EP3 Type R

Printable View

Show 80 post(s) from this thread on one page

14-05-2008, 11:46 AM
sai_ANN

Quote:

Originally Posted by Philip Lee

i have been running around trying to get a spare key cut.

my car has the OEM immobilisor and all the places i went to can't program the key for me. i wonder how much it will cost at Honda dealer....

anyone has any advise?

in a way it's good that nobody can make a spare key easily but on the other hand it's a PITA.

i had to do that with my old car...you're looking at 150-200 for the dealer to program the key...
14-05-2008, 12:10 PM
Philip Lee

Quote:

Originally Posted by sai_ANN

i had to do that with my old car...you're looking at 150-200 for the dealer to program the key...

including the key or extra?
14-05-2008, 12:22 PM
sai_ANN

Quote:

Originally Posted by Philip Lee

including the key or extra?

that was not including the key...the key cost me an extra 80-100 from memory... X(
14-05-2008, 01:15 PM
Philip Lee

Quote:

Originally Posted by santa3563

You can get the key,cut and programmed at PREDDEY'S LOCKSMITH in Kingsway,MIRANDA for about $130.

thanks man but i'm in Brisbane......
14-05-2008, 07:45 PM
typercivic

i picked up some front 4 point under body bracing today to go with rear bar so it will be interesting to see how it affects things. also got a fuji rm-01 exhaust on order atm along with some suspension work. can't wait
14-05-2008, 08:10 PM
lukits01

Quote:

Originally Posted by typercivic

i picked up some front 4 point under body bracing today to go with rear bar so it will be interesting to see how it affects things. also got a fuji rm-01 exhaust on order atm along with some suspension work. can't wait

what suspension did you got for, mate?
14-05-2008, 08:47 PM
micka

I have heard rumours that you're not able to have additional remotes for unlocking car programmed by Honda dealers in Aust because they use different equipment to Japan, and you're not able to have one made without the car present, thus you can't have one sent from Japan programmed. Is there any truth to this, or have people been able to have remotes programmed?
14-05-2008, 10:17 PM
p3p5y

Quote:

Originally Posted by micka

I have heard rumours that you're not able to have additional remotes for unlocking car programmed by Honda dealers in Aust because they use different equipment to Japan, and you're not able to have one made without the car present, thus you can't have one sent from Japan programmed. Is there any truth to this, or have people been able to have remotes programmed?

I re-programmed my own remote successfully using these steps on a spare Australian Honda Remote I had.
https://techinfo.honda.com/rjanisis/...U/AAM32043.pdf
14-05-2008, 11:18 PM
typercivic

Quote:

Originally Posted by lukits01

what suspension did you got for, mate?

just some springs at the moment as getting for next to nothing then will get some coilovers down the track some time.
15-05-2008, 09:52 AM
Philip Lee

Quote:

Originally Posted by p3p5y

I re-programmed my own remote successfully using these steps on a spare Australian Honda Remote I had.
https://techinfo.honda.com/rjanisis/...U/AAM32043.pdf

cool, will give it a try as i have a spare JDM remote given as a "surprise gift" by the Japanese auction place......
15-05-2008, 03:21 PM
typercivic

how do you guys think a set of 7.5" wide and +50 offset wheels will sit on an ep3 considering stock is 7" and +45?
15-05-2008, 04:06 PM
Chi

Quote:

Originally Posted by typercivic

how do you guys think a set of 7.5" wide and +50 offset wheels will sit on an ep3 considering stock is 7" and +45?

WIll sit fine stock.

When you lower it more it will scrub the inner guards and chasis on full lock turning.

Even with camber itll still scrub.

Usualyl when u get wider wheels u should get more aggressive offsets.

Show 80 post(s) from this thread on one page