF STOP HALFWAY! WHAT A TEASE!
nah...just get a sti lip its universal...
cant get pics atm...too dark <.<
Lol Can we get a hint?Quote:
Originally Posted by jprak
exterior... that is all
Lol What a tease!Quote:
Originally Posted by jprak
I'll be expecting a post from you early tomorrow morning!
Different colour rear bumper! (-;
the wheels on your wife's Swift look nice :)Quote:
Originally Posted by chrischris
leaving me hanging...you're just as bad as my girlfriendQuote:
Originally Posted by jprak
Quote:
Originally Posted by jprak
http://data3.whicdn.com/images/7523206/large.jpg
CF?! What happened to the other one?
@lolmclol
You were right lol. He does have a different coloured rear bar
Anyone in VIC wanna buy my Mugen front lip? Only had it for little over a month
Has all original bolts and brackets thats never been used.
Slight crack on the bottom of the lip.
Yeah, found them cheap. They dont look too great stock though
http://www.tyrepitstop.com.au/site/D...SC22-large.png
So like... 3 tone car now. :PQuote:
Originally Posted by jprak
OEM Modulo face lift front lip. :PQuote:
Originally Posted by Honda_FD
It actually looks good for OEM, that's not cause I have one... but yeah. Found Mugen to be a bit too bulky.
https://fbcdn-sphotos-g-a.akamaihd.n...90840860_n.jpg
teehee.
Was gonna get new wheels at one stage... but only got one job ATM (plus another on and off job) and bracing myself for the upcoming Tony Abbott budget. Unless someone finds me a 3rd income, then grey baby will be cool again. LOL.
Quote:
Originally Posted by Honda_FD
lolmclol knows me well <3
ahahah carbon? its hydro dripped man :D
@jprak damn how much did that cost you? to hydro dip?
ahahah sorry man was kidding. its actual carbonQuote:
Originally Posted by darktmt
but i would estimate around 200-300...
What happened to your fiberglass one?
I'll take it :)
Someone buy my mugen lip! Need the money for new part :)
oooQuote:
Originally Posted by jprak
how much it cost to get that sorta thing done?
Hydro dip varies on how big the item is.
If your in NSW Facebook just dip it hydrographic and get a quote
He's got a bigger machine coming in for bigger stuff so yeah.
Btw guys EOI my fd2r Js racing 60Rs titanium ver. Let me know if keen
Hrhrhrhr <3Quote:
Originally Posted by jprak
So guyz...
Battery is dead (on my keys!!) and need to replace it. What's the battery size model? CR1616 right???
Can these be bought anywhere???
Ps. Jprak ������������������������������
any mr minnutQuote:
Originally Posted by threesix
Chemists also sell themQuote:
Originally Posted by threesix
Jackpot!! Flanks guys.
My plastic key case cracked a while ago and I superglued it up... So I gotta break it open. Just got 2 new cases off eBay for 10 bones.
All up a cheap fix. Honda probably would have charged 80 bucks or something : /
$80 for the battery alone ;-)
threesix...you called?
I put lots of emoticons that were thumbs ups, happy faces, and so on regarding your new stuff.
All though I still think you should piss the crooked yellow number plate off. But hey... It's your world and I'm just living in it. ;)
Should I?
Not sure if it will look good on my car.
http://www.ultrex.com.au/images/char...20lip%2001.jpg
Upgraded stock horn with the Accord horn =D
Lol! Don't have the bolts for it lol. I'll be getting custom plates anyways:)
Do it bao!
Most likely will. Dont really like the Mugen lip I have now :(Quote:
Originally Posted by jprak
Want to get rid of it.
Really I like them both :)
I dont like the facelift Mugen lip. Too bulgy. Im trying to go for a OEM+ clean look.
Suspension blew guys
borrowed my friends SSRs too wide and rubbed on the airline.
Slight chance airbag popped as well
@jprak LATERS! i feel for you man.. stay strong haha
Farrrkkkk Shattered as Bro!Quote:
Originally Posted by jprak
RIP JPraks Wallet!
airline just damaged..luckily got spares (Y)Quote:
Originally Posted by Honda_FD
working on it today later on