Sydney EP3 thread

Printable View

Show 80 post(s) from this thread on one page

07-12-2011, 09:58 PM
Perry

oh your getting the clutch done tomorrow?
07-12-2011, 10:24 PM
bluey45

Quote:

Originally Posted by Perry

oh your getting the clutch done tomorrow?

Yeah Perry. Going down to top one but have to get flywheel first at Jdmyard.
08-12-2011, 07:10 PM
bluey45

Got my clutch and flywheel done today. the car feels like super responsive and gear change so smooth! Plus also got those slotted rotors installed. my EP3 feels so different! :D
08-12-2011, 08:16 PM
Blackep3

How much for the rotors???
09-12-2011, 07:03 AM
bluey45

Quote:

Originally Posted by Blackep3

How much for the rotors???

I got my pair of Dba front slotted rotors for $380 at that Jdmyard eoy sale recently.
09-12-2011, 08:51 AM
keepitlow

Kev, did you get those ACRE brake pads to go with it as well? :)
10-12-2011, 05:16 PM
bluey45

Quote:

Originally Posted by keepitlow

Kev, did you get those ACRE brake pads to go with it as well? :)

Hey dan. Nah I just got a pair of ferrodos for my fronts. how you going with finding replacement parts for your interior? I may need your expertise. :)
10-12-2011, 05:33 PM
keepitlow

Quote:

Originally Posted by bluey45

Hey dan. Nah I just got a pair of ferrodos for my fronts. how you going with finding replacement parts for your interior? I may need your expertise. :)

Hi Kev . . Interior parts are easy to find :) brand new didn't cost that much too, just go http://www.hondaoriginalparts.com/

They have everything, even the smallest bolt on your car and delivery time is super fast . . Less than a week :)
10-12-2011, 06:58 PM
onecoop

And far cheaper than them and probably just as easy to deal with: www.amayama.com
Direct from Japan to your door. Turn around from enquiry to delivery about 10 days
11-12-2011, 02:25 PM
Lukezen27

Guys

Need a working 02 sensor

PM me
11-12-2011, 06:00 PM
keepitlow

Quote:

Originally Posted by Lukezen27

Guys

Need a working 02 sensor

PM me

Luke.. give Gavin at IMG Imports a call, he can get you one overnight~ : )
11-12-2011, 06:11 PM
Lukezen27

Quote:

Originally Posted by keepitlow

Luke.. give Gavin at IMG Imports a call, he can get you one overnight~ : )

Thanks man

I need it cheap as possible not fast as possible haha

Turned off for now but need it replaced and back on before the big Christmas drive up to the Gold Coast to see the folks

Currently getting 450km per full tank on highway driving lol
11-12-2011, 07:23 PM
keepitlow

Quote:

Originally Posted by Lukezen27

Thanks man

I need it cheap as possible not fast as possible haha

Turned off for now but need it replaced and back on before the big Christmas drive up to the Gold Coast to see the folks

Currently getting 450km per full tank on highway driving lol

Is the 02 sensor for EP3 same as DC5?

lol might be able to try Honda Parts in Atarmon and see how much they sell them for~ : ) i'm quite interested to know as well.. just incase I need it later on..
12-12-2011, 05:12 AM
onecoop

Part Number: 36531-PRB-A01? (Japanese part number# for my car, UK PN's are different)

Looks to be around $300 OEM (from Japan)
Id be interested to see what Honda AU want for it since they were double the cost of anything I priced locally and sourced overseas

Conversion to Denso part numbers here.
http://www.ebay.com.au/itm/ACURA-RSX...ht_1683wt_1396
12-12-2011, 12:39 PM
Lukezen27

Quote:

Originally Posted by onecoop

Part Number: 36531-PRB-A01? (Japanese part number# for my car, UK PN's are different)

Looks to be around $300 OEM (from Japan)
Id be interested to see what Honda AU want for it since they were double the cost of anything I priced locally and sourced overseas

Conversion to Denso part numbers here.
http://www.ebay.com.au/itm/ACURA-RSX...ht_1683wt_1396

Thanks Dude

Gee they cost a lot :(

Quote:

Originally Posted by keepitlow

Is the 02 sensor for EP3 same as DC5?

lol might be able to try Honda Parts in Atarmon and see how much they sell them for~ : ) i'm quite interested to know as well.. just incase I need it later on..

Yes there the same
12-12-2011, 12:47 PM
keepitlow

Just looking at the diagram.. our car have 2 x 02 sensors on the cat? : ( if so that's $600... oh my~

http://www.hondaoriginalparts.com/HP...ge/B__0201.jpg
12-12-2011, 12:53 PM
stienerv2

Should be one primary and one secondary. You don't need to change both.
12-12-2011, 09:37 PM
Mikeyy168

http://www.jdmconcept.com.au/index.p...vid=32&cid=101

JDM Concept has theirs for $310 each.

just bought a primary one last week. came in 2 days
13-12-2011, 08:09 PM
Perry

Been seeing a FL ep3 around Epping anyone here?
13-12-2011, 11:58 PM
Twest

Quote:

Originally Posted by Perry

Been seeing a FL ep3 around Epping anyone here?

I work around there, facelift taillights only though.
14-12-2011, 11:53 AM
Lukezen27

Quote:

Originally Posted by Mikeyy168

http://www.jdmconcept.com.au/index.p...vid=32&cid=101

JDM Concept has theirs for $310 each.

just bought a primary one last week. came in 2 days

I'm going with this one haha
Honda just quoted me $600
14-12-2011, 11:58 AM
RPS.13

If you're not in a hurry, order them from amazon.com or ebaymotors.com cheapest ones from memory were approx $140 US, I think it worked out around $170 AUD delivered last time I checked.

I had to order one from JDMYard, $350 as i needed it asap.
14-12-2011, 12:44 PM
Perry

Quote:

Originally Posted by Twest

I work around there, facelift taillights only though.

OH nah must be a different dude.
14-12-2011, 03:17 PM
Blackep3

Hey guys, just wondering who will be up for a meet this weekend before christmass??
14-12-2011, 03:19 PM
keepitlow

^^ time for another photoshoot meet! :)
14-12-2011, 03:35 PM
Perry

Sounds good.
14-12-2011, 11:05 PM
stienerv2

Just spotted a cw ep3 on woodville road. I couldn't roll down my driver window to talk lol
15-12-2011, 06:47 AM
bluey45

Quote:

Originally Posted by keepitlow

^^ time for another photoshoot meet! :)

Indeed. the question is when? :D
15-12-2011, 07:49 AM
bennjamin

soon ! How about a afternoon/night drive ? Keen to clean the cobwebs from my car lol
15-12-2011, 11:52 AM
keepitlow

^^ you didn't sell your car Ben? :)
15-12-2011, 12:36 PM
Perry

What Ben your selling?
15-12-2011, 12:57 PM
keepitlow

LOL oops... sorry I got someone mixed up, was Nepolian which I saw selling his car.. not Bennjamin :P
15-12-2011, 01:48 PM
Perry

Yep I think it was Nepolian your thnking about =).
15-12-2011, 01:58 PM
keepitlow

hahaa sorry my bad :P
15-12-2011, 02:07 PM
bluey45

Lol you boys :p
15-12-2011, 02:37 PM
Perry

hooom moonnn arrrr
15-12-2011, 02:43 PM
Poeter

lol get back to work =P
15-12-2011, 04:11 PM
bluey45

Quote:

Originally Posted by Poeter

lol get back to work =P

Lol. Works boring! :D
15-12-2011, 09:11 PM
Blackep3

So who is up for a meet/ photo shoot this weekend, I know a few of you guys are keen, hey perry what's that place you suggested??? I think it would be a good place to shoot
15-12-2011, 11:20 PM
Perry

Quote:

Originally Posted by Blackep3

So who is up for a meet/ photo shoot this weekend, I know a few of you guys are keen, hey perry what's that place you suggested??? I think it would be a good place to shoot

Rhodes car park at night less people.
16-12-2011, 09:17 AM
stienerv2

Top level has very long speed bumps that scratches my b pipe lol.
16-12-2011, 11:04 AM
Perry

I was more refering to the lower ground floor thats where all the lights are.
16-12-2011, 01:26 PM
Blackep3

Ok perry sounds good, what's everyone doing this Saturday night??
17-12-2011, 04:02 PM
Adjacent

Hardpark my car at Livo KKs and pretend people give a shit.
17-12-2011, 04:47 PM
JohnO

Yeahhhhhhhh buddy you know the deal parking it adjacent to adjacent
19-12-2011, 05:50 PM
Brando0np

heys guys just wondering how many of you are running the injen CAI? cause I just drove home and it was pouring and might have drove over a few puddles. Car seems to be running normally though, is their anyway i could find if the car will have issues from the rain? cheers.
19-12-2011, 06:12 PM
Perry

I'm using the same intake for 3 years seems ok with me just drive into a massive puddle and rev the days lights out of the engine.
04-01-2012, 09:15 PM
stienerv2

Hey guys, its been awhile since our last meet so i've decided to make another one.

http://www.ozhonda.com/forum/showthr...41#post3200741
04-01-2012, 09:36 PM
bluey45

Quote:

Originally Posted by stienerv2

Hey guys, its been awhile since our last meet so i've decided to make another one.

http://www.ozhonda.com/forum/showthr...41#post3200741

I'm in. :D
09-01-2012, 08:26 PM
micka

Quote:

Originally Posted by micka

I've been living in NSW for about a month (at least my car has lived here for a month, I've been here for just over a week) car's been driven twice to the supermarket, and I'm already down one wind deflector (driver's side)... how much per year do I have to budget for NSW thieving scum?

After about a month of driving around sans drivers side wind deflector, my car is now back to normal :)

Thanks to Japan Parts for super fast and super helpful service :D.
12-01-2012, 10:50 AM
will13

Who's going to the HCCNSW meet and greet BBQ on saturday??
12-01-2012, 12:19 PM
Perry

What time does is start?
12-01-2012, 12:26 PM
will13

10am.
16-01-2012, 04:54 PM
keepitlow

spotted lukezen27 after work today :)

you drive your car to work mate?
16-01-2012, 05:20 PM
Lukezen27

Quote:

Originally Posted by keepitlow

spotted lukezen27 after work today :)

you drive your car to work mate?

Yeah man

I drive it everywhere :)

Put my hand out but I was a bit late hahah
16-01-2012, 06:33 PM
keepitlow

Quote:

Originally Posted by Lukezen27

Yeah man

I drive it everywhere :)

Put my hand out but I was a bit late hahah

haha thought you were gonna stop at the lights up the hill, but you did a sharp right corner :)
16-01-2012, 07:35 PM
Blackep3

Quote:

Originally Posted by keepitlow

haha thought you were gonna stop at the lights up the hill, but you did a sharp right corner :)

It's called BLAT Danny, Brake Late And Turn
16-01-2012, 07:49 PM
keepitlow

Quote:

Originally Posted by blackep3

it's called blat danny, brake late and turn

rofl..
21-01-2012, 02:50 PM
damoqupak

Hey Fellas

is there a place in sydney I can buy front bulbs for my EP3? its a 2002 model.
21-01-2012, 03:02 PM
bluey45

Quote:

Originally Posted by damoqupak

Hey Fellas

is there a place in sydney I can buy front bulbs for my EP3? its a 2002 model.

Hey mate,
I got a spare pair of OEM bulbs from my 2003 EP3 as I switched mine to 6000k ones. Your welcome to have them if you want.
21-01-2012, 03:04 PM
damoqupak

nice your a champion..

PM me where you'd like to meet I'm free most of tomorrow and always can meet up after work on a weekday..
22-01-2012, 08:29 AM
bluey45

Quote:

Originally Posted by damoqupak

nice your a champion..

PM me where you'd like to meet I'm free most of tomorrow and always can meet up after work on a weekday..

Hey damoqupak, why don't you come to the EP3 meet next Friday?
http://www.ozhonda.com/forum/showthread.php?t=159282
22-01-2012, 03:28 PM
damoqupak

Quote:

Originally Posted by bluey45

Hey damoqupak, why don't you come to the EP3 meet next Friday?
http://www.ozhonda.com/forum/showthread.php?t=159282

I think I'm busy that day I'm pretty sure I am but I'll look into it.
22-01-2012, 08:46 PM
bluey45

Quote:

Originally Posted by damoqupak

I think I'm busy that day I'm pretty sure I am but I'll look into it.

Hey no probs. Just let me know when you free to come pick them up. :)
28-01-2012, 12:28 AM
kyzz

yes i was the civic giving you all a good beep in tempe
07-02-2012, 08:25 PM
NightRyder

Yo peeps!..what's happening?

Anyone up for a coffee meet? :)
07-02-2012, 08:43 PM
bluey45

sup. I'm up for it. :)
07-02-2012, 08:56 PM
Perry

When Paul?
10-02-2012, 07:23 AM
Blackep3

Who is interested in a Honda meet at kk's livo on the 11th of feb? I know it's a lil bit late for sum, I'll upload details very soon. Ok meet starts at 8pm till 11pm we might be going on a cruise afterwords or will be going to another location for photos and chat Honda
10-02-2012, 04:34 PM
Adjacent

Ill be there
10-02-2012, 11:07 PM
NightRyder

Perry, looking at maybe a friday night or Saturday morning?

Just feel like hanging out! :)
11-02-2012, 10:33 AM
Perry

Quote:

Originally Posted by NightRyder

Perry, looking at maybe a friday night or Saturday morning?

Just feel like hanging out! :)

Sounds good I'm keen.
27-02-2012, 12:01 PM
keepitlow

Would anyone know any spray painters in northshore area? want to get my side skirt and rear bumper lip resprayed.. Thank you~ : )
27-02-2012, 12:39 PM
bluey45

Quote:

Originally Posted by keepitlow

Would anyone know any spray painters in northshore area? want to get my side skirt and rear bumper lip resprayed.. Thank you~ : )

Hey Danny. Best you pm or call victor. I think he knows someone who can do it pretty good at a good price.
27-02-2012, 12:42 PM
keepitlow

^^ really, that's good... I will sms him and see :)
05-03-2012, 10:53 AM
kenny07

Hey guys!

just wondering, what is a good brand for headers for a 2002 ep3-r

something with a nice decent power gain...

any suggestions or info would help heaps...

i was planning on buddy club headers, but i was told the quality of the headers arent that great, so i've got second thoughs on them now..

cheers,
05-03-2012, 10:59 AM
Mikeyy168

JDM headers are good already kenny
20-03-2012, 06:23 AM
denrie

Guys do you know anyone selling or know where to get aftermarket tie rod ends for dc5r because I'm running dc5 coilovers on my EP. Thanks!
20-03-2012, 06:35 AM
spookz

Quote:

Originally Posted by denrie

Guys do you know anyone selling or know where to get aftermarket tie rod ends for dc5r because I'm running dc5 coilovers on my EP. Thanks!

Denrie,

I may be selling my T1R inverted tie rod ends for the DC5 soon.

If I am selling, I'll send you a pm in about 2 weeks time.
20-03-2012, 11:06 AM
denrie

Quote:

Originally Posted by spookz

Denrie,

I may be selling my T1R inverted tie rod ends for the DC5 soon.

If I am selling, I'll send you a pm in about 2 weeks time.

Sell it now! Haha nah all good thanks man just let me know =)

Show 80 post(s) from this thread on one page

All times are GMT +10. The time now is 01:14 PM.

All logos and trademarks in this site are the property of their respective owner(s). The comments are the property of their posters.