the wheels on Chriskoss's avatar are sportsmax, 16x8, 0 off-set i believe
ive got them in 15s, no chance im gon get them on without body work
Printable View
the wheels on Chriskoss's avatar are sportsmax, 16x8, 0 off-set i believe
ive got them in 15s, no chance im gon get them on without body work
the da in ur avatar is prob the most popular da in the world
lol agree..
aman...what r u doing up at 1.12am!
man..i dont know what to do with my car anymore..should i return it to stock and keep it as a daily?...kinda tired of it all...
his from WA man time diffrence lolQuote:
Originally Posted by Spoon DA9R
haha sht..forgotten about that
Either keep it or accept the loss and sell it for peanuts. I'm starting to wish I didn't sell mine.
keep it. da9's arent for profit.. theyre a sweet classic car.. I like your da9 spoon, either keep it or give me some of your nice parts :D
yeh i agree look at the cash i threw at mine
yeh..well i was thinkin maybe i should sell it before i throw more in...haha...but then i know i should part to sell..but i just so cbf...sigh...well..gonna work on it a little this weekend...see how i feel after..haha
lol yeah i was talkin bout your avatar pic. lol
ive got a b series turbo kit if anyones interested... too broke to put it in :(
yeh theyre sportmaxs.. most likely 0 offset and 15x10 hahaQuote:
Originally Posted by rage_against
do you guys know if the dc centre console will fit in the da?
i have a standard engine and gearbox that i would like to get rid off, would have just over 100,000kms on it, the gearbox about 250,000kms
pm me if youre interested
also, if i have a b16a in my da will something like an aem cai still fit properly?
does anyone know part number for ignition coil for 89-91 DA9?
yes it willQuote:
Originally Posted by rage_against
not if you have the DA dashQuote:
Originally Posted by rage_against
thanks man
I got a question that might sound really noob, but I just wanna be sure. I've got lowered springs, only about a 1.8" drop, if I was to buy sport shocks to go with it, does it make a difference if I buy any set or do I have to find ones specifically for lowering? cause there is a set of skunk2 DA9 shocks on Ebay I've had my eye on for a while, but it doesn't say anything about lowering.
Hi,i was looking for the same thing.
http://www.jhpusa.com/store/pc/viewP...idcategory=254
These are the cheapest i have found (for lowered car too)
I emailed them and he says $128 postage to Perth
arent there full coilovers that you can get for the Da9's??
http://i108.photobucket.com/albums/n...00411-1534.jpg
http://i108.photobucket.com/albums/n...00411-1534.jpg
ive helped my mate out ive sold him a bolt kit. it does all his bumpers etc. as you can see. i have also done my da. majority of the bolts on the da are now marine grade stainless and it looks quite smick. i can make kits for any car. if anyone is interested ill get the pictures soon of the da. kits range from $15 to $50
id be down.
yes there are, but i don't trust the ones on ebay cause they're brands i've never heard of. (on ebay australia anyway) and to get ones from america or a better brand here is too expensive. :(
ive helped my mate out ive sold him a bolt kit. it does all his bumpers etc. as you can see. i have also done my da. majority of the bolts on the da are now marine grade stainless and it looks quite smick. i can make kits for any car. if anyone is interested ill get the pictures soon of the da. kits range from $15 to $50[/QUOTE]
Im def interested man im in the process of myakin my engine bay look pretty
if u guys r all in melbourne i got 2 more kits i might get a trusted member to hold like 4 kits and then have a local pickup? if thats the case ill start making kits up now
what brands are available for the Da9's?Quote:
Originally Posted by Super-DA9
ive found Skunk2, and Ksports so far.
Do Tein, D2 or any othr major brands make coilovers for our cars?
I AM IN! haha...if i dont sell
pretty sure Tein make them in america, Eibach does last I checked, I got my springs from Eibach, they're heaps good. other than those and the ones you mentioned thats all i know :(
ok i got 2 kits for da9s?
1 kit for dc2
anyone else?
yeah i am interested...clear ur pm inbox!
im in too
I have a shed full of parts for the DA9, including 2 x passenger doors, 2 x passenger side guards, bonnet, 1 x driver's side guard, front and rear bumpers, front lip, taillights, bumper indicators, rear centrepiece valance (where the keyhole is), plus heaps of other stuff. Might also have interior trim like complete dashboard, cluster, heater controls, etc plus brake pads with near new padding. Also lowering springs and shocks, calipers, etc
Let me know if you need anything.
Peter
its empty
anyone in melbourne have stock rims i could buy with tred, need them asap like today or tomoz, please call me on 0422 105 381, need them asap
ohh! what lip is it? OEM ltd edition, OEM standard, aftermarket? and what brand of lowered of shocks?Quote:
Originally Posted by jdm_b16a
Hey guys....long time no see. I've got a DA suspension question.
What I *think* I know so far (pls correct me if I'm wrong):
Springs:
- interchangeable with EG Civics and DC2 Integras (and EK???)
Front shocks:
- interchangeable with EG/DC2 Integras, front forks needed.
- directly interchangeable with EF Civic
Rear shocks:
- directly interchangeable with EF/EG/DC2
1. Do the stock springs from a EG or DC2 change the DA9 ride height?
2. When installing the front shocks + forks from a DC2/EG, does this also affect ride height?
> Springs are interchangeable with eg and dc NOT ek, tho height with vary depending on spring (eg springs will be lower)
> front shocks are interchangeable yes front forks are needed (i had dc2 shocks all round) same with ef tho ef shocks fit like a glove.
> rear shocks are also interchangeable with all 3, NOT DC2R or EG6
1. Yes they do eg will sit slieghtly lower/ dc2 will sit slieghtly higher
2. Yes it will, my fronts from a dc2 were higher then the rears :(
thanks mate - thats exactly what I needed to know. Looks like I must have some EG superlows on my car then....Koni's are on the highest perch and still having troubles with speed bumps...
looks like I need some new springs...
I've also got a boot leak....now looks like a kiddie swimming pool around my spare tyre. Its not a blockage in the drain tubes from the sunroof and boot seals are also fine. Anyone else had a similar problem?
Peter, how much for the back bumper?, and also do you have the right rear quarter panel? if so how much?Quote:
Originally Posted by jdm_b16a
iggie
Standard (that is, OEM) lip for the DA9.Quote:
Originally Posted by Super-DA9
I have two sets to choose from - Pedders and Lovells.
Let me know.
Peter
What is the right rear quarter panel? Can you describe or have photo of what you're looking for.Quote:
Originally Posted by iggie
Very competitive prices as I need this stuff gone.
Peter
Hey Peter.
Regarding your lip....
Oem series one or two?
I'm after series two.
Pm me a price if it is.
Thanks
Does anyone know the part number for the oem series two front lip also for the grommets that go under the wiper panel too.... How many do I need to buy too?
Cheers Will
1990 DA9Quote:
Originally Posted by Runt
You need 15 if you want to fill all the holes and they are just under $5 each, with a three week wait for them to come from Japan. I know this because I just enquired myself.Quote:
Originally Posted by Runt
Peter
Shame... Thanks for the info too.
Cheers.
not sure as in what part, refer to picQuote:
Originally Posted by jdm_b16a
I have a couple of those rear valance panels but if you mean the actual bodywork, then that's a cut and weld job, or a panel beater to pull it, and paint it.
Sorry to see you got a whack in the worst possible spot. Your bumper bar is broken too!
Peter
Mate,can you tell me where i can order them from?Quote:
Originally Posted by jdm_b16a
Ahh k it's all good thanks anyway mate ;)Quote:
Originally Posted by jdm_b16a
got some parts off my wreck im gonna sell. Simoto S pipe (CAI), clear indicators, Type R front lip, will let you know what else.
yes i know, backed into a tree during easter time at a park with the family, worst thing is the tree was in my blind spot :(Quote:
Originally Posted by jdm_b16a
i have a feeling its the actual bodywork, my mates brother is a panel beater might have him to have a look at it
iggie
Dibs on the lip. Will PM u
Sh*t i'll never get a lip at this rate! lol :P
are there any other front seats that would fit a DA? straight swap if possible?
H O N D A !!Quote:
Originally Posted by kosmo90
Peter
No, all Hondas are different in runner width, and rear leg alignment.Quote:
Originally Posted by iggie
Peter
depending on what area youre from, find your local honda dealerQuote:
Originally Posted by kosmo90
give the this part no. HO-91608SJ6003, order 15 of them
they cost $2.87 a piece
but i think i baught the last ones, lol
so you'll have to wait for them as they will have to come from japan
Ive seen BB4 prelude seats in a DA plenty of times... nice seats tooQuote:
Originally Posted by jdm_b16a
I THINK they bolt straight in
actually 3/4 bolts line up and the 4th needs to be drilled
here: http://www.g2ic.com/forums/showthrea...hlight=prelude
fr33k i just noticed your sig.
Were u the old owner of LSV73C ? the black one
yuuhhhh why ??
this one
http://img.photobucket.com/albums/v110/FR33K/teg4.jpg
thanks for that :) might invest in someQuote:
Originally Posted by FR33K
i use to see that thing in lidcombe everyday
damnn take a photo for me !! i miss it :)
damn..i miss that front lip..maybe i should get another one
when did u own it though?
i use to see it last year.. towards the end.. heaps like everyday.
i havent owned it for about 2 years now.. new owner is around here somewhere but dont think he comes on much
do you guys reckon this would fit the da? its nice and cheap thats all and i cant bring myself to spend 300-400 on an aem
http://cgi.ebay.com.au/COLD-AIR-INTA...item563ba098ab
Nah mate wont fit..
Go on US Ebay, I got a SRI kit with everything for around 100 posted here...
CAI kits are basically same price.. and the aussie dollar is buying a not too shabby 91-93 US cents, so go for it.
yeah i found those on the us ebay they didnt look to bad for the price, how did yours go was any good?
check the dacrew website guys
its gettin a long awaited revamp
looks mint
also the forum will b back up for u all to rejoin tmrw hopefully
[QUOTE=jeff_inauen;2724859]depending on what area youre from, find your local honda dealer
give the this part no. HO-91608SJ6003, order 15 of them
they cost $2.87 a piece
Now THAT was helpful,thanks mate
noice man looks sweetQuote:
Originally Posted by A-man
anyone know anything about air bags and integra's ..
What im after is pretty much.. when i lock the car.. i want the car to be slammed down on its ass lol on the floor.
But when im in the car obviously i can re-raise itlol.
I dont know shit about them.. i been quoted $3500 for the kit $4500 installed. Cheap? Expensive?
I'm after the cheapest system possible i dont care if its made in china.
Who can help me :) ?
beware though, airbags can be as good as coilovers/lowered suspension, but only if you pay a lot. if you buy a cheap set you may be sacrificing/compromising your handling. :(
what is the .. worst thing that could happen? shocks n shit brake.. big deal i just put my oldies back in :) or something worse can happen ?\
and well how much is a GOOD ONE? how muchis a SHIT one?
I have air suspension in my teg, i got a kit from Probag for $2500, I had to install it, it will effect your handling however to be able to drop the car on its guts there is no better way ;)Quote:
Originally Posted by slimx
looking good!!!
hey dude may i suggest we use a local DA?
mine's all dirty now..so not mine, maybe ask some of the guys to submit the best picture of THEIR car and pick one from it??? just an idea..or looking for an original one from Honda online..haha
i keep gettin the 404 not found for the dacrew site?