Accord Euro Electrical Schematic

Moar photos!

Dash removal...
https://lh5.googleusercontent.com/-K...419_175325.jpg

Vehicle ECM (CAN-H, CAN-L and VSS signals)...
https://lh4.googleusercontent.com/-6...420_110010.jpg

Trial fit up...
https://lh6.googleusercontent.com/-t...420_113623.jpg

Routing new wiring, conduits, clips, note the seperate ACC, B+ and GND lines
https://lh4.googleusercontent.com/-f...420_151321.jpg

Progress...
https://lh5.googleusercontent.com/-a...420_164415.jpg

Ta-daaa
https://lh6.googleusercontent.com/-v...420_170947.jpg


FYI the job is not quite done....still have to make a sensible decision on vehicle speed sensor inputs, trip info and fuel consumption details, screen power, navigation drive power, more tidying up and safe wiring practice...

...plus haven't fired up the navi with everything else connected...stay tuned for tomorrow's update folks...

nice, i see you finally got the dvd rom to sit in proper.

Not quite sitting proper mate....cant get a hold of mrgu to source the missing part.

I've done some dodgy engimanearing, oversized washers to act as a spacer and doubled over on the cubby hole mount...seems to work ok....will know more tomorrow :D

Quote:

---

Originally Posted by ozy944

.cant get a hold of mrgu to source the missing part.

---

Cos he s in bloody china. . Lol

Oz .. Which part is missing? I watched him taking it off. Shouldn't miss any parts except for the damaged air vent clip which I will chase up when back.. Otherwise good job on fitting it mate

That explains things! haha

Mate, theres another bracket that mounts the brackets attached to the dvd drive...i.e. sort of like a rectangular double DIN unit....

@ longers...reckon you've got a photo around or something to help mrgu kick some wrecker butt? :)

Ladies and gents....I'm stuck :(

Faulty dvd drive. Won't eject the dvd (genuine honda dvd in drive)...powers up but doesnt spin properly....any button presses cause it to chuck skitz.

Mrgu - anything you can do with your wrecker about this?

https://lh6.googleusercontent.com/-2...421_171234.JPG

That's a bummer...I will definitely follow up when get back.oz

its good someone is having a real red HOT go at this.
THere has been so many previous posts about trying to retro fit it.

Hopefully u guys can pull it off.

Thanks for the continued support gents. On the bright side, conceptually this will work on any 7th gen accord euro both pre and post facelift.

What i need is a volunteer fault finder. Someone who can plug my wiring harness into their satnav. I'm happy to pay postage both ways andi can guarantee no harm will come to your car.

This or someone lend me their DVD drive lol. I need to drill down to what exactly is the problem.

Any volunteers?

which state are u located in?

Tasmania...though I'm up in Victoria quite often (not with the car though). Happy to post bits + instructions for anyone keen?

A happy update, things back on track....final install awaits... :)

MRGU - any updates on getting those brackets from the wrecker?

https://lh6.googleusercontent.com/-R...510_163755.jpg