Angel Eyes

MAsterPHO - thanks alot for taking the time / effort

the beam levels seem quite lopsided, maybe the passenger side beam is pointed down more?

Also - is there a wall you can drive up to ( facing it like 3m away to show the beam pattern on the wall?

Yeah will do that tonight. I know there seems to be a problem trying to lift the Angle on the passenger side. I'll will give it a go tonight see if it's better. Ill wait till night then I'll take a pic again. (with the wall this time lol)

lolye cutoff pic means against wall.

these aren't designed for RHD applications are they....?
this is perfect IMO. i wish we could do this here.
http://farm5.static.flickr.com/4024/...ec5f777282.jpg
http://farm3.static.flickr.com/2751/...77ca59c030.jpg

buy a pair of headlights from wreckers and you can DIY, if you have hours spare and patience of a saint - unfortunately not for me.

Would love a set of xenon projectors with a black surround for headlight. *creampants*

Hey guys these are the cut off with and without hids
Managed to fix the angle a bit. Just a reminder I have the Audi style projector headlights
Hope these help
http://i11.photobucket.com/albums/a1...n/2032951e.jpg
http://i11.photobucket.com/albums/a1...n/c27c6785.jpg

ooh not much sidespread :(

Yeah but yup be surprised how decent the visibility is :)

thats because inside of the projector theres the metal cutoff piece which gives the cutoff.

Halogen has a cutoff like this \____

whereas proper xenon (HID) has one like this ____


I am picking up a set of angel eye projector headlights tonight for cheap and I plan to modify the projector to have the cutoff like a proper xenon.. xD

So mine is not a proper xenon??? I'm confused now

Quote:

---

Quote:

---

I am picking up a set of angel eye projector headlights tonight for cheap and I plan to modify the projector to have the cutoff like a proper xenon.. xD

---

---

Picture!!!! Lol

will do when I have camera + pics.

okay I grabbed these headlights up for cheap 2nd hand, since the halos don't all fully illuminate, which is fine by my, the plan is to disconnect them and spray over them with matte black.

http://img146.imageshack.us/img146/7240/126jc.jpg

See the cutoff inside the projector? It's meant for halogens, and it will give that standard halogen headlight cutoff - like the cutoff's MasterPHO posted up

http://img709.imageshack.us/img709/403/130dw.jpg

A closer look at the cutoff.

http://img256.imageshack.us/img256/2230/127tc.jpg

hope that makes sense.

Factory xenon projectors are a flat cutoff. like below.

http://img831.imageshack.us/img831/6017/img0191xy.jpg

The plan is to convert the cutoff to flat, and disable / remove the rings. :)

I get it now! that would make the HID look better... hmmm how do i go about doing that though? would love to see a DIY. Thanks =]