Thats alright
So a stock DC2R would be ~100 - 105 ATW?
How much is a dyno tune?
Printable View
Thats alright
So a stock DC2R would be ~100 - 105 ATW?
How much is a dyno tune?
there was another dc2r running with a mugen cat-back.....Quote:
Originally Posted by l3vnd1
only made 101kw atw.... but it had done 145,000kms
dyno day was $40 but if you wanted to dyno your car, it would cost anywhere between $100 - $200 i'm guessing, never asked.....
How did the other DC2Rs run at the Protek dynoday? I have run my car on a dyanamics dyno before (different location in april), and got higher although my car is meant to have less power than yours.Quote:
Originally Posted by Bludger
I only saw 1 other dc2r as said in a few posts prior.....Quote:
Originally Posted by aaronng
a jdm vtir with a few mods made 103kw and an egg with b18cr made 104kw, i saw this car had headers of some brand....
there is no way in hell will i compare my car's run to another dyno run on another day and another location
at the end of the day, its just numbers and i did it because i need a starting reference point b4 i start chasing kw's
about right...Bone stock dc2r of ours before made 105kw atw @ hi comp dyno. After some mods here and there...made 122kw atw.
14.5 Bone stock dc2r
13.6 I/H/E ECU tune dc2r
The EGG with JDM b18c made 116kw atw,
My car on a different day at the pro-tek dyno made 113kw atw..
on behalf of my mate XXXSHO the s15 front widebody dc2.
he made 225 kw atw with turbo set up with fuel upgrades and injectors exhaust etc.
since then has gone forged pistons,rods and has sleeved it with a few more tasty mods...
looking to crack 350-400 kw atw.
Stock B18C2 with CAI 95.6kw atw
my dc2r boosted b18c7 on 8psi made 181kw on hub dyno @ 7000rpm......its got some mechanical issue with vtec (hence, we only rev to 7000rpm not 8500rpm yet).............but once sorted out, it should make close to 200kw at the wheels on same hub dyno...............the tuner may give it 10psi.............we not sure yet..................btw it is running rich as F&*K for safety untill we sort out the vtec issue....................my rear bar is rediculously black................................
so, this is Hub, not atw?
yes it is a hub dyno................Quote:
Originally Posted by Bludger
forgive me for not knowing, but is that the same as how manufacturers get their power figures, at which point in the driveline does the power reading come from????Quote:
Originally Posted by IEVAQ8
i'm not too clear on this...
thanks