[Discussion] Wheel Spacers.... Different types, pros and cons, safety, and legality

Quote:

---

Originally Posted by nigs

17's are sick aye. Don't get smaller wheels, bitches don't like that.
Get the spacers right. Make sure Rim and/or sidewall hang out of your guard. Then run next to no negative camber and near stock height to correct the Mexican fitment. Then say BECAUSE STREET CAR. But you gotta rep the fack out of it like it was the shiz nizz.

---

LOL is 15 mm good? and i realise asking this without giving offset or any details is kinda useless but,
http://www.justjap.com/store/product...27&cat=&page=1 any good?

depends on the wheel size and offset man, u cant really base that +15mm is good without any other measurements lol, its like tryna build a house with no blue prints

Quote:

---

Originally Posted by mugen_ctr

depends on the wheel size and offset man, u cant really base that +15mm is good without any other measurements lol, its like tryna build a house with no blue prints

---

LOL i know but i really cant be effed taking my wheel off im pretty sure its 42 offset and wheels are 205 45 17

there is no scrubbing on the outer guard just on the metal on the inside.....

depends how low you are and what sort of negative camber you're dealing with
+15's a fairly big jump

pretty useless without knowing the width of the wheel too

Quote:

---

Originally Posted by unl3a5h

cant be effed taking my wheel off

---

new gen modifiers.

Assuming you have an ek, those spacers are the wrong pcd, wrong pitch, and most likely wrong hub size. They won't work.

Quote:

---

Originally Posted by Bludger

new gen modifiers.

---

lol i come back from work effed up i took my wheel off to check the offset not long ago pretty sure its 42.

can somebody reccommend some good spacers to use i dont have a camber kit its just standard on teg vtir front shocks and springs so tiny bit lower than standard i just want to be able to take any corner with a bit of speed without rubbing it does my head in

where is it rubbing??

also how wide are your rims

the rubbing is on the inner guard the metal is rubbed off and you can see the metal not the rough black paint stuff, im not sure how wide my rims are. the tyres are 205 how do i find out about the rims :S