Printable View
Hmm... asked ppl around me and noone can figure out what that LCD is showing. Any ideas?Quote:
Originally Posted by Civic^^
I still think that the RPM on the right is unnecessary.
As for grille.. you need to double side tape it for sure. I used masking tape as planning to use the screw to secure it. The upper clips won't be enough.
thx for ur opinion, i know what to do know, and i missing a extremely small phillips screwdriver as u guys mention b4, i will get one today from auto shop.
Bingo, i got it from SG car styling, and i ordered come with painted in blk(due to i am lazy). See how's going once i got a extremely small phillips screwdriver, then i can set it up. but i think the painting quality just so so.Quote:
Originally Posted by Jo_e
Do they come in our oz bluish colour?Quote:
Originally Posted by dyljoy
PS: can I get the link of this SG car styling (again)?
thanks...
hey guys, want to know your comments about this:
http://cgi.ebay.com.au/Honda-Civic-0...QQcmdZViewItem
thanks
[QUOTE=PS: can I get the link of this SG car styling (again)?
thanks...[/QUOTE]
Here you go:
http://www.sgcarstyling.com
I think this item is good for improve the HP, but i have no idea its price is reasonable or not, hope someone here try it and tell us how about itQuote:
Originally Posted by denot
I'm installing the bodykit today.. will see how it goes.. it's a copy one.. I did the front one.. fits perfectly.. nice and tight.. and I made couple scratches on the front bumper.. :P
U got Moudle or Mugen one? how can u stick on it? use few screwds? need pic, bro
yer this was the one i saw on ebay i was talking about... http://cgi.ebay.com.au/05-06-Honda-8...QQcmdZViewItem
wonder if it is worth getting? and why dosen't it have the mugen emblem in on the grille? (fear of getting sued?) lol
will post this weekend.. if I can make it.. too much things goes around..
mugen style... use couple screws.. even without the screws.. I don't think I can pull apart the front one.. sits too tight.. but there's no gap at all side by side
Quote:
Originally Posted by dyljoy
I got pro to take off the OEM front grill, when i remove the 2 screwds from the grill, i found it still get other 4 clips stick on the bumper, and they are not easy to take off, thinking if i cut the clips off, can i get new clips from Honda...if can, i will cut them off rather than take too much time on it
price is ok, about standard for what it is. i doubt its cf tho. these things are a bitch to install tho, from wat i gather on the us sitesQuote:
Originally Posted by dyljoy
U think i can install it on my auto? will it makes any different?Quote:
Originally Posted by xenfacta
well i know for sure that they are Defi Gauges. From what i can see the one starting from the far left is intake manifold pressure then oil temp then oil pressure.Quote:
Originally Posted by JaCe
http://www.nippon-seiki.co.jp/defish...es/df04905.jpghttp://www.nippon-seiki.co.jp/defish...es/df04605.jpghttp://www.nippon-seiki.co.jp/defish...es/df04405.jpg
Finally i fitted in the front grill, not too bad, let's have a look~
pic1:
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
pic2:
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
can anybody give me a rough estimate on how much they paid for their front grille?
in my case, i ordered from oversea(Singaport), it cost around 160 AUD include shipping fee from there, mine come with painted.
that car sure looks hotttttt!!
love the advan windscreen sticker !!!!.
velee nice.
thx, i will make my car look much more sporty later once i get the bodikit
Looking good Joy:thumbsup:
thx~ray~
I meant the LCD on the wheel- turns out that it's a voltage stabilizer... they are extremely popular here in Singapore, I noticed every shop sells them. The basic model is just a meter (can't stabilize) and is only around $60aud (plugs into cig lighter too if you're too lazy to install properly).
As for grille- that looks hot. I also bought a new grille from Singapore which is much better quality than the last one. Cost me around $90aud and came prepainted in black.
cool, show us once u put it on ur car. and i did the first 1k service today from honda, and found i can buy the clip which i broken when i take off the orginal front grill, they cost around $2.8 each, it is exp but at least i would no worry about once i break them in the future, hoho
btw guys, have any of u know about this "factory upgrade"?
http://www.honda.com.au/wps/wcm/conn...t+lighting+set
kinda cool... is it not?
ya, and it costs around 300 AUD if i am not wrong
ya...i have them...costed me 260 bucks...but they look very sexy...
I saw it in the honda original accessories brochure but it didn't appeal to me (knowing it'd be expensive)!
As for mods, I'm also planning to install my K&N filter soon (bought it in malaysia). Got a new black grille which I have to cut mesh for as well.
show us when u done all the stuffs
btw, I may get double din dash panel from SG later, just waitting for the reply~
You reckon I can get the brackets to hold the HU separately? and also the small glove box beneath? I'm desperately looking for 'em...
Quote:
Originally Posted by dyljoy
are there any other bodykits around except for the mugen one? it's so freaking expensive but it looks great none the less!
Modulo.. in here.. you can get 'em from Honda.. looks betta IMOQuote:
Originally Posted by dannybubu
nice...you got any pics or anything? and you know how much roughly for the kit?Quote:
Originally Posted by Aco3n
if get from honda, it costs around 2.2k i think
i got quote from austral $1700 fitted without the rear spoiler
1700.. worth to spent I guess
hmm i got quoted 2.6g.... but this was when the civic first came out back in april :p
yer if u can get it go for it cos the quality should be great (being a genuie honda item).
so can you order it straight from the honda dealer? or should i go through ozhonda?? like the mugen kit? and which you reckon looks better?
yes u can order it from the honda dealer and they will fit it for you. The advantages from fitted by Honda are that they will probably offer you some sort of warranty (eg. don't expect them to replace ur front spoiler if u totally destroy it :p )Quote:
Originally Posted by dannybubu
which one looks better? well imo go the mugen kit cos it looks more aggressive. but if u a peace of mind, go the honda kit. or maybe even a bit of mix and match? intresting to see how that will turn out:D
mmm does that mean the modulo kit is the one that you can get as an accessory? coz last time i looked in that book...it didn't look anything much...i reckon the mugen is better... hehehe anyways i found these pedals on ebay...
http://cgi.ebay.com.au/ws/eBayISAPI....ayphotohosting
just wondering if they're real mugen...coz i like'em! :D
looks ok, but price is to exp~
yer the OEM bodykit in Aus i belive is not the modulo bodykit. it consists of a front lip, side skirts, rear lip and a cute tiny little wing :p
The OEM bodykit looks pretty good (in real life) cos they (Honda) showed me what they looked like on the civics to convice me to get them lol :p
im not 100% sure but where did the modulo bodykit come from>? malaysia or singapore? or thailand?
NIIIIIIIICCCCEEEEEE DyljoY!!
didnt see your car so long. n its changed. matured
Anyone put after market seats in yet?
nah not yet...at least wear out the stock ones a bit first! hahaha
hi, TurBIce, nice to meet u here, how about ur car? ya, i did some mod on my car atm, and will lower it and put the mugen kit on to make it nicer~Quote:
Originally Posted by TurBIce
theyd want to be for the price. anyone else know where to find pedals for the fd1?Quote:
Originally Posted by dannybubu
what does OEM stand for?
sorry, that's mean real one,hoho
sorry, that's mean real one,hoho
Original Equipment Manufacturer.Quote:
Originally Posted by dannybubu
I'm more used to seeing it in the "computer" context- as in, stuff included with a PC by the PC maker.
I've been under the impression that Modulo IS the Honda kit which is sold at dealers- not sure how I got this impression though. But from memory, comparing the pics in the Honda OEM Accessories brochure with the Modulo pics off the web, the two kits looked very similar!Quote:
Originally Posted by Bob san
Back to the topic of 06 Civic mods, has anyone installed the K&N filter yet? If so, please refer to http://www.ozhonda.com/forum/showthread.php?t=57796 .... I'm looking for any tips/advice before I go ahead and muck about, trying to figure out where the air filter is, how to install it, etc...
hi, just did some update on my mod list of my 06 civic, here there is:
Genuine US ver Integra Type S shift knob,
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
And X-force S10 mugen style 2.5" exhaust, can't affort the price for mugen one for 06 civic, and this one not bad, looks great, i like it~
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
http://im1.shutterfly.com/procserv/4...0Abt2TJi4bs2JA
N e one in syd with original mugen kit wanna show me:)
SExy car btw Dyl
nice exhaust dyljoy~ its peter btw from msn.
how does it sound? feel any difference performance wise?
thx Peter, basicaly this type exhasut not too loud when u doing the normal driving, but it will sound a lil diff when u put the car harder(it sounds deep and sweet). it seems gain a bit better power, no matter in low rev range or even higher, not bad choice to get it, thx again to Trav who from Undergroundimports to give my baby such great X'mas gift.
nice!!! how much did the exhaust set you back?
$190 including shipping, mate
Nice Civic !! :thumbsup: :thumbsup: :thumbsup:
Quote:
Originally Posted by dyljoy
thx for ur comment, Edward
For a new one?!Quote:
Originally Posted by dyljoy
I mean... that's ridiculously cheap compared to the prices I got quoted for the Mugen Silencer (for Civic) at RM2700 (around $900aud).
just replica one from one of ozhonda trader, mate. it made by X-Force. Can't affort just exhaust costs over $900AUD.
Oh... thanks for the info mate. Is it difficult to install? Also wondering if requires welding or if it's catback.
easy job for workshop ppl, it requires welding, not catback.
nice!!..that is sooooo cheap!!
JDM yard selling FUJITA intake, any comment for it? is it worth pay $495 for it?
http://www.ozhonda.com/forum/showthread.php?t=57631
i dunno...never really heard of fujita...i'd go K&N :D
same here, but still wait K&N release...
Hmm... welding not good for warranty. Probably will wait for more options... thinking of doing that Fujitsubo (sp?) exhaust since it seems alright but for now, I'm spending my money on sound system (and still yet to install my new grille/K&N filter!).
JaCe, do u know K&N got intake with filter for our 06 civc?
Fujita is American company . Their products is a high quality , just like Injen , AEM etc.Quote:
Originally Posted by Bob san
Their intake kit came with
6061 T6 Aluminum Intake Tubing with Polished finish /wrinkle black finish
HoseTechniques Silicone hose w/Nomex
High quality Carbon Plated T-bolt hose clamps
Fujita Super Flow High Performance Air Filter
TIG Welded bracketry
Vibration Mounts
Enough said , check out their site , they been around for a while.
http://www.f5air.com/
for the Fujita, is it easy to install? do they come with menu which tell how to install?
You think our warranty will be gone after this? Any1 know what other brand has intake for the new 06 Civic yet?Quote:
Originally Posted by dyljoy
Off topic: any1 read the latest ASM review on Intakes? comments? :p
Warranty? To myself, i really don't care fo it, coz this is my own car, and many frd of mine who own a Honda did it as well, no problem
stock stock stock stock!!! :) laugh i dont care
i would want to ask if i wanna change my front light bulb into those white lights for the 06 civic vti....what is the code of the headlight ..???as i am in hong kong now....
thx all mates~~
hb4 i'm quite sure
also 9006, the same thing, mate
HB4? I thought it was HB3 according to the manual?Quote:
Originally Posted by destrukshn