thanks heaps c1v1c
Printable View
thanks heaps c1v1c
heh, nice DIY,
i was going to do this with a push-on (not push-on/off) switch from jaycar, does anyone know the amp rating at 12V the switch needs to be?
edit: i've found a really slick looking spst momentary switch thats rated 8A at 125VAC. would this be enough? link
edit: i did it today with that switch and it works fine! :D
the ek has markings on the back of the key barrel for the wires, for bat, acc, IG(2A), ST and another one which i didnt see...all i did was run a line from battery-switch, and switch to ST (starter motor). works awesome. a nice bit of bling!
another question, does anyone know the configuration of the barrel, eg. is it possible to use missile switches for accesory and ignition position and only use the key+barrel for immobiliser purposes?
post up pics man :)
also, suijin can you reload the images in your original post.
thanks
It would be possible.. But I not sure the RTA would be happy about it, as I am not sure this kind of setup is allowed in a road legal car.. I could be wrong and if I am someone can set me straight.Quote:
Originally Posted by redefine
i cant see why it wouldnt be
it has nothing to do with the roadworthy of the car.......
yeah, i dont think it would be illegal.
i guess more specifically, would it be bad to have the key in the acc position (so you could turn the wheel) and a switch connecting the ignition wire at the same time.
i might not end up doing it anyway, the more i think about it, the more i think it might be an annoyance.
anyway pics from my install.
http://i53.photobucket.com/albums/g5...h/IMG_2205.jpg
http://i53.photobucket.com/albums/g5...h/IMG_2204.jpg
and an extra teaser of my next project. currently not done cause i'm trying to source some small but necesary parts. will post a writeup when i'm done ;)
http://i53.photobucket.com/albums/g5...h/IMG_2203.jpg
can a fd1 start button be used for this DIY?
you can use whatever start button you like, as long as its a momentary switch, and theres a spot to mount it
I have recently done this instal into my EG.. I put it in place of the cigi lighter.. But at the same time I have kept the cigi lighter wired up and hanging freely out the back of the centre console (where the aircon vents go to your feet).. Soon ill make a perm housing for it behind there and it isnt just flopping about.. Reason for keeping it was for portable GPS.. Will take some pics as soon as I get a chance for all to see..
sorry guys but i cant view the pictures.....any help?
guys is it me or i cant see pics for this DIY