EP3 Type R

Printable View

12-06-2009, 08:58 AM
white_ep3_civic

Well that explains slot cause I do have a busted engine mount. Waitin for the dealer to get the part in still!! Wat time is the meet up?
12-06-2009, 11:06 AM
Mugen_B16B

might aswell go get some aftermarket, alot of people find it much better though there might be abit more vibration but hey, more power to the ground lol

also make sure to change ur gb oil regularly and u should be sweet
12-06-2009, 11:24 AM
icecrm

i put my Fuji rm01a myself but notice abit of vibration so just took it to carline and they fix that for me
12-06-2009, 11:31 AM
icecrm

im having that same problem with 2nd gear, change the oil, still notchy at high revs.
Hanny's think its the clutch
12-06-2009, 11:41 AM
Perry

Quote:

Originally Posted by Nepolian

Two general reasons why gearbox is notchy, oil and engine mounts. I generally point to mounts!

The gearbox is very strong, unless it has been neglected and tracked (lots) there should be no issues with it.

ohh man my 2nd gear is hard to get into when its cold though thought it might be my gearbox oil.
12-06-2009, 12:33 PM
Seren1ty

Quote:

Originally Posted by Nepolian

Looking at this guys.....a very nice drive! Realistically we're looking at about 2.5 hrs.

Directions
Start:
McDonald's Family Restaurants
218- 226 Pennant Hills Rd, Thornleigh, NSW 2120
Via 1:
Berowra Waters Rd, Berowra Waters, NSW 2082
Via 2:
Wisemans Ferry Rd, Maroota, NSW 2756
End:
Charcoal Mine BBQ House
454 Church Street, North Parramatta, NSW 2151
Distance: 109.2km
Time: 1hr 45min

Thread up very soon!

So just checking, is this the route your talkin about?

http://maps.google.com.au/maps?f=d&s...0&ie=UTF8&z=17

looks pretty good, doesnt look as twisty/fun as putty rd but not as far either so looks like a good route overall.
12-06-2009, 01:43 PM
icecrm

BTW i saw an EP3 on the M4 last night about 8ish, was following me
12-06-2009, 03:00 PM
EP3EVA

has any got lower arm brace's Front or Rear? dose it make any diff??

im looking at the carbing 6 point front lower arm brace!
12-06-2009, 04:31 PM
white_ep3_civic

Quote:

Originally Posted by Mugen_B16B

might aswell go get some aftermarket, alot of people find it much better though there might be abit more vibration but hey, more power to the ground lol

also make sure to change ur gb oil regularly and u should be sweet

Yeh I am looking at getting some really soon. Hopefully that will fix the gear box tightness.
12-06-2009, 06:05 PM
n5920787

Quote:

Originally Posted by EP3EVA

has any got lower arm brace's Front or Rear? dose it make any diff??

im looking at the carbing 6 point front lower arm brace!

Well I have a ultra front strut brace if anyone is interested. Unused cos of my gruppe m intake.
12-06-2009, 06:50 PM
bbds

got my fuji RM01a zorst on today, way to quite for me, can barely hear it.. not for my liking!!! :thumbdwn:
12-06-2009, 07:31 PM
EP3EVA

Quote:

Originally Posted by bbds

got my fuji RM01a zorst on today, way to quite for me, can barely hear it.. not for my liking!!! :thumbdwn:

lol , should got skunk2 megapower R 70mm that is what i have now. a very nice deep tone!

here pic's below..

http://img14.imageshack.us/img14/5330/dscn2878i.jpg

http://img8.imageshack.us/img8/2129/dscn2879.jpg