Accord Euro Mods

Hey there, just wondering the Hankook tyres... whre they noisy, i had the nankang NS2 and they seems abit noisy...

Quote:

---

Originally Posted by stephen8512

ahhhh how i miss my euro.... when she was in her prime i had..


INTERIOR:

- Factory Leather Trim
- S2000 Titanium Shift Knob
- Euro R Pedals
- All interior light changed to white LED


EXTERIOR:

- Debadged "Accord" and "Euro"
- Euro R Matching Colour Hood Trim
- Mugen Front Bar
- Mugen Sideskirts
- Mugen Rear Bar
- Mugen Spoiler
- 15% Black Tints
- 35% Black Tint Film on Front and Rear lights
- RAYBRIG white LED parkers
- Philips Diamond Vision 5000K Hi beams



ROLLIN' ON:

- 20" AME Modelart Chrome
* Front - 20x8.5
* Rear - 20x8.5
- Hankook Ventus V4 ES
* Front - 225/30Z/R20
* Rear - 225/30Z/R20


STOPPIN' ON:

- ENDLESS Brake Pads
- DBA 4000 Rotors
- APP Steel Brake Lines


SUSPENSION:

- Tein Type Flex with EDFC Controller
* Front - lowered 3 inches
* Rear - lowered 2.5 inches
- Cusco Type OS Front Strut Brace
- Cusco Type I Lower Arm Brace
- SWIFT rear sway bar


ENGINE/PERFORMANCE:

- Optima Yellow Top Battery
- Exedy Hyper Single Clutch
- PIVOT RAIZIN Volt Stabilizer
- Injen CAI with K&N Filter
- Maxim Works 4-2-1 Headers
- Greddy EVO2 Catback Exhaust
- CL7 Euro R Cat
- Spoon Short Shifter
- Spoon socks
- Mugen Oil Cap
- Mugen Radiator Cap
- I-Vtec cover painted in Candy Blue
- Spark plug cover painted in Candy Blue


http://i7.photobucket.com/albums/y29...8512/Euro1.jpg

http://i7.photobucket.com/albums/y29...2/IMG_0476.jpg

http://i7.photobucket.com/albums/y29...2/IMG_0533.jpg

http://i7.photobucket.com/albums/y29...2/N78342-1.jpg

http://i7.photobucket.com/albums/y29...enKit-09-1.jpg

http://i7.photobucket.com/albums/y29...2/SP_A0055.jpg

http://i7.photobucket.com/albums/y29...512/1234-2.jpg

http://i7.photobucket.com/albums/y29...8512/123-3.jpg

http://i7.photobucket.com/albums/y29...512/123456.jpg

http://i7.photobucket.com/albums/y29...8512/12445.jpg

http://i7.photobucket.com/albums/y29...2/IMGP2125.jpg

http://i7.photobucket.com/albums/y29...IMGP2123-1.jpg

---

Hey Crapdaz, any reason why the bodykit is sitting in ur room n not on the car???

Mods.
Lightweight 18 inch Speedy Vertec VR5 Rims
Eibach ProKit
HKS Silent Hi Power Catback Exhaust System
18mm Whiteline Rear Sway Bar
UNORTHODOX RACING Underdrive Pulley (Ultra SS)
Gates Pulley Belt (V-Micro Ribbed Serpentine Belt - K070683)
MOMO Gearshift Knob – Sphere Black Leather/Chrome
MOMO Gearshift Boot
Endless Brake Pads (Front and Rear)
Injen Cold Air Intake with MR Tech (Polished)
Injen Hydro Shield (Black)
Black Security Window Tint
Ingalls Rear Camber Kit

Quote:

---

Originally Posted by Miz_II_Die_IV

Hey Crapdaz, any reason why the bodykit is sitting in ur room n not on the car???

---

am going to get my mate to do it for me, his going to move workshops soon (waiting on council approval), but i'll see if he can book me in sometime to begin the install.

Quote:

---

Originally Posted by Crapdaz

am going to get my mate to do it for me, his going to move workshops soon (waiting on council approval), but i'll see if he can book me in sometime to begin the install.

---

Well looks like your car won't look bone stock soon.. hehe

K&N Air Filter
Tein SS
Endless Break Pads
Weds SA-70
6000K HID
Front Focal Splits, Rear Focal 3 Ways, Powered with PHD 4x75 RMS
JL Audio Sub W3 Powered with JL Audio Amp.

I think thats all it is.

request for sticky for this thread ;)

First Mod: Insert Talented and Humorous Ace Steerer Behind wheel - Check!

The Rest:
Tein SS Coilovers
Whiteline RSB
Euro-R Front Grill
Comptech Ice Box with K&N Filter
Topspeed Stainless Steel Quality Premium Race SuperDooPa Header
300 Cell Ceramic Cat
Endless Brake Pads ( Spell it right damnit!)
Skunk2 extra hot and sometimes freezing Gear KnOB
Jtune Mild Flash - Vtec at 5000rpm and other goodness that mostly in my head
18 x 7 Speedy Lite gold Alloys with GForce tyers ( yes the same tyres as the Phoenix in Gforce (Tm) Tv Show


Some other shit i forget or havent installed like a Hondata Heatshield Gasket..but I digress..

Performance
UR pulley kit
Ingalls Engine Torque Damper
Mugen Short Shifter Assembly
AEM SRI/CAI w/ Injen Hydroshield (Removed) to K&N Apollo CIS
P2R + Hondata IM Gasket + TB gasket
DCSports Header
Random Tech Catalytic Convertor 200cell
5zigen Pro Racer Catback Exhaust 2.5"
K20 (RBC) Intake Manifold

Suspension
Ingalls Rear Camber Kit
Moogs Endlinks
Tein MFP Coilovers + EDFC
Progress RSB
Cusco Front Strut Tower Bar Type OS
Cusco Lower Arm Bar Type I

Wheels/Brakes
Hawk Brake Pads
Powerslot (Slotted) Rotors
RAYS Gramlights 57 Maximum TA 18x7.5 +43
5zigen Pro Racer Gunmetal Lugs
Dunlop SP Sport Maxx 225/40/18

Miscellaneous
Custom, earth terminal w/ 4G cables
Spoon Socks
Mugen Oil Cap (Red)
Pivot Raizin Earthing Stabilizer Kit
Sparco Globe Gearknob
Cusco Oil Catch Can
Alpine HU CDA-9884E
Tint (18%)
LED (parkers/rego/boot/courtesy door/maplight/rear cabin)
K&N Oil Filter

To be done
Luckstar or Raven Bodykit
Greddy Emanage Ultimate w/ Boomslang Harness

ppl with brake upgrades, how are they holding up, any signs of warpage or shaking of steeling wheel etc etc haha
just wondering as im currently in the act of saving for an upgrade of brakes haha

hmmmm i think i need to start typing up my list now... hopefully itll be finished by the time i get my head fitted :p hehehe

damn crapdaz! i didnt realise ud done so much to yours! :thumbsup::thumbsup:

nah mate nothing as much as yours, internal stuff like head and IM etc.

your list is going to be loooooooooooooooooooooooooooong.