yup! you got it. i'm thinking 5 wink mirror next. lolololololQuote:
Originally Posted by ctx
Printable View
yup! you got it. i'm thinking 5 wink mirror next. lolololololQuote:
Originally Posted by ctx
lol stay on topic guys, dont want to be bagging people out here. Their car their mods :)
LOLOLOLOL dat racecar
http://sphotos-b.ak.fbcdn.net/hphoto...22445134_n.jpg
TE37 + R888 for wakefield :)
He kinda brought it on himselfQuote:
Originally Posted by mattsrea
http://indiestatik.com/wp-content/up...underbirds.gifQuote:
Originally Posted by baethos
Hey Guys,
1st time post in here.
Picked up another em1 yesterday
Today
Installed Xforce Twinloop with 2inch Mandrel Bent piping + High Flow Cat (ballistic)
Installed a breather fliter as the previous just had a the rubber intlet hanging in the engine bay
Installed a Pod filter for the lols!
Just tidied up a few loose ends on it as its ready now for a new home
http://sphotos-a.ak.fbcdn.net/hphoto...60041041_n.jpg
got some carbonfibre canards, not sure if they do anything on the track lol.
didn;t bolt them in yet , any one know if it helps at wakefield?
so many clean facelift sedans now, makes me happy and sad lmaoQuote:
Originally Posted by ~Sp33~
They probably do something... but the best thing to get your times down at the track is actual seat time.Quote:
Originally Posted by viinnh
Ye m8 too much downforce , gotta beware of dat snap oversteerQuote:
Originally Posted by viinnh
x2Quote:
Originally Posted by nobbs
such a wpn now charles
hahaha alright thanks
also lifted my ek9 wing but not using them ugly brackets
http://i40.tinypic.com/2991mt.jpg
heres DIY
http://www.ozhonda.com/forum/showthr...36#post3733736
Should've gone for a full under body diffuser if you want to see a noticeable difference in grip/downforce/track times. Canards don't do that much in terms of angle of attack and their main purpose is to re-direct airflow/ create a seal for the diffuser.Quote:
Originally Posted by viinnh
However, they do look awesome :)
Im planning to do the front ply wood splitterQuote:
Originally Posted by FRK202
Plywood then painted with resin would be fine
you could put some fibre sheet if you feel it needs more rigidity
Tape up the ply and use it for a mould, fibreglass over it in a few layer then separate the 2 for a fibreglass diffuser.Quote:
Originally Posted by EKVTIR-T
That easy lol
well sort of
I made my ek look like this the other day http://img.tapatalk.com/d/13/05/08/unytuzap.jpg
Velly goos simmyQuote:
Originally Posted by simmy
nice simmy
BBC lad
Looks good simmy, nice to see more sedans popping up!
quick snaps of the 9 @ the front of nans place for mothers day.
i'm pleased with the results so far
http://img.photobucket.com/albums/v2...ps9b00188e.jpg
also got these, i find the rear ek9 seats abit bland, and i like the look of headrests for the rear seats (also makes the passenger out back abit more comfortable) even tho i never have anyone in the rear
http://img.photobucket.com/albums/v2...ps54b52658.jpg
the painted mugen lip looks good dude. howd the paint end up? and what happened to front bar? :0
Wow she's looking GREAT !!Quote:
Originally Posted by Spoon-Accord
Stock EK9 rear is just same as a CXi etc aint it ?
EK9 rear is same shape as ek1, but has the same fabric as the recaro's in black.Quote:
Originally Posted by VT3C
ek4 rear rare item with headrests
Only an EK9 owner would swap in EK4 seats!! The grass is always greener haha
black housing headlights m8Quote:
Originally Posted by dr1ftaX
finally washed her in awhile :)
https://fbcdn-sphotos-g-a.akamaihd.n...28918644_o.jpg
^^^^ those are all some nice EK's
had to repost sorry but FARK
https://fbcdn-sphotos-g-a.akamaihd.n...28918644_o.jpg[/QUOTE]
nice looking ek guys
done a DIY wing lift on my stock wing ..
Your post is invalid. Please provide pictures.
how come the image doesn't show ?
coz you used the image link url,not the actual image urlQuote:
Originally Posted by iceey
http://mob1160.photobucket.com/album...Xx/image-4.jpg
see
ohh i see .. i see
i've realised alot of the guys up in the states do the same aswell, i thought the ek4 rear seats were in good condition, but the bottom half has 2 ciggy burns and top half is mint!Quote:
Originally Posted by dr1ftaX
i find the ek9 rear seats boring and cxi-ish looking, hence the change over. haven't got time to get around installing them!
Ek9 rear seats any day
Nicer alcantara and pretty sure they're recaro made
today i defrosted my ek
Been busy the past few days working on my ek........
Picked up a OEM ek hood bra fitted it and on the same day ****ed up my front lip getting out of my sisters driveway LOL wanted to get a new lip anyway OEM time :)
http://i1260.photobucket.com/albums/...ps96537266.jpg
Pic was taken at my sisters place which is a work site atm due to renovations...so after that decided it was time for new lip picked up an OEM ek4 lip. I think it looks much cleaner and the fitment is 1000x better than the knock off ek9 lip.
http://i1260.photobucket.com/albums/...ps7987c79c.jpg
Looks much better :) Then on the weekend i picked up and installed new hardrace front lower control arms with harden bushes, hardrace front and rear endlinks, hardrace bushes front and rear and I decided while it was up in the air might as well replace my front brake rotors with RDA dimpled and slotted rotors.
http://i1260.photobucket.com/albums/...ps02b97ce5.jpg
http://i1260.photobucket.com/albums/...psc93a95c4.jpg
Car feels heaps better to drive now and those combined with my upgraded rear sway bar has made a huge diffrence in the way the car handles. I also fitted up my new ceramic coated valve cover but I took no pics as the bay was dirty lol. Last night i turned my attention to the interior. I installed a new fastline shifter and chequered sports gearknob, new steering wheel (96 type r no srs), ek9 cluster and some carbon dash bits.
http://i1260.photobucket.com/albums/...psc003778a.jpg
http://i1260.photobucket.com/albums/...ps4ee2c041.jpg
http://i1260.photobucket.com/albums/...ps60945f65.jpg
Also have the ek9 centre console and drivers side vent. My interior is just abot complete I have the recaro material to do my door trims which will be next on the list of things to do :)
Few More Pics......
Front view showing the lip a bit better:
http://i1260.photobucket.com/albums/...psed577cda.jpg
Some engine bay pics showing the new ceramic coated valve cover and new hybrid racing oil cap:)
http://i1260.photobucket.com/albums/...pse8704673.jpg
Thats a very pretty bay you have thereQuote:
Originally Posted by Rayseuro04
^ Thanks Mate :)
http://i480.photobucket.com/albums/r...05544900_n.jpg
http://i480.photobucket.com/albums/r...23895783_n.jpg
Just a teaser. Access rear lip painted and on. More to come!
http://i1160.photobucket.com/albums/...Xx/image-5.jpg
Lifted it abit more .. It's more noticeable now
Installed some Hella tone horns...... i'm deaf now lol
vid plsQuote:
Originally Posted by Niko
EK has new wheels.
http://farm3.staticflickr.com/2892/8...e1416616_b.jpg
http://www.youtube.com/watch?v=3gLUa9kixbQQuote:
Originally Posted by PHO
Now thats the good stuff.
Hey guise might be noob question but would ek4 rear seats fit in a ek sedan?
I just came back from a roadtrip from Glenelg, and i swear every house looks like this^ in SAQuote:
Originally Posted by baethos
yep, there's a lot of old style houses around...think my house is > 100 years old lol.Quote:
Originally Posted by ~Sp33~
anyway, this.
http://farm8.staticflickr.com/7359/8...12d1a9094b.jpg
my turbos spool up so fast right now.
Picked up a facelift guard for $58 because mine was badly dented.
http://img7.imageshack.us/img7/7873/20130519142524.jpg
I might need to find another for the other side..
You remind me of a girl that I once knewQuote:
Originally Posted by mattsrea
http://cdn1.screenrant.com/wp-conten...Expression.jpgQuote:
Originally Posted by baethos
LOL Da faq!!Quote:
Originally Posted by ctx
Want to go lower but coils are maxed
Wat the fuk
^ pic?
FrontsQuote:
Originally Posted by simmy
what coils simmy?
lower the front rings that hold the spring preload if they are base adjustable... and if theres literally no space.. pull out the spring rings so that the spring itself sits right on the shock base when on the ground.
Yeah its all dropped to the bottom, will have to take out two rings :(Quote:
Originally Posted by eeko
Junk2
http://th03.deviantart.net/fs70/PRE/...ik-d4cxn5a.pngQuote:
Originally Posted by simmy
http://i480.photobucket.com/albums/r...3/IMG_4887.jpg
http://i480.photobucket.com/albums/r...3/IMG_4891.jpg
http://i480.photobucket.com/albums/r...3/IMG_4885.jpg
quick pics of the car now. Oem ek9 front lip, oem hatch grill and oem access rear lip all painted and on the car. Also got my P plates today WOO!
And before anyone says, yes it shall be lowered :D
Pro s v2?Quote:
Originally Posted by simmy
u can get about about 10-15 mm if you take out the lower 2 lock rings, only on front not rear
Yeah non damperQuote:
Originally Posted by grifty
That should be enough though,
Still hunting em1 ek9 lip
Kenny where did you get yours? Pm?
Looks good ay
You're not sitting on the bump stop are you? If they have a progressive bump stop it might be worth replacing it with a shorter/firmer one first.Quote:
Originally Posted by simmy
far kenny, looking good for a sedan! and grats oon Ps
Thanks dood, gf got it forme for my bday haha. from jdmyardQuote:
Originally Posted by simmy
and thanks matt!!
JDMyard EK9 lip. Ballin.
facelift or pre-facelift, if so i got one.Quote:
Originally Posted by simmy
not 2nd hand like us cheap fgtsQuote:
Originally Posted by PHO
grats kenny
Facelift ayQuote:
Originally Posted by MYEK9
my build thread
http://forum.jdmstyletuning.com/show...30#post1390730
installed HID's off ebay
http://i1160.photobucket.com/albums/...eyXx/SHELL.jpg
............