FD/FN2/EP3 Wheel Setup Guide

http://img34.imageshack.us/img34/6305/makt.jpg

Quote:

---

Originally Posted by doosra

Would 17 x 7 +24 on ep3 fit. Car is lowered with no gap. Currently have guards rolled and have 17 x 8 +35 and they fit no issues but concerned 17x7 +24 is too aggressive..
Here's how it currently looks
[IG]http://img407.imageshack.us/img407/7315/nn09.jpg[/IMG]

---

Quote:

---

Originally Posted by doosra

[IMG]http://img34.imageshack.us/img34/6305/makt.jpg[/IG]

---

Merely two posts above yours and you disregarded the post quoted bellow. :-/

Quote:

---

Originally Posted by RPS.13

Found another wheel/tyre fitment calculator, this one also allows you to enter your camber settings and it gives you a diagram of it too!

http://www.fitmywheels.com/

AWESOME!!!

---

To answer your question, I don't think you'll have any problems as your inner clearance is better, but your outer clearance is decreased a tiny bit. (disregard tyre size, I just typed in numbers at random)

http://s21.postimg.org/je88ll8sn/untitled.png

Thanks mate.. That's good news. Great website

Ok. Thanks for the advice

Quote:

---

Originally Posted by lolmclol

Merely two posts above yours and you disregarded the post quoted bellow. :-/



To answer your question, I don't think you'll have any problems as your inner clearance is better, but your outer clearance is decreased a tiny bit. (disregard tyre size, I just typed in numbers at random)

http://s21.postimg.org/je88ll8sn/untitled.png

---

So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.

No camber?

Its my daily so prefer no camber

Quote:

---

Originally Posted by doosra

So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.

---

wat? 7"+24 sticks out the same amount as 8"+35

I think they're actually scrubbing on rear bumper part

Here's how they sit

http://img823.imageshack.us/img823/7477/uzy7.jpg

Seeing as you're already running low on a daily, what's the harm realistically on running camber?

Quote:

---

Originally Posted by doosra

So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.

---

+24 offset is fine. You just need smaller tyres.
get 215/40 next

225/45 on a 7" is too chunky

I'm on 215 not 225.... And going from 45 to 40 will just increase gap between guard and tyre which I don't want..