MY GE8 Project

GUESS WHAT Its made in CHINA LOL!!...
easy plug and play ;) only set me up about$150 from ebay Includes shipping.
6000 K hi/lo bixenon. and 30 minutes DIY fitting.

HID all the same (china ones) it will last quiet a while even though not made in japan and you know that china replacement is cheap right? :p AHAHAA..
i have 4 years old HID KIT (1st generation china stuff) and it still works ;)!! until now. never miss a single beat.. and still same stuff no replacement at all for all those years

Oh next to the jazz?
Its a nother HONDA !! LOL!!.. a normal stocky Odyssey 08 Lux in Purple...

nice! 6000k is the best option for HID, not too bright. Odyssey Lux? oh, that's my goal if I want another family car later.

hey the tyres and rims look good actually. doesnt look too stretched.

Quote:

---

Originally Posted by d15z1SUX

hey the tyres and rims look good actually. doesnt look too stretched.

---

Yeah it was all good lol! Just fit flush wit guard. Duno if i can dump it or not. =.=

Quote:

---

Originally Posted by dyljoy

nice! 6000k is the best option for HID, not too bright. Odyssey Lux? oh, that's my goal if I want another family car later.

---

lol



Accord V6L, Jazz VTi & Odyssey L !!! $ bling bling $ :cool:

nice job Chris - i love it when people jump in and start modding brand new model hondas !! bring her over when u pcik her up and we'll takes some new slammed spec photos :P

040501912, icc ,,,cant wait to see your indo style then :cool: always tend to be diff than evryone else

indonesian modifiers always different then main stream :p LOL!!...

UPDATE
Coilovers are in! WOO HOO!!..
the only problem was, the rear cant be lowered more..
we took out the adjuster.. and this is what we got ;)
if adjuster was in .. its going to be about 15-20 mm higher than what is it now.

HANDLING is IMPROVED BY HEAPS!!!..
the car corner with out under steer and the tail of the car just follow ;) say .. 40 50 - kmh corner its just like the way you want the car to be..

note: i stil use stock tyre :p and the front dumped to the limit..
3-4 ppl sit front will rub when corners hard. (rubs but not much *not that bad*)
1-2 is just fine ;) with out any rubs..

the pictures are dirty.. car jsut got home .... will make a photo shoot ;) and post a clean 1 if i have time.

http://i484.photobucket.com/albums/r...4112008271.jpg
http://i484.photobucket.com/albums/r...4112008272.jpg
http://i484.photobucket.com/albums/r...4112008273.jpg

nice drop by coilover. I wish I can get coilover one day when weak aud get stronger...

wow thats low lol...
i m guessing u will have problems after u change ur tyres

Quote:

---

Originally Posted by 040501912

indonesian modifiers always different then main stream :p LOL!!...

UPDATE
Coilovers are in! WOO HOO!!..
the only problem was, the rear cant be lowered more..
we took out the adjuster.. and this is what we got ;)
if adjuster was in .. its going to be about 15-20 mm higher than what is it now.

HANDLING is IMPROVED BY HEAPS!!!..
the car corner with out under steer and the tail of the car just follow ;) say .. 40 50 - kmh corner its just like the way you want the car to be..

note: i stil use stock tyre :p and the front dumped to the limit..
3-4 ppl sit front will rub when corners hard. (rubs but not much *not that bad*)
1-2 is just fine ;) with out any rubs..

the pictures are dirty.. car jsut got home .... will make a photo shoot ;) and post a clean 1 if i have time.

http://i484.photobucket.com/albums/r...4112008271.jpg
http://i484.photobucket.com/albums/r...4112008272.jpg
http://i484.photobucket.com/albums/r...4112008273.jpg

---

sory but wats the brand of the coilover???? mind asking how much it costs??? thanks...

also, is the ground level??? seems that the rear sits higher than the front.....

looks hot man...