Whoops, forgot to mention its 19 x 8.5 with an offset +40
Printable View
Whoops, forgot to mention its 19 x 8.5 with an offset +40
i think the tires size r abit too fat :) try thinner if u can not necessary have to b stretch just low profile tiresQuote:
Originally Posted by nudal
Thanks bro.
Felix, uve seen my car. What would u suggest The size I should get without a drastic mods. I was thinkn next set will be 19s.
19x8 offset +42 will b sweet with 235/30/r19 tiresQuote:
Originally Posted by nudal
tires are too big 235/30/19 tires on 8 inches
225/30/19 would look alot better or even 225/35 if possible
thanks for the input guys
Guys,
Am i really pushing it by getting a set of 19s x 8 et +38. Consider the guards are not rolled? Will this fit?
Cheers
should b ok
cheers bro... many thanksQuote:
Originally Posted by felixd
I'm considering +30 8.5" for the rears..do you reckon I could get away without rolling the guards? I've got a finger and half gap at the back..cheers.
sounds good :D make it x9 for the rear
or 9.5 for the rear
anyone wants a set of buddy club n+?
Pm me :)
thanks
Quote:
Originally Posted by felixd
lol I'm not going for the VIP look so I dont really want to go wider than 8.5". I've tested one of the rears and i reckon it will be ok after the guards are rolled..Quote:
Originally Posted by [ IV 23 VI ]
Hi Guys
wondering if i can get some help with running 17x9 +35 all round?
im guessing 225's will clear with some negative camber on both front and rear? im just wondering how it will go when turning?? anyone experienced issues with full lock running 9s at the front? also what front and rear camber kits give the most negative camber?
I have a random question. Let's say I will fit 18x9s for the rear with some of the modifications such as lipping and pumping the guards. Will these modifications affect Pink Slip?
No.. height wise, yes.
WOW!Quote:
Originally Posted by .QD
What kind of wheels are these QD ?
THAT IS SPECTACULAR!
Work meister s1sQuote:
Originally Posted by Bigpauly2788
do u guys reckon enkei rpf1's will fit with size of 18x8 with +35 offset on the cl9 without any lipping?
should be fine....rpf1 are hot..
depending on how wide your tyres are, you might need to roll your guards
was considering going 215 and stretch them
should be fine. what are you lowered on?
not lowered atm but will be dumping it when funds come in haha
getting fn2r(18" civic stockies) rims for my euro. was thinking of running spacers. they are 18's with +55 offset. was gonna get like 8mm for the fronts and 15,20mm at the rear making like +47 fronts +35 - +40 rears. Anyone know if this would b a good look? Should i go with 15(+40) or 20(+35) spacers at the rears?
+40 at the rears should be fine coz i'm running 8.5" +41 and one finger gap with no scrubbage. Even if you go to +35 it should be fine coz I've tried 8.5" +30 at the back with no scrub. So, if you want a more flush look then go +35.Quote:
Originally Posted by YBJLS4
there's a couple of guys in here uses them oredy they look orite i dont thing there's a scrubbing issues even you dump it too. hmm why spacers ???
ye my cars pretty low already just want the spacers for a more flush look rather than sitting a mile inside the guards like the 16's look when dumped.
so a 18x8 +35 would be a good look on the rears? ill be running -2camber at the most. also +47 fronts?
My last set of wheels were the FN2R rims... I had no issue with any of the above mentioned. Personally, I didnt run any spacers and the look of the wheels whilst it was dropped was the BOMB. Refer to the forums to locate the image.Quote:
Originally Posted by felixd
How would 19x8 with roughly +38 offsets and 225's up front and 245s at rear sit without rolling guards.
why would you go 245 at the rear? keep it all at 225. 8" +38 at back should definitely be fine without guard work. however, the front will probably require guard rolling if your slammed.Quote:
Originally Posted by xtat1k
just found some wheels that i like and theyre off an s14.
fat chance but was woth a try ..
ybjls4 cant pm u inbox full
cleared brother
Hey guys I need an opinion
I am looking of selling my HP designs with 19"x8 dont know the offset to be honest
I am looking at buying a new set of wheels 18"x8.5 +30offset front and 18x9.5 dished +30 offset i think as well
can anyone please answer me in regards of this
pushing it a bit bro...need camber arms fr and rear...certainly doable
Really? what camber amrs do i need? please advise and i will post to WTB threadQuote:
Originally Posted by acura_ek1
Yep you'll definately need to get camber arms front and rear. I'm running 18x8.5 +40 at the rears and it fits nicely with -1 camber. With the 18x9.5 + 30, thats pushing it but its doable. gotta full camber itQuote:
Originally Posted by raffyboy
Besides fitment you should consider how these very heavy wheels are gonna affect the way your car drives. If you dont really care about handling then go for it but if you do steer clear. Looks aren't everything and you cant see your sick wheels when you are driving.Quote:
Originally Posted by raffyboy
So what do you guys suggest?Quote:
Originally Posted by racerwannabe
well im thinking now of getting 19x8 +40 or +30 for the front then camber it then 19x8.5 for the rear camber it
what do you guys think?
heavy? i dint see him mention the weight of the wheels... did you?Quote:
Originally Posted by racerwannabe
depends what the rear offset it is, iv got 19x8 +40 front and 19x9 +35 rears, fronts need no camber, im riding about 60mm of the ground at the front with guards rolled and i dont scrub, running minimal camber on the rear and riding very flush, never scrubs either, but ive rolled and pulled the rear guards, modified the rear bumper etc... i put some 18x9 +25's on the other day in the rear and they sat very nice and im gonna chuck some 18X10 +10's on next weekend and see if i can make it work, should be fun!Quote:
Originally Posted by raffyboy
Nope but it's an important factor to consider.Quote:
Originally Posted by euro_tr4sh
Sounds alright but ill be getting camber arms first and see what i can do with the carQuote:
Originally Posted by euro_tr4sh
def want a pic of 18x10 +10's on a euro. im thinking about going 9.5 +22 on the rearsQuote:
Originally Posted by euro_tr4sh
thats what i want 9.5 on the rear
look at these sites and work it out
visual reference:
http://rimtuck.com/thumbnails.php?
offset calc:
http://www.1010tires.com/WheelOffsetCalculator.asp
18x10 wohoo
what do you's reckon?
Too chrome for me. But should be alright.
What size?
ye didnt want to make it too sport. so got a a japish style in chrome. there 19's +45. you reckon they'll be flush or need spacers?
Nah run some spacers if you want, but I wouldn't recommend for obvious reasons... +40 would be ok flush, +35 with a little -camber would look nice!
Hi
Im looking at getting GP SPORTS Gullflame 18"
Front: 18 X 8.5J +25
Rear: 18 X 9.5J +35
PCD size: 114.5 X 5H
Would this fit on a 05 euro
fronts you will gain 11mm more inner clearance and extend out and extra 49mmQuote:
Originally Posted by elitee
rear you will lose 12mm inner clearance and outer will extend an extra 52mm
Would there need to be much guard modification to fit them in ?Quote:
Originally Posted by shmivic
Also would they clear the stock brakes ?
i think there would be substantial guard modification required and some heavy negative camber.
unsure regarding the brakes but id say they would clear them.
The Gullflame's look hot! Don't think I have seen them on a euro.
Regarding the specs, the rear can be made fit with some 225's if not 215's with anything more than -3 to -4, guards rolled, and rear bar shaved.
Front wont have any problem with brakes FOR SURE. But you will have problems with the guards instead. It could be done with -4 camber in the front with 215 tires. Front specs is too crazy! Could be done but I would hate to drive it LOL.
haha ye i wanted to try something unique, it sounds like alot of work tho.
maybe i should look into lesser width.
would 7.5" - 8" front and 8.5" rear do the job? i like the concave look so id like to keep the offsets low as possible.
8.5 front and 9.0 or 9.5 rears is where its at.
i run 8.5+42 all round and its just right, guards rolled a little, slammed and natural camber.
no scrubbing at all.
the rear could use a 10mm spacer tho but im not bothered, very happy with the fitment as it is.
Hey guys
im looking at 19X8 40+ offset on all 4 wheels
my car has been lowered on pedders springs and im just wondering if i will have scrubbing issues?
Cheers guys
i think you will be pretty safe with that size.
+2mm inner clearance
extend +28mm outer.
pedders springs about 1.5" drop?
yeh about that. it should look good shouldnt it wont sit too high tho will it?
comes down to personal preference,
19's look good, they fill the guards nicely.
heheh that gullfame is very nice wish the rear is +25 n the front is+35 :) lulz looks like te 37
checking a bbs wheels today and hope it will fit
BBS LM's and you are the man.
hey, i'm looking at 17x7 5x114.3 +38 for my cl9, how would that go?
You shouldnt have any rubbing issues even if your car is quite low. I'm running +30 7.5" front 8.5" rear lowered with no rubbing.Quote:
Originally Posted by maestro
oh ok, everything is stock so far, will it sit too far out?
It will not stick out. Maybe close to flush.Quote:
Originally Posted by maestro
oh ok, would i need to get new tyres to fit 17x8.5 rims? im on the stock 17" tyres right now (im pretty sure they're 225/45R17)
225/45/17 is fine for a 8.5" wide wheel, no problems at all. Won't even be an obvious stretch.
ahh i see ok... what do you guys think of gold/white wheels on a black cl9? also, would 10x114.3 fit 5x114.3?
hey guys , i'm looking for a 18x8.5 5x114.3 ET48 for my cl9, how would that go?Would the offset clear the front suspension?Thanks..
Shit yeah! +48 is very conservative offset and 8.5" isnt wide enough to cause you grieve. do it.Quote:
Originally Posted by max9907.0422
would look alright, depends if your going for race look or baller style.Quote:
Originally Posted by maestro
10x114.3 fit 5x114.3? WTF, for example, 18x7.5 (18" by 7.5" wide); 5x114.3 (5 studs x 114.3mm between each stud; aka PCD)
Not clear.
yes +48 is plenty.Quote:
Originally Posted by max9907.0422
i'm running 18x7.5 +40. not as wide though.
hi aaron, still trolling the forums....i see.Quote:
Originally Posted by racerwannabe