Hi guys,
Just want to ask for your opinion. Is it fine running on 18x8 ET 40 on an EP3? Which tyre size would you recommend? Do i need to lower the car?
Printable View
Hi guys,
Just want to ask for your opinion. Is it fine running on 18x8 ET 40 on an EP3? Which tyre size would you recommend? Do i need to lower the car?
EP3R:
17 x 8 +35 on 215/45/17 on stock shocks? Any chance or will I need to get something done?
will be perfectly fine, i was running 17 x 7.5 + 35 on mine with stock coils with out any issues before i went over to the te37Quote:
Originally Posted by davetry
Sweet...work emotion 11R's will be added to the shopping list then
Just hoping someone would help with some brainstorming
I have a set of 225/50/16 Dunlop Sport Maxx TT. My brother bought them and couldn't fit them.
For my ep3, I was wondering if its a good idea to find some 16" rims for it for track use.
How would 16" do for performance and/or looks?
I was thinking of getting some integra type r oem wheels dc2/dc5?
If its a good idea, what width rim and offset would fit no probs with stock ep3 suspension?
Cheers
Whats the most narrow tyre you could stretch nicely onto a 17x9.5? 215/45?
215 40 will go too. just depends on how still the tyre wall is. Some stretch well, some dont.
Was with a mate yeaterday who has 225/45 on a 10 wide, and I was previously running 205/45 on a 9.
fd with 17x9 +28 all round?
got coils, natural camber not enough?
guards rolled, but would prolly need camber bolts for the rears yea?
which ones to get?
No such thing as camber bolts for the rear. You should be able to get away with natural camber. I'm 17x9+22 rear and its pretty much just natural camber, however my rear guards are a bit pumped.Quote:
Originally Posted by itachi-kun
Tyres will determine if your scrub at the front. 225's you should be able to get away with.
hello....
can anyone post some photos to show how 18x8.5 et30 235/40/18 look on FN2 please....
Thanks you
Quote:
Originally Posted by xcube
be careful it might rub since being et30
18x8.5jj ETD 38
http://www.civinfo.com/forum/attachm...mg_0659-1-.jpg
http://www.civinfo.com/forum/attachm...mg_0658-1-.jpg
any one know the width and offset for 17" that i would need to get if i run spoon cailpers for ep3 ?