BLUE wiring under hood (electrical tape)

Good stuff :)
Looks A+

Quote:

---

Originally Posted by riruiz_88

if you used blue electrical tape, it should be rated to V90 standards. this means that it can handle up to 90degrees Celsius for a short amount of time before it starts to break down.
so really you shouldnt have a problem about melting tape where you have used it around the cables in your engine bay, unless you have used it around the exhaust area.

---

You do realise V90 is actually the rating for 75degrees?

wrong. maximum permissible is 90degrees, normal use is 75degrees.

Quote:

---

Originally Posted by riruiz_88

wrong. maximum permissible is 90degrees, normal use is 75degrees.

---

Well done :thumbsup:

That looks really good, and if you want to remove the sticky gunk from your wires afterward you could simply use some eucalyptus oil and it will come off with no stress at all. When I had duck tape and other gunk on my front windshield I used some of that with a cloth and it came out with no struggle at all.

thats good to know and i actually took one of the tapes off and there was no gunk or sticky residue :) pleased to say...

arent those hoses like $3 a metre? lol

bro! this is the most ghetto DIY EVA! it even diserves NEGATIVE rep!

WTF lol.. good idea though

but after a month also those glue will got heated up and melted and it wont stick any more and become ugly and sitcky lol because of the hea of the engine bay is just too hot for the glue..

hey ive had it on for over more that 5 months taken some off aswell... no sticky residue left on wires :)