Best Cam Upgrade for a B18c2?

Nice work mate!

That is probably the extent that I'd like to go to with modding my car. 131kw atw is very very respectable!

thanks man.
im doin a hi comp b20 bottom end about april next year with a hondata s300 and a new catback. i should also point out that those power figures were made with the standard audm dc2 cat converter that has done 180,000 kms lol. so atm the exhaust is killing the power of the car, i recond with a fugitsubo or another similar brand catback and a hi flow ill ad about 5-10kw easily

Just found this,
Not sure if this helps anyone with anything

Quote:

---

Originally Posted by hondar

Stock Integra Vtir/gsr cams (made of chilled cast core)
Intake lift - 10.6mm, duration is 230 degree @ 1mm
Exhaust lift - 9.mm, duration is 227 degree @ 1mm

ITR cams (made of chilled cast core)
Intake lift - 11.5mm, duration is 240 degree @ 1mm
Exhaust lift - 10.5mm, duration is 235 degree @ 1mm

CTR cams (made of chilled cast core)
Intake lift - 11.5mm, duration is 243 degree @ 1mm
Exhaust lift - 10.5mm, duration is 235 degree @ 1mm

Toda A cams
Intake lift - 11.6mm, duration is 250 degree @ 1mm
Exhaust lift - 11.2mm, duration is 240 degree @ 1mm

Toda B cams
Intake lift - 12mm, duration is 255 degree @ 1mm
Exhaust lift - 12mm, duration is 245 degree @ 1mm

Toda C cams
Intake lift - 12.5mm, duration is 255 degree @ 1mm
Exhaust lift - 12.5mm, duration is 255 degree @ 1mm

Spoon cams
Intake lift - 11.54mm, duration is 256 degree @ 1mm
Exhaust lift - 11.13mm, duration is 245 degree @ 1mm

---

link to the thread is here
http://www.ozhonda.com/forum/showthr...hlight=cam+set