wheels

i dont remember, but with a spoon cf lip it was about 2 - 3 fingers off the ground

Mm just doesn't add up? I've got a 6cm wheel gap. But the front lip is 19cm off the ground. So it's still gonna be sitting damn fkn high and can't go any lower than that with the 205/45

Quote:

---

Originally Posted by viinnh

what rims are nice to suit a black ek with something along
15x7 +30 to +35
15x7.5 +30 to +35
15x8 +30 to +35


maybe +35 with chunky tyres to fill the guards ? i dont want +25 axis, sportmax etc. with stretch tyres and dump to make it flush etc.

---

Quote:

---

Originally Posted by charliebrown

Bit late but enkei rpf1 15x7 +35. Can get brand new for $900-950

---

Quote:

---

Originally Posted by viinnh

nah too weak offset going on 7" inch wide

---

lulz had

Ended up tucking front wheels, -1 finger gap ish. Surprisingly there is no scrubbage with a 7" +40. On full lock the fender sits bout 5mm from the tyre tread but maybe it's just the coilovers are stiffer so theres no vertical wheel bounce. Guess i won't need the guards rolled/pulled or even remove the fender liner. Good offset! weak... but practical :D

got pics mate?

Yeah mate. It went a tiny bit lower than that after a short drive.

http://img6.imageshack.us/img6/1028/20111231182227.jpg

http://img267.imageshack.us/img267/2...1231195027.jpg

Looks hot but man.

very nice mate

spray your stockies black.
http://www.flickr.com/photos/73349005@N02/6624191809/

im lucky they were alloy. also they say enkei and honda on the back. which is pretty cool.

bout 50buks in paint and paper.

2 coats black.
1 coat clear

Quote:

---

Originally Posted by Hellomotog

spray your stockies black.

---

NNNOOOOOOOOooooooooooooooo!!!!!!