4-2-1 headers, what brand is good at reasonable price??

For 4-2-1 headers that are good at a reasonable price...
See here - http://www.ozhonda.com/forum/showthread.php?t=69494
:thumbsup:

anyone have any info one these AN-R headers?
http://www.an-r.com/bseriesheader.htm

what are peoples thoughts on DTM headers? 4-2-1 to suit D16

hey guys, what would suit BuddyClub spec III Pro exhaust system on a DC2R?

Someone told me to get Toda header....but with that combination, not really recommended for street use and X Force 4-2-1 is within my budget....

1. Toda 4-2-1
2. X-Force 4-2-1

and possibly what gains would i get roughly out of these two header systems?

Quote:

---

Originally Posted by typerdevil

hey guys, what would suit BuddyClub spec III Pro exhaust system on a DC2R?

Someone told me to get Toda header....but with that combination, not really recommended for street use and X Force 4-2-1 is within my budget....

1. Toda 4-2-1
2. X-Force 4-2-1

and possibly what gains would i get roughly out of these two header systems?

---

For a B18C you're better off saving for a better header than a cheapie.
Why, because you'll burn a small hole in your pocket with very little gained.
That is they're not much point in just buying a header for the sake of having one when it hardly out performs the standard manifold.

4-1 ftw man

lovefab customised are the best fullstop.
for the h series anyway.

if you're going for xforce 4-2-1 extractors, i'd head towards american ebay first. it will cost you $500 less for stainless steel 4-2-1 headers shipped, plus its the exact same design and material quality. only difference is that xforce ones give you their badge on it.

you might think the quality is worse off and it will shatter if its from ebay, but it hasnt yet for me. i've gone >80 over speed bumps, and the worst that has happened for me was some of my flameproof paint was scraped off and a minor indentation.

what about Greddy headers? http://cgi.ebay.com/ebaymotors/GREDD...3020QQtcZphoto

took off my xforce 4-2-1 and installed my jdm 4-1 itr headers today, surprisingly bottom end felt the same but top end was good shit!
ps. anyone wana buy my xforce headers? LOL

You in Brisbane ? hehe

Quote:

---

Originally Posted by preludacris

anybody give some good feedback on fujitsubo headers ?

---

I'm using fujitsubo 4-2-1 in my 90 CRX(b16a1), i like em so much i got Fujitsubo RM01a catback to match and it made a good thing, the best thing!:thumbsup: