Crx Delsol 1/4 mile times..

Quote:

---

Originally Posted by Twincam16

Saxman - what materials and designs have they come up with so far? Very interesting...

Any information on net about these you might know of>? Cant find a thing!!

---

originally, I was actually working out designs to make and produce rear diffusers in carbon. Unfortunately, life took a turn that won't let me do that... so I can't do that anymore. Recent endeavors have been using thin guage sheet metal. basically running from the rear subframe to the bottom of the bumper, trying to maintain an ~5 degree angle to minimize drag(can go a little higher for more downforce, but first and foremost we're trying to minimize drag here, not just make downforce), and closing off the bumper from air flow that way. I'll see if I can't find some pictures of what's been done in that regards so far.

Thanks saxman. Interested in this. Going to get some large cardboard tomorrow morning from somewhere and take it to my mates workshop to measure up under car.

If you can send some links for pics would be appreciated. Thanks Sax

Edit: If this gets done in next few weeks, will run the car down 1/4 again and see what difference it has made to my ET without any changing mods.

you've got main twincam

Thanks Saxman. Most likely going to use aluminium instead of fiberglass or mdf.