knowing pgclee it means high rpm.... just like 2TEASE that died shortly after tuning:rolleyes:
Printable View
knowing pgclee it means high rpm.... just like 2TEASE that died shortly after tuning:rolleyes:
I've organise smth with Motec tuner, Daniel, let him have the say then see how things goes...
pgclee, I'll say it again.....this thread is not about tuning YOUR car. Read the first post and then look at your replies.
You have a warning PM.
With stock internals....leave the factory x over point otherwise with B/C spec cams....Get it tuned properly on the dyno
If you get it tuned on a dyno, set the vtec at 7000rpm and see what power it makes then set the vtec at 3000rpm and see where the 2 lines would cross and set your vtec there.