all the other coils ive had dont compare to these in terms of quality...but these are definitly stiffer! lolQuote:
Originally Posted by tripleuse
Printable View
all the other coils ive had dont compare to these in terms of quality...but these are definitly stiffer! lolQuote:
Originally Posted by tripleuse
what spring rate and how much did you pay?Quote:
Originally Posted by Type FN
spring rate 18k front 16k rear, pm and ill tell you how much.Quote:
Originally Posted by tripleuse
my dream shock/spring setup.
Take my old ones off Duy Mr Lazy. I miss mine dearly :(
Changed my spark plugs last night as my old ones were almost fouled. And cleaned it up for the buyer!
https://fbcdn-sphotos-b-a.akamaihd.n...41088697_o.jpg
getting closer. audio master pope recommended me to run 0AWG. I ran 4AWG instead because he likes K motors.
https://dl.dropboxusercontent.com/u/...2018.47.22.jpg
https://dl.dropboxusercontent.com/u/...2018.48.55.jpg
Looks tidy hey...Quote:
Originally Posted by ivseenwars
Car pager. Found out it's literally a mobile in a case.
https://dl.dropboxusercontent.com/u/...2008.30.54.jpg
Cousin's B20 he's working on.
https://dl.dropboxusercontent.com/u/...2010.13.39.jpg
New nulon product, replacement for OEM Honda blue coolant.
https://dl.dropboxusercontent.com/u/...2011.21.04.jpg
100k service for dc2r
https://dl.dropboxusercontent.com/u/...2012.48.12.jpg
Dangerous
https://dl.dropboxusercontent.com/u/...2014.58.50.jpg
Better
https://dl.dropboxusercontent.com/u/...2015.50.57.jpg
Bau have you ever used a Gates timing belt on B series before? I'm pretty certain they have the wrong number of teeth as they have one belt to suit B16 and B18.
Adrian advised me not to use them for this reason, and there was a guy here on OH who had to get a different belt because the timing just wouldn't line up.
Just a heads up for you bro, wouldn't want you to get half way into the job only to need another belt.
Cousin using gates on b20
Gates on c2
Should be fine aye
Ah ok then. Should be fine if it's the same as the one on your C2. Maybe they fixed the problem and make 2 separate belts for B16/B18 now.Quote:
Originally Posted by cbauto
how much was the Nulon Coolant ??
Ive been running a gates belt for 2,000km, so far so good.Quote:
Originally Posted by Super-DA9
44from Mekong.Quote:
Originally Posted by spn.fed
Makes 10 liters.
I bought Honda coolant, 110 for 10 liters.
Lol
honda coolant gaming. 5L not enough
Nulon is pretty good shit. I used to use 10w40 Gold on my b series. Bang for buck and not crap shit.
+1 Nulon 10-40 full syn is great
One of my friends found the same thing in her DC2Quote:
Originally Posted by cbauto
https://fbcdn-sphotos-d-a.akamaihd.n...05392318_o.jpg
Hi Pete. Small world aye.Quote:
Originally Posted by Setanta
Why no oem :(
Cause I always wanted a Cwest lip kit :)Quote:
Originally Posted by Vvvtec
Looks cool man
But uhh, that wing, not really sure what to say about it haha
Gotta see it in person :) lol.Quote:
Originally Posted by Super-DA9
Nice supraQuote:
Originally Posted by Cartoon
dats a fully sick hectic wing brah
bet it pulls dem bitches hard
I actually don't know if your joking or trying to insult!Quote:
Originally Posted by PHO
Na just a little down force for wakie cause I actually track :)Quote:
Originally Posted by bubbakush
I like it man...
Props to doing wat u want and wat u like...not following a trend...
Love it heaps
Thanks mate I have always liked the Cwest lip kit and wing when they are together. It's very mid 90's jap that I like and in all for doing what u want to your car. It's yours so why do what others like :)Quote:
Originally Posted by IEVAQ8
What's the wd40 for?
To assist with the installation of the exhaust hangers. One was toasted.Quote:
Originally Posted by cbauto
Ahhhh.
Pm cartoon auto
i think some people are hating on your spoiler because a taiwanese factory aren't making cheap enough knock offs yet..
It is a true jdm kit :)Quote:
Originally Posted by Bodgy Racing Developments
6000K H.I.Ds installed http://img.tapatalk.com/d/13/10/25/2ede7yma.jpg
Also got given some pioneer 6" 160w speakers for free from the tow yard at work. Yay for free mods.
http://img.tapatalk.com/d/13/10/25/vyda2u2a.jpg
Got a sticker(+10kw) [IMG]http://img31.imageshack.us/img31/1198/r0n0.jpg
How is that illest with mexi spec wheels?
what spec wheels do i need ?i got 15x8 zero offset atmQuote:
Originally Posted by newpaddy3
yuk bro looks shit
haha i dont give a shit eat a dickQuote:
Originally Posted by u mad?
thanks a lot now i understand should get some camber
lol why would you do that to your car?Quote:
Originally Posted by vtach
Couldn't you have researched what people have done in the past to get a better idea?
Is it even legal? If the top of the tread even goes past the fender a bee's dick width they'll defect you for it.
Fitted carbon ducts today. Had to mod them a bit thanks to the front lip.
http://img.tapatalk.com/d/13/10/25/9eqyvu4u.jpghttp://img.tapatalk.com/d/13/10/25/gery3y5e.jpg
haha its 100% illegal, i like this look for now i might get better lighter wheels when i have cash
what wheelsQuote:
Originally Posted by vtach
Why do so many people buy wheels that DON'T fit their cars. The scraping of the wheel hitting the guard, having to go with skinny tyres, the cop attention and defects.. is it worth it somehow?? No offense vtach, I just don't understand.
That carbon intake looks mad, Cartoon. it's a shame that one cant have that sort of thing on the AUDM front without removing the indicators lol.
inb4 rota
they are 15x8 widened steelies zero offset
cool got any more shots of fitment?Quote:
Originally Posted by vtach
Even though i get minimal scraping you got a point they are a drainer to drive with, i just like how they look everyone has a different viewsQuote:
Originally Posted by Super-DA9
ill get some up tomorrowQuote:
Originally Posted by ctx
http://www.ozhonda.com/forum/customa...ar28992_21.gifQuote:
Originally Posted by vtach
nice man
great racing style
custom harness bar/c pillar w sabelt 4 point.
http://i1282.photobucket.com/albums/...ps66fa411b.jpg
https://fbcdn-sphotos-b-a.akamaihd.n...87596090_n.jpg
got my mugen :D
I will never understand name brand exhausts.
It's just metal piping.
It's to get a particular sound. A lot of work goes into making the exhaust sound the way it does. But performance-wise yes it is basically no different from any other 2.5" mandrel bent pipe.Quote:
Originally Posted by newpaddy3
you're paying for the name
would you rather say
'got my MUGEN twin loop'
compared to:
'got my XFORCE twin loop'.
inb4 myek9
Who actually gives a ****? Lol. I wanted a mugen so I got a mugen.Quote:
Originally Posted by carayan
it sounds gay when u say mugen irl
lol i prefer spending double price on a branded exhaust then a made in china piece of sheet imo.
Good on ya. Fk what others say!Quote:
Originally Posted by ivseenwars
I love the mugen exhaust but in my older age I would rather spend the cash on an xforce with more money for suspension up grades. Then again I am running an original c west lip kit so I can't talk
Ive done my suspension upgrades for now :PQuote:
Originally Posted by Cartoon
Was impatient and decided to just install it on my driveway.. took me a little longer but was worth it haha. Need some gaskets but.
https://fbcdn-sphotos-f-a.akamaihd.n...25472357_n.jpg
I learnt the hard way
Had a custom exhaust (2.5") made - got raspy over time and louder
So i bought another muffler (xforce brand twin loop) even worse
Bought fujitsubu and wish i got it sooner not wasted money on the previous.
Looks sick dude, bet it sounds good too. I'm happy with my Mugen system too for what I paid. :thumbsup:Quote:
Originally Posted by ivseenwars
http://img.tapatalk.com/d/13/11/02/yga8uzen.jpg Better shot of the wing for the boys who love it so much
I remember when i had a mugen twinloop on my old b18 setup, was so quiet but sounded so good.
Give me yo advan wheels pls :P
doesnt look that bad imo
I like the kit, not a massive fan of the wing, but hey, if we all had the same taste the car modding scene would be pretty fuking boring.
Pretty sure catback to cat is leaking, can see heat/bit of smoke coming from just there and its wayy to loud for a twinloop! gonna grab some fresh gaskets asapQuote:
Originally Posted by Super-DA9
weren;'t you selling the car?
Lowballers galore gave up n took it off the market to keep working on it.Quote:
Originally Posted by carayan
No more s2k?
All depends on the product, all made in China isn't a POS. Exorst can be Jap, OZ or US designed and be made well in a well-controlled Chinese factory. They then pass the slavings on to you. Making an exhaust is not total rocket science and the best will not outperform the worst by any large difference, and with the minimal bang for buck gains to be had on an NA Honda its not always worth it. A JDM exhaust will retain its value better come resale time, but the saved money on a cheaper exhaust (and you can always get a branded JDM muffler) can be used elsewhere on the car, as others have said.Quote:
Originally Posted by Evok