I haven't got my car. When did you see it?Quote:
Originally Posted by fchiew0304
Printable View
I haven't got my car. When did you see it?Quote:
Originally Posted by fchiew0304
my mistake, i drove pass the workshop this morning and saw ur ride still in there.. hmm.. i think it shud be another euro with the same blue mugen body kit that stays in point cook as well.. do u know any1 who owns the same blue euro wif mugen body kit? i spot the ride at around 5pm yesterday..plate number : TXX xxx.Quote:
Originally Posted by Atjo
rich guy:pQuote:
Originally Posted by mars_panas
no lar living with parents LOLQuote:
Originally Posted by fchiew0304
It must be my friend's friend car. Is it with a gold rims & not lowered?Quote:
Originally Posted by fchiew0304
yea.. it`s not lowered but not really sure the rims coz i was more focusing on the driver, thinking that it shud be u.. LOLQuote:
Originally Posted by Atjo
Just pick up the car from a workshop today to fit the exhaust tips.
http://img148.imageshack.us/img148/2011/img0197u.jpg
http://img151.imageshack.us/img151/205/img0198m.jpg
hmm..... not quite right......... a bit too much extend and round tips will fit better with yr rear lip kit
I prefer oval than round. The tips 1cm more out than what i wanted but it's alright at the moment. It looks better in real life.
hmm looks bippu Dan another top work :D
Went to DT Panels this afternoon to swap my front bumper with my friend's 05 front bumper.
Bumper off
http://img110.imageshack.us/img110/1037/img0200z.jpg
Before:
http://img15.imageshack.us/img15/1378/img0175dqh.jpg
After:
http://img22.imageshack.us/img22/4936/img0202l.jpg
I'll take the picture from the side tomorrow.
aha!!!! wad is the difference between the 2 ? is it the chrome strips ? or ? Dan ur car is getting hotter everyday :D
i dont see much difference Dan? what did i miss?
looks like chicken bun.....haha...not bad mate...very unique look to be honest. only one kit in melb i assume
Thanks, we should catch up sometimes.Quote:
Originally Posted by felixd
If you see closely the number plate, before the lip sits much higher because of the facelift bumper and the lip covers the chrome strips. With the pre-facelift bumper the lip sits perfectly under the rego and the chrome strips. You'll notice it better from the side view.Quote:
Originally Posted by STTICH
Thanks, it looks much better in flesh. I took the photo using my crappy iphone camera heheQuote:
Originally Posted by kongfu
Nice white ody......... r u going to lower it soon?
Just took the picture from the side half an hour ago.
Before:
http://img9.imageshack.us/img9/117/img0177a.jpg
After:
http://img299.imageshack.us/img299/1319/img0214y.jpg
You can see that with the pre-facelift bumper the front lip lines up with the side skirts. Before, wht front lip sits higher than the side skirts.
Small addition, Spirits eye lid - thanks to KECIL.
http://img356.imageshack.us/img356/5449/img0217.jpg
http://img356.imageshack.us/img356/9553/img0218.jpg
I'm planning to lower it but still not sure whether using coilover or air suspension.Quote:
Originally Posted by psalm23
ohhh nice nice nice air runner :D
very nice Dan, can see the difference from the side definately.
with the kit, car seems to be sitting quite low already? cant imagine when its lowered. mat b too much trouble too.
Need 20" at least with this bodykit. Someone even suggested to use 21" heheQuote:
Originally Posted by STTICH
Dan, wer did u get the eye lids for the headlights?
From indo, my friend bought it for me, from Inspire i think.
Hi Atjo (or Dan) salam kenal....
I've been around for some time but this is my first post.... about your flip key, your car is 2008 model right? does the key has chip (or transponder) in it? I went to a locksmith and he said he can't copy the key for me because I won't be able to use it. He said the original key has a chip in it which can't be transferred. Is it true?
btw, ody-nya keren boss... tinggal di lower aja, siip dah..:thumbsup:
It will work, you just need to take out the chip and put it to the flip key. You can do it yourself. Are you the one with the silver RB1 with trafficstar rims?
Met kenal juga, namanya siapa ya?
Ok, will give that a try...
No, I'm not the one with silver RB1.... I just got into this ODC fever a month ago :p Got myself a 2007 odc... used to drive a mazda 6. My first mode with this car was to change the headlight to HID...
btw, gw Riko...
There seems to be more ODC owners out there than i realized Dan :p
spotted ur white "bear" parked outside the chinese restaurant along chinatown just now. nice bling bling rims.. :) wakakaka
haha i might put standard rims back again as i wanna take last photoshoot for the euro.
LOL how did I miss this??????
good work dan! love the car heaps!
Just arrived at the office today. Apexi power intake kit. Will try to install it on the weekend.
http://img35.imageshack.us/img35/9311/img0220z.jpg
http://img132.imageshack.us/img132/8817/img0221a.jpg
http://img42.imageshack.us/img42/2527/img0222h.jpg
http://img30.imageshack.us/img30/1316/img0223x.jpg
walahhhh ganti juga bos :) can hear vtec more clearly :)
nice dan...
dunno if you've seen this.
http://www.youtube.com/watch?v=tm7Gr...eature=related
http://www.youtube.com/watch?v=TMNEe...eature=related
very nice vids n tks.
The car is too quiet and i will miss the vtec sound when i sold my euro heheQuote:
Originally Posted by felixd
I've seen the videos and it makes me wanna lower it asap heheQuote:
Originally Posted by kitbkk
Gonna put supercharger kit or HKS bolt on turbo kit on your RB1 Dan?
IMO need to try sth different.... : )
I wanna get RB1 for daily : P
RB1 Greddy turbo kit :D hihihihihi
Change the engine to NSX engine :p
I've seen these before :) Nice vids, i still wonder how in showcase#3 the rear wheels on that RB1 was soooooooooooooooo close to the vender and still able to move without problems :p "The sheer mechanix of it is just mind boggling" LOLQuote:
Originally Posted by kitbkk
Nice Intakes Dan :) When it comes to choosing wheels Dan let me know i might suggest a few ideas :)
The intake was installed on the weekend. Just had the time to take the pictures today. I will make the enclosure later to make it as CAI. I can feel the improvement on the acceleration when using tiptronic. But i don't know how significance is the improvement as i never floor the car when still using stock intake.
http://img33.imageshack.us/img33/1756/img0224y.jpg
http://img39.imageshack.us/img39/4597/img0225rql.jpg
http://img132.imageshack.us/img132/1058/img0226p.jpg
Should i use 20" or 21"? You know that the body kit is quite low even when i haven't lowered the car and i don't want to have a big gap between the tyre and the fender. When Jeffrey using his 20" there's still quite a gap between the tyre & the fender.Quote:
Originally Posted by frekila
http://autoshow.permaisuri.com/autos...ame=119581.jpg
http://autoshow.permaisuri.com/autos...ame=119582.jpg
I say 20" with AR so there will be no gap and problem solved LOL
AR still too expensive at the moment, hopefully our $$ keep getting better. I asked my japanese friend to look for air suspension beside AR in Japan.
ur intake is looouudd!! hahahaa i prefer 21 dan, so u can lower ur car without hassle with the bodykit.
Hey Dan nice intake :thumbsup:
can't wait to see ur car in the flesh....
wahh nice Dan i think 20 with deepest dish that you can get will be enuf for the oddysey + air suspension :) hihihihi
20's with some of those Airforce suspension (tw) there still pretty good, if the airrunner is too expensive.
Nice ride you have there mate. Bag it for sure!
I never see you anymore in the freeway heheQuote:
Originally Posted by mars_panas
Sure, same as you right ;)Quote:
Originally Posted by felixd
I already have the dealer price for Air Force but i'm not sure with their quality and they asked me to order 10 sets for the first order. Do you know much about Air Force?Quote:
Originally Posted by [ IV 23 VI ]
Thanks.Quote:
Originally Posted by -=Roe22L=-
i don't live in hoppers no more... i live in Taylors Hills close to caroline springs...Quote:
Originally Posted by Atjo
weekends i am in Hoppers :p
let me know wen ur havin a bbq at ur house and ill come :)
What do you guys think with these rims?
Leonhardiritt Waffe
20x9 +33 & 20x10+32
http://img132.imageshack.us/img132/5...er20001fz5.jpg
Trafficstar RTS
20x8 +23 & 20x9 +23
http://modupload.com/images/bgm30jfiuc8gi7m7inga.jpg
Trafficstar DTX
20x8.5 +36 & 20x9.5 +45
http://modupload.com/images/rgefqjvfsfic2bwbiqc.jpg
typical indo style VIP : )
if i had to choose i would go for the 1st or 3rd one....
3rd ones for meee
style - 3rd set, dish - 1st set
3rd one! typical indo style
1st one for me euro thx :) how much will that cost any one ?
The price is around $2700-$2800 + shipping from indo. They are genuine rims and only been used for autosalon/competition. I'll see if i can negotiate with the price. I like the 1st & 3rd but not much dish on the 3rd one. The 2nd one has the most dish.
ow ow ow.. Leonhardiritt Waffe FTW.. If your not getting it, I will... hahahaha
First one for sure..:D
Personally I like the 3rd set (DTX) , but thats because I already have them! hahaha, the 1st is Alright but I dont like the step on the lip.
I think I would go the 2nd set (RTS) cos the dish on it, plus its offset is better for ur car when u slam it they wont hit the inside of ur airbag, Also u can show off a BBK!
PM me about the airforce, Ive been enquire about them directly from a seller in Taiwan.
I like the third set then the first. I want a set too. hehe.
1st only. 2nd and 3rd one looks like its from a commodore
The 3rd one doesn't have a lot of dish. Most likely i'll go with the 1st one but i'm just affraid that the rims will stick out too much because of the offset.
I took out the cover and put the intake manifold cover from my euro just to test the fitment. It looks fine and i think i will order the correct intake manifold cover + the bolt from Japan.
http://img46.imageshack.us/img46/3586/img0228c.jpg
And i will try to put the JDM rocker cover from my euro as well. It should be fit right?
http://img46.imageshack.us/img46/8058/img0227r.jpg
haha nice one Dan thats how you do it :) looks much better
intake cover is the same as yr Euro so it fits. you can order the bolts and nuts fm Honda dealers here and only cost AUD 30+. let me know if you need the part nr?Quote:
Originally Posted by Atjo
JDM rocker cover should fit (i use the stainless Ingen one fm US) but just limited space for screw/unscrew near the brake cylinder :thumbsup:
I still need to buy the intake manifold cover anyway and it was supplied with the bolt as well. $73 for the black & $120 for the silver. I still need to ask how much for the shipping. Do you know how much is the price for intake manifold cover from Honda? Or can i use RB3's cover?Quote:
Originally Posted by AusAccord
http://img17.imageshack.us/img17/3707/intake4.jpg
http://img13.imageshack.us/img13/2446/intake5.jpg
i remember it cost AUD 150+ for the silver one (for Euro CL9) fm dealer here but not sure if bolts/nuts would come with. based on my bare eye determination, RB3 cover should not fit as different design on intake manifold but i could be wrong.
I just called one of the dealers and they quoted me $264 for the cover. The bolts & nuts around $2-$3 each.
Hey Dan if u want i can source u one from my frend :D last time i bought mine for $150i think :)
^^ my memory still alright and not too old then, thats why i chose the used one fm US cost me AUD75+ shipped
the one i bought was the silver one though and new from honda
I'll buy if less than $100 hehe why you need to buy again?Quote:
Originally Posted by felixd
I might just buy the black one cause i'm going to paint it to white anyway.Quote:
Originally Posted by AusAccord
Love the first rim!!! and the price sound cheap for a 20". but did you want to go 21??
hmm cuz the previous one screwed up from smoothing DIY lol hahaQuote:
Originally Posted by Atjo
I like the Leonhardiritt Waffe, but you do know that the offsets measurements on most of those wheels require air suspension Dan......
Can I suggest these babys :D
AME GRACER
http://i423.photobucket.com/albums/p.../Wheels/44.jpg
CLUB LINEA L368 (like mine but white face :) )
http://i423.photobucket.com/albums/p...20_color06.jpg http://i423.photobucket.com/albums/p...eOdyssey02.jpg
CLUB LINEA L612 - WHITE FACE
http://i423.photobucket.com/albums/p...20_color07.jpg http://i423.photobucket.com/albums/p...20RB3/001b.jpg
For matching list please visit these site:
www.crimson-inc.co.jp
www.ame-wheels.com
Just ordered the 2 black intake manifold covers.
ur getting 2? whats the second one for?