yeah I Got the Calibration of the tune map
Printable View
yeah I Got the Calibration of the tune map
Please post it up so we can suss out your map.
More specifically, so Adrian can check it out :D
K how u upload be trying not working
K GOT IT download from here http://uploadingit.com/file/view/ix5...cam%20tune.kal
Gosh... where to start...
Overrun cut is set incorrectly
Vtec unlikely to work correctly – atmospheric pressure is 100 kpa, your overrun cut activates under 200kpa ? Unsure of actual effect but it is wrong
Closed loop is turned off ? Why?
Injector size is listed as 280, your injectors are 310 & there is a 5% trim applied to the fuel. – Odd…
Gear ratios are wrong & gear comps & tip-in all zero ? Why ?
IACV is disabled? Why ?
Ignition water temp comp tables are zeroed? Why ?
Same with air temp comp tables ? Why ?
Knock sensor turned off ? Why ?
Incorrect base calibration used (PRA Euro CTR) this is why your tuner couldn’t get the O2 sensor to work & turned it off
No launch control
8100rpm rev limit ?
Ignition timing tables are odd to say the least
Fuel looks normal ish
Cam angle tables are also odd
So, I'd say go back & talk to your tuner about this & see what he can do.
wow lol I wont know wat to say to the tuner that alot of problem
Just say you're not happy like you did in your 1st post & you got a 2nd opinion & you have the following concerns... (print the above post)
Be nice about it, don't lose your shit & you'll probably get a really good result :)
hope that helps
ok then Thanks For your help
What it shows me is someone with no idea how to tune a Kpro but had no problem taking his money for a half arse attempt at making themselfs look good.
can u guys have a look at mine? byp tunned it, i know its terrible
http://api.viglink.com/api/click?for...aloghghghghggh
thats my data log^
thtas my cal v
http://api.viglink.com/api/click?for...13791283208508
Can this post get a sticky?
Lots of good info