To Mod a Civic VTI-R n tune it with Apexi POWER FC any experience?

Quote:

---

Originally Posted by ATSEK4

hmm.. i agree with the evidence you provided THX for helping .. i will still give it a try as it doesn't cost me extra anyway.. then i will get a refund if i can.. anyway i will let you know.

I am planning to book in and adjust/check my valve clearence, as that shop was trying to put 0.4 clearlance like standard, but after i said it is 0.2 cold and they said really? and look at the tools and said.. oh yea it was 0.2.. my mistake.. :confused: i have no idea.

I am pretty sure what i have done is completly right.. as i did a lot of research.. just the tuning and the cam should make sure i was installed correctly.

---

We will need to keep the car for whole day... or even better over night...because all cylinder will be cooled down and have equal temperture thus the adjustment can be more accurate...

Since you have the LSD already...ask the installer before they open up the gear box...because it will be cheaper for you....

Quote:

---

Originally Posted by ATSEK4

thatz a big difference.. that was with the B16A or B18c engine?
so 16.2 with B16a, and 14.8 with b16a and itr gear box only? thx !

---

with B16A2 AUDM VTiR hatch

Quote:

---

Originally Posted by ENDLESS

We will need to keep the car for whole day... or even better over night...because all cylinder will be cooled down and have equal temperture thus the adjustment can be more accurate...

Since you have the LSD already...ask the installer before they open up the gear box...because it will be cheaper for you....

---

Thx chris.. I thought i gotta open the gear box to install everything. hey have u got any comment about BP or Shell? say something in the other topic called BP vs shell ! thx !

Quote:

---

Originally Posted by Civic Type R

with B16A2 AUDM VTiR hatch

---

Thatz really kool.. have u tried with your B18C ?

14.2 with the same 60' times

Quote:

---

Originally Posted by Civic Type R

14.2 with the same 60' times

---

:eek: :thumbsup:

Quote:

---

Originally Posted by Civic Type R

14.2 with the same 60' times

---

thatz really quick !

Quote:

---

Originally Posted by ATSEK4

Thx chris.. I thought i gotta open the gear box to install everything.

---

you don't have to open the gearbox to install clutch or flywheel

and if you buy a 4.9 make sure it is for ek4

Quote:

---

Originally Posted by tanghy

you don't have to open the gearbox to install clutch or flywheel

---

i know... not was not saying the clutch and flywheel.. the everything means the final gear.. and lsd.. thx anyway !

Quote:

---

Originally Posted by tanghy

and if you buy a 4.9 make sure it is for ek4

---

Yes it is for EK4, for B16A2..

you got experience on putting final gear ? tell me how you feel thx !!!

Well done!! Hope you can success!! Good luck!!!!!!!!!!!!!!!!!!!!!