I would just like to out it out there, i made a cold air intake from my stock em1 air box. If you want pics and instructions on how to do let me know, it quite loud aswell.
Printable View
I would just like to out it out there, i made a cold air intake from my stock em1 air box. If you want pics and instructions on how to do let me know, it quite loud aswell.
hi OP - id just like to make a note for you i just did this job today.
with an eg. you will need
a phillips screwdriver
and a 10mm adapter on a socket wrench if ur not going to use a normal wrench
i ended up having to use a t-handle socket wrench lols, the bolts were so rusted on my p.o.s but the thread wasnt gone :D
but yeah, the hexagonal head screws are 10mm.
so use a 10mm socket if u wanna use the sockets :)
Just bumping up a old thread better then making a new one anyway, How hard is it to remove the resonator without taking off the front bar? i hate taking the bumper off because its a pain in the ass to put back on. Also is it possible to just take the stock airbox off install a SRI and leave the resonator on anyway since it isnt doing anything anyway?
Yeh you can just take off the stock airbox and leave resonator, but it leaves a pipe towards the left and underneath the airbox that might use your sri space. U know how the stock ek airbox has like 2 square boxes, the leftish one has a pipe underneath thats not connecting to anything aswell as the one underneath the airbox, thats what i mean when theres a leftover piping that might take up your space.
http://img72.imageshack.us/img72/9131/airbox.th.jpg
Uploaded with ImageShack.us
Just used the same pic from OP and edited it a li'l
Yeah i know which pipe your talking about the intake i was looking at is a whale penis intake and i think they should fit, i guess it worst comes to worst ill just take out the res thanks for the reply.