They're all on the front right side of the engine when you look at it from the front.
Do the water/lube trick.
Printable View
Okay did the water trick and noticed that if I spray at this certain part of the belt/pulley the noise stops for a few seconds and starts up again I took a photo for you guys to identify which belts they are, as I'm a bit unsure of which ones they are. here you go, there are two belts that join up to the same pulley so it could be one or the other.
http://i39.tinypic.com/dqhv7m.jpg
Also looked at the manual from what I can see i think its the alternator belt and p/s belt? still unsure
http://i43.tinypic.com/24bj6tz.png
all 3 drive belts go off the crank pulley. but id do as bludger said and take it to a mechanic, could be something as simple as one of the belts is a bit to loose or a bit to tight.