[CL9] Low offset wheels

i know its a big ask but....will 18x8 +25 front and back fit? with rolled guards?

^^ wont fit for sure...unless you are running less (more negative) camber than -3.5 in front, and around -4 in the rear..added that with all guards rolled, shaved, bumper mounts shaved and redrilled for new mounts, inner plastic cut, and also you gotta run at least 195 tyres to make it stretched..ask Tranz LOL he is having the same width and offset in the rear..he is running 215 tyes and they still rubs.

I am running +22 offset atm. 18x7.5
all guards and rear bumper works are as said above. They rubs sometimes in the rear..But front rubs like 3-4 times a day. However I am not running stretched tyres though, they are 225 on 7.5.

does anyone know if 19 x 8.5" +40 and 19 x 9.5" +42. will fit on the euro?

Also anyone in Australia running work vs-xx's?

^that will fit if you roll guards, run 225/35 tires, negative camber in the rear.
felixd is running vs-xx on his euro.

thanks kit so cant fit 235s on the back at all?

my old specs:
19x8.5f and 9.5r. +41 all round. I was running 235 tires all round too.
235's can be fitted but you gotta do more fender/camber job. It depends on your ride height too. I had rear control arms cut off one inch and rewelded to move the rear wheels forwards a bit to prevent them from rubbing. 225 even though is not safe to do would give it more stretched and give it more clearance. Running -3 camber or less would be bad for your tires though.

Quote:

---

Originally Posted by tenji`

does anyone know if 19 x 8.5" +40 and 19 x 9.5" +42. will fit on the euro?

Also anyone in Australia running work vs-xx's?

---

Yep dats wot i've got at the moment..17x7.5 ET41 front and 17x8.5 ET41 rear.

I'm only lowered by 25mm so very little to no rubbing at all..

I am running +22 offset atm. 18x7.5
all guards and rear bumper works are as said above. They rubs sometimes in the rear..But front rubs like 3-4 times a day. However I am not running stretched tyres though, they are 225 on 7.5.[/QUOTE]

Thanks Kit, will trial fit the wheels tmr.

Quote:

---

Originally Posted by tenji`

does anyone know if 19 x 8.5" +40 and 19 x 9.5" +42. will fit on the euro?

Also anyone in Australia running work vs-xx's?

---

Should be ok, my iForged rims was 19x8.5 +40 & 19x9.5 +35. The front might rub though. felixd using VS-XX.

thanks dan looks like ill be going the works then...

^what boss says.. hhehe

yah im using vs xx offset +38 rubber 225/40/18