Just checked... It is not compatible with our au ecu. Will need to get the USA ecu for it to work. Might have some ecu errors.
Printable View
Just checked... It is not compatible with our au ecu. Will need to get the USA ecu for it to work. Might have some ecu errors.
Correct. You need USDM ecu.Quote:
Originally Posted by 1six8
Just turn off any error with flashpro software
Yeah, I just realised it won't work.. USDM ECU = cost an arm and a leg? :(
altogether should cost about the same as the reflash, and it's resalable.Quote:
Originally Posted by euRo_noob
USDM ECU round about $500 + $800 for flashpro iirc
Recently sold my CU2,Quote:
Originally Posted by Fredoops
So have a near new Injen cold air intake for sale. Pm if interested, looking for quick sale.
Im sure someone needs one on euro group
Thought i put out the words here, looking to sell my newish Blitz Throttle Controller and my Injen CAI. PM if intestered. Selling because looking to sell the euro.
Just wondering
what sort of offset should i order for the below wheels to fit on a stock CU2 Luxury ?
http://www.ebay.com.au/itm/180916538...84.m1423.l2649
http://www.ebay.com.au/itm/271006603...84.m1423.l2649
which one looks better on a Volcano grey?? :p
Personally i think the second looks much better than the first one on a volcano grey vehicle, also the stock cu2 luxury rims have an +55 offset so you should be looking for something like around 35-45, also depending on your tyres also.Quote:
Originally Posted by Soulful
Cheers
HiQuote:
Originally Posted by Ste
I've put 4000kms on mine now and i get 9/100 highest around town and as little as 7.4/100 on the highway. 6sp manual
Silver rims matches really well with volcano grey, unless you are going JDM. Offset wise I think 35+ would be a safer offset for most and don't forget tyres profiles also plays a great role in achieving desired look.
When do u shift?Quote:
Originally Posted by dangerfox
I don't rev the crap out of it much... :)
Usually about 3-4k in 2nd maybe lower the rest.
Quote:
Originally Posted by kelvinator124
thanks guys for the info!Quote:
Originally Posted by nxn75u
I think i should go 19inch for extra $100 bucks!!
http://www.ebay.com.au/itm/180916545...84.m1423.l2649
so based on the info
Front Wheel Size: 19-inches
Front Wheel Width: 8.5-inches
Rear Wheel Size: 19-inches
Rear Wheel Size: 9.5-inches
Stud Pattern: 5x120 PCD
Front Wheel Offset / ET: 35
Rear Wheel Offset / ET: 35
Center Bore: 72.6
this will fit my car with easy??
One question also isnt the euro cu2 have a pcd pattern of 5 x 114.3 not 120? other than that it will fit easily with the right tyresQuote:
Originally Posted by Soulful
cheers
I change at 2 or 7.2 nothing in betweenQuote:
Originally Posted by dangerfox
Natsrs
Any side shoots?
Looks good
Quote:
Originally Posted by Vaku
Are you lowered?Quote:
Originally Posted by Soulful
And the Euro's stud pattern is 5x114.3 not 5x120
Nah complete stock car, so I guess the wheels stud pattern is the main problem assuming they won't be able to customiseQuote:
Originally Posted by euRo_noob
The EZ lip actually looks great!
Good day CU2 seniors. I have just gotten myself a black CU2 JDM E version and wonder if there's anyone willing to help me to ship some OEM accessories over to Singapore? I'm looking for the following,
1) Door styling / Protection trim set
2) Bonnet protector
3) Headlight protector set
4) Luggage Area Protector Tray
5) Sports pedal set
Kindly email me at "horology@rocketmail.com" or PM me if you can help please. Thank you!
Does anybody know if the pre-facelift (08-10) stock grille is interchangeable with the facelift (11-present) stock grille?
Its notQuote:
Originally Posted by power_of_dreams
Cheers
Hi, can the AP 6 potter BBK used on the CL7R be directly bolt onto the CU2? Planning to get a set of Advan RS (18x9 +45 5x114.3) awaiting for Worksop to confirm if the wheels fit. Thank you.
soulful
do you plan on lowering?
i ask because my experience has been that stock wheel size is the best for the car but can go larger if no kit or not lowered
stock lowered isnt hella flush but nice and flush enough imo
Has anybody changed their rear badge over?
Good day to all, I've successfully installed a set of AP BBK (Model 5570) and matched it with 17" Volks TE37SL. Clearance is about 2.5mm. I love the look and next in the pipeline should be lowering the ride. Getting Ray lock and lug nuts, ORO TPMS, Michelin PSS, car alarm and perhaps Blackvue car camera for security reasons.
Wheels- 5 x 114.3 x 7.5j. Offset 40
Tires - 225/45/R17
Big thanks to this forum for all rich information leading to my purchase of CU2 and doing up these mods. Cheers!
http://i91.photobucket.com/albums/k2...1344860337.jpg
http://i91.photobucket.com/albums/k2...810_203356.jpg
Nice brake Set up. How does it drive now?
Bought some mags last week for my 08 Euro S (6 spd)
19" x 8.5" Offset 35 DTM Hiro's
235/35/19 Tyres
Lowered on Cobra Springs (NZ made springs) with 35% tints.
Attachment 22783
Attachment 22782
Thank you for your nice words. 6 pots BBK is gradual and easy to get used to. Braking is more more firm without being too aggressive. Ride on the whole feel more spirited during pick up. Some told me its due to the lighter rims while some say my right foot is going heavier on the pedal. Oh well, I'm a happy driver.Quote:
Originally Posted by nxn75u
Anyone using BC BR Coilovers? Considering...
May i ask if u cud link me to where u got got the rotors?? Or even the size of them?
Hi, I'm from Singapore and got my brake kit from a local workshop.Quote:
Originally Posted by MR_LATE
330mm.
Just wanting to know where i can purchase Air Suspension for my cu2?
Hi, Anyone know where can I fit an after market Head Unit for the standard CU2?
hey denot. Thought you sold your cu2 way back? Did you get one of those gps units from china? If so where and how much?
looks good mate, how much did they set you back?Quote:
Originally Posted by Vineil
How much camber did you have to put on or even any??Quote:
Originally Posted by Vineil
HiQuote:
Originally Posted by nesterjester
Cost me around $2k
Just had a 30mm lowering kit. Just normal camber from that. Have to get a camber kit for it though before it chews up my tyres. Lol.Quote:
Originally Posted by kelvinator124
does anyone know how much does a new rear bumper cost? someone just bumped into me and leave a cracking hole!!
i believe they are around 700 to 900. Maybe bit more. might be more worth it to get the modulo one if you are gonna replace it. Depending on what color your car is, the color difference maybe noticeable especially on the red and white color.Quote:
Originally Posted by Ste
any insurance claim? costed me $500 for the claim and $200 for the sports bumper.
No insurance, too bad. even if with insurance will sure cost me around 600++Quote:
Originally Posted by 1six8
any idea for the modulo how much will it cost?
thanks!!
My passenger front windows got smashed earlier this week at Petersham, not happy anyone know a place that do a good job for tinting in Sydney, all the quotes I've got was around 70-90bucks for one windows, which I think it's a rip off considered someone does th whole car for 150
Howd it get smashed?
Attachment 22925
some scumbag went through all my compartments looking for valuables but I don't have anything in my car either showing or hidden, fail part is the person didn't even find the coin compartment but left me with a $500 bill
Omg :(.
Picking it up Wednesday, what can I buy in terms of small 'mods' because I'm getting anxious. I bought some LED parkers and some white festoons for the dome lights, I just need to keep my excitement down. :p
my experience is to ask around various dealerships first, as they may have new bumpers sitting in their shops that were taken off cars that opt for modulo kits on delivery. If the dealer is reasonable enough, they may sell the whole bumper to you for much cheaper.Quote:
Originally Posted by Ste
Sorry to hear about that. That is F.. annoying. and they did not even take the coins? maybe too F... stupid and probably HURT themselves when trying to smash your glass.Quote:
Originally Posted by Soulful
fck i love that grill
Going to pick my CU2 up today!
Then put a jdm air freshener in it :p
congrats on your purchase! Im sure you'll be getting more of just a JDM fresherner..
Haha I know I know but I gotta control myself and enjoy it stock for a while :)Quote:
Originally Posted by nxn75u
Will post up pics when I get home!
Congrats on the purchase man! What colour did you geT?
(I'm the guy down the road when you and your mates stopped by to have a look at my car hahah)
LOL hey bro! Hope I didn't weird you out too much lolQuote:
Originally Posted by euRo_noob
Got a black one man :)
i've got a spare rear bumper in red if you still need... and a grey front one =s just putting it out there... if anyone interested just pm meQuote:
Originally Posted by Ste
^ Frankenstein?
xD got them off ebay.. thought it might be of use one day lol... got no use for them atm and my car is black....Quote:
Originally Posted by I CU2
Put some visors on
Attachment 23101
They feel really secure so they hopefully won't fall off!
Not the mugen? :pQuote:
Originally Posted by ExpressCoffee
Nah didn't have the spare $350 :pQuote:
Originally Posted by denot
I'm getting my bonnet resprayed this week!
Cool! Show us some pics after!Quote:
Originally Posted by ExpressCoffee
haha will do, i only just bought the thing but the clear coat is cracking in some areas like someone dropped something acidic onto it.. my luck :(
It's just a black respray, or should i do another colour? haha :p
Reckon it'll look really odd just getting the bonnet done?
LOL I thought you are going to plastidip it or something :pQuote:
Originally Posted by ExpressCoffee
My whole bonnet!? Hahaha nah man, that'd look odd... or would it? :o lolQuote:
Originally Posted by denot
u sure the paint is cracking? or it just looks like that? u ran ur finger on it?
yeah the paint is cracking. just think of bat poo that been left too long, but its no bat shit its batman!Quote:
Originally Posted by roony
Haha yeah, I'm actually starting to think it's that now.. Poop that wasn't cleaned and left there for a while... why didn't I see it when I bought the car! :(Quote:
Originally Posted by MR_LATE
It's only about a $300 fix so shouldn't be too bad...
Anyone one here seen much rear bumper diffusers for our CU2s? I remember posting a few up a while back.
i'm thinking of getting these led drl and fit them next to the foglights for the CU2 (similar location to the BRZ drl) .. any opinion?
http://www.powerbulbs.com/au/product...lights-kit-drl
i measured there should be enough space of 12cm wide..
Hey guys,
quick question... We're thinking of installing a double din head unit on my bro CU2 and leather seats as well (base model)
Anyone know a good place (and not expensive) to do this around Sydney area?
Cheers
Does anyone have an updated price list or something along the line for Modulo parts?
Any good places to get genuine goodies? lol
Excited to pick up my new Euro in November
anyone interested in a set of eibach springs?
hey mate let us know how much the retrim costs! always curious... oh and did you get your double din kit from Honda?Quote:
Originally Posted by denot
Because I know the guys over in the states have a genuine honda part thats a double din for our cars.
how muchie?Quote:
Originally Posted by anpig
Hi mate, sorry but I havent pursuit it further... the cu2 is my bro's now. I'm just helping him to get some info. but I'll ask if he found a place yet.Quote:
Originally Posted by nesterjester
Man i wouldn't mind an aftermarket double din for the cu2 as well :/
would like to change my wheels and interested in this stance http://img141.imageshack.us/img141/9...sc5blkmach.jpg
the min offset is +35
and i would like to have 19/20x8.5(front) 19/20x9.5(rear)
can i use this in my cu2? and do i have to change my springs?
any recon is good.
do you guys think this can fit?
http://www.wheelfire.com/scontent/Wh...907&CheckFit=1
thanks :)