go forth pawn
Printable View
I have come to terms with the fact that 80% of ozHonda posts are troll -_-
See below lad
Nice
You idiot
Actually 80% of ozhonda posts consist of people correcting people like stevil who give out incorrect information and believe shit from shitty tuners and relay that to other people.
Renzo who turned the light on !! lol you havent corrected shit ( Face Palm icon needed here )
Plenty of K series rollin 150kw + with 2.5inches, you just dont get it do ya ! Just go end enjoy whatever shit you want haha
oh yizz,
round 2.
Fight!
Brb getting maccas, wait for me!
yes stevil mate you're 100% right you can use 2.5inches and make power.
but it has been proven time and time again 3 inch is infinitely better and you'd be stupid to go 2.5 inch over 3 inch.. and you also forget that question that been asked was:
this advice coming from a man in the scene who KNOWS what he's talking about. who has built multiple mental ks, not just slapped a rotrex onto a stock blocked motor, did a power run on the dyno, blew it up then started again.
not only that, but you are clutching at bloody straws saying just because the cat and reso aren't the same therefore the dyno results aren't valid. at most you can account for maybe 2-3kw by having a different cat and reso, but otherwise the results speak for themselves. not only that actually, but both runs (in the dyno graph) were done without a cat ('merica) so there's one variable you dont have. even less straws for you to clutch at.
The gift that keeps on giving
Lmfao
Hahahahahahahaha
Shiiieeettt carayan nails it again
http://i.imgur.com/VQLGJOL.gif
This thread just keeps on delivering
Carayan yes he did reveal he had a stock exhaust system after advice given, whats your point ?, doesnt change the fact that he was advise that he would need a 3inch system to get 150kws and ive pointed out that 2.5inch is plenty.
For $1100 dollar to gain what a few kws and alot more drone ??
Carayan ya clutching at straws, mate dial in a bit of camber and ya dyno numbers change, diff rolling diameter of tyre and dyno numbers change ! so many variable when dynoing cars. That you dont get this doesnt suprise me B-(
' anything less than 3" would be a waste of money '. lol That is incorrect advice if you only want 150kw at the wheels !!
now where's that potato peeler B-)
I guess the 1 good thing this thread highlights is who not to take advice from ! B-)
Hey Carayan I like how you use the word infinetly better, now WTF does that actually mean ? lol, why cant you post your own experiences ?
Lol so much mud in hear
He's already decided on 3" zorst m80
Now that this is settled, let's spam some more, get onboard m80's
http://iliketowastemytime.com/sites/...ar_jump_in.gif
Take this post with a grain of salts
Stevil, no one wants to pay for a 2.5inch exhaust, and 2 months later want more power and pay for 3 inch
That's why you save your money and get rid of all restrictions from the start. That's the whole point of getting a exhaust.
Nutting wong wit dat clunt, spam is now served with a grain of salt.
I concur dear sir.
http://img.pandawhale.com/post-31100...ar-an-ZCte.gif
http://33.media.tumblr.com/tumblr_m6...eyg0o1_500.gif
Das it.
I didnt argue for choosing a 2.5 over 3.0 ! merely stated that a 2.5 will do the job, as I said before the he didnt state what base he was starting from. I know from my own experiences that my thick walled mild steel 2.5 zoorst had no trouble delivering 150 Kws +.
stevil man you are right yes, you can use a 2.5 blah blah blah
3inch is better. its more expensive yes, not only that buts its also more future proof. we get it. you have a 2.5 inch. you made 184bypwats.
the bloke asked which was better. he was told. he was told why. thats it.
end of story.
keep on pissin into the wind buddy ! you win lol B-)
Everyone is winner okayz!?
<33
Where did you get your tune Stevil and what mods to make 184kw..? that seems extremely high.
lol twist my words, I guess all the other K series out there rollin 150 and 2.5s must be BShitting, the OP didnt ask which was better but what was needed to get to 150. Im just as mindful as any other moders when it comes to spending coin. 2nd hand tyres, sways, rotors, rims, seats, motors, gearboxes, panels. I absolutely flog the crap outta my car at the drags, on the road and at the track. I do 55k a year, 10+ trackdays a year, tow a boat and dont give 2 hoots, time to turn the light off Renzo !. Ill say it again yr a Serial shit talker.
Lmaoooo
best thread in ozh
vote +1
I feel so special, thanks you guise :')
Is there such thing as a moderator on ozHonda? Lol
moderators dont look at every thread/post
there is a report button you could use to bring any post to the moderating teams attention
Quote:
I saw a guy come into the middle of a bank, pull down his pants and shit all over the carpet.
Don't mind me, just making a deposit.
oops thought this was the spam thread
http://pix.iemoji.com/sbemojix2/0240.png
doosra opinions have been giving in the past Ive nuthin to add. The threads about a zoorst !
Renzokukenj every time I see 1 of your post now I think of the Mushroom scene from the Hangover 2 B-)
Stage 1.5 byp motor
So prob frank + cams
180kw is possible with that
Im starting a mission today.
150KW DC5 ATW.
Calling you a mushroom ? Lol, you need to htfu you poor sensitive soul ! Seriously you're the 1 doing the derailing here, keep it on topic or is that beyond you ?
And how I spend my money is nobodies business but my own B-)
sudden urge for some shiitake
Dead giveaway that he's mud coz he's changed his sig in an attempt to insult Renzo lmzo
This thread delivering hard, dunno if it's peaked yet
http://media20.giphy.com/media/vWDre...iphy.gif?w=320
Thread peaks tomorrow at defqon
Ok
I don't think so lad. I'm providing relevant information, you try and prove it wrong, fail at it, and start to get personally attack me.
Definitely isn't, but would definitely be in your best interests
I can't see signatures on tapatalk, and haven't logged in on the Web in months, what does it say lol
Lol just to show how infantile renzo, caravan and super have been, they all held hand and neg rep'd me ! whilst other gave me the thumbs up, so I guess we have 3 shiitake growers now ! 1 word boyz LAME, you boyz need to get a life.
It shows your intent either way Renzo, I feel sorry for the guy who wanted accurate info, you have an alterior motive for attacking me ! LAME, youve been a serial pest on ozhonda for a long time ! Gunna go prep my car for the drag battle tmw B-)
Again point out exactly where I gave incorrect info ! you cant B-) so drop it ! Ofcourse you ll probably quote me out of context as is your habit. This aint about winning an argument but sharing experiences which may help the OP, dyno s just give numbers, stop watches dont lie. Have a nice day B-)
Ok
Yes, 3in will give more power
I don't slip into full retard at a drop of a hat, but I can do a mad freestyle at a drop of a beat
I'm not actually a shit talker, and I can tell shit from clay, they are very different
You actually make 184bw, not 184kw, big difference
He didn't want a coffee with his donut
Not a correction, but amant is trolling you very hard
I had a lot of whatever you were referring to, and yes I have pubes, but in funny places (Asian genes)
I don't even know what you mean in this post
The only thing I do in a dark room is squeeze my abdominals, open my anal flower and allow passage to my waste, aka poo
This was all posts on one page I found.
There are 6 more pages of your shit.
Hot potato hot potato
Stuck in the mud
http://www.ozhonda.com/forum/customa...ar29948_16.gif
http://theollingroup.ca/wp-content/u...013/12/mud.jpg
not even batman can save you stevil